English
15 ml oral spray aerosol can with directional fine-mist actuator, cap removed, shown against a clean neutral background

15 ml Oral Spray Aerosol Can for Mouth Mist and Breath Freshening Formats

Anything that enters a mouth raises a different set of questions than a body spray does. The interior coating, the volume released per press and the instruction to spit rather than swallow all have to be settled before artwork is drawn. A 15 ml body makes those decisions visible, because there is very little fill available to absorb a mistake.

  • Place of originChina
  • Diameter range22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
  • PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
  • Port of loadingGuangzhou / Shenzhen / Ningbo / Shanghai
  • MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
  • Payment termsT/T, L/C, PayPal, Western Union — for your selection
  • Trade termEXW / DAP / DDP

Product Description

Anything that enters a mouth raises a different set of questions than a body spray does. The interior coating, the volume released per press and the instruction to spit rather than swallow all have to be settled before artwork is drawn. A 15 ml body makes those decisions visible, because there is very little fill available to absorb a mistake.

Key format data: 15 ml nominal capacity. Typical filling applications are oral spray, mouth mist, medical spray. Other heights and diameters in the same family can be quoted on request, so the size listed here is a starting point rather than a limit.

This aluminium container is produced in-house from aluminium slug to finished printed can. Body forming, shoulder shaping, internal coating, printing and final inspection all run on the same line, so the wall thickness and pressure performance stay consistent from the first sample to the last pallet of a bulk order.

We supply cans only, or a complete package with valve, actuator and cap selected to match your formulation and filling equipment. Free blank samples are available so your laboratory can confirm pressure, spray rate and compatibility before you commit to tooling or a production run.

Specifications

MaterialAluminium 99.5% (one-piece / monobloc body)
DiameterRecommended based on your requirements
HeightRecommended based on your requirements
Nominal volume / weight15 ml
Neck / valve sizeRecommended based on your requirements
Shoulder shapeRecommended based on your requirements
Recommended contentsOral spray, mouth mist, medical spray
Internal coatingFood-grade internal lacquer on request
PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
Surface finishHigh gloss / matte / pearl / metallic lacquer
CapPlastic cap — colour matched to your artwork
PackingCarton + pallet, or as per customer instruction
MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
Lead time15–30 days after sample approval

Final specifications are confirmed against your artwork and filling line before tooling.

Product Features

  • The internal lacquer is the first specification rather than an option, and it has to cover dome, wall and base so the fill never meets bare aluminium at any liquid level.
  • A metered valve releases a fixed chamber per press; on a 15 ml body that is what stops a consumer taking an uncontrolled mouthful on the very first use.
  • Mist rather than stream. A fine insert produces a soft cloud that lands where it is aimed, while a coarse port would send liquid to the back of the throat.
  • The actuator is directional and indexed to the label, since a free-spinning button lets the spray strike the cheek instead of the intended inside surface.
  • Label space is the binding constraint at 15 ml: the caution line, the dose statement and the ingredient list all compete for one small circumference.
  • A short body with a small fill leaves proportionally large headspace, so fill height and crimp depth are set together to keep pressure behaviour predictable to the last dose.

Application Scenarios

Breath & Mouth Mist

A cosmetic freshening spray applied to the inside of the cheek; the metered dose and fine mist suit a product reached for several times a day.

Travel Oral Care

Cabin and overnight kits carry a small can where a bottle would leak, and a crimped valve has no pump to prime after a flight.

Counter Sampling

Trial sizes let a customer test the mist and the dose without opening a saleable unit, while 15 ml keeps the giveaway cost bounded.

Own-Brand Oral Lines

Brands extending a mouthwash range into a spray use this body as the smallest SKU, printed to match the larger bottles beside it.

Samples & MOQ

Free Blank Samples

Blank cans are supplied free of charge — you only cover the courier cost. Use them to test pressure, spray rate and formulation compatibility.

MOQ 10,000 pcs

Standard MOQ is 10,000 pieces per size and design. Smaller trial quantities can be discussed for a first production run.

Sampling In 3–7 Days

Printed samples typically take 3–7 days. Mass production follows 15–30 days after you approve the pre-production sample.

Customization Options

DiameterStandard range 22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
HeightCustom height from 90 mm to 300 mm (subject to diameter)
Printing1–9 colours offset or silkscreen, plus lacquer and vacuum coating
ValveOne-inch continuous / metered / bag-on-valve, matched to your formulation
CapStandard or custom moulded cap, any colour
SamplesFree blank samples for compatibility testing; printed samples charged

Frequently Asked Questions

For any fill that enters the mouth, food-grade internal lacquer should be treated as the baseline. It is available on request and applied before the valve is crimped.

Through the valve, not through actuator travel. A metered stem releases one chamber per press and resets only when the button is released.

No claim of that kind is made here. The item is a packaging component; product classification and label wording in each market remain with the buyer.

That the spray is for oral application only, that it must not be swallowed, and how many presses make one dose. Those three lines are usually raised first in review.