English
120 ml personal care aerosol can, 45 mm diameter and 120 mm high, standing upright with cap fitted against a neutral studio background

120 ml Personal Care Aerosol Can, Φ45 × 120 mm, for Antiperspirant and Body Mist

Forty-five millimetres across and 120 tall is close to the footprint of a deodorant stick, so this body drops into an existing retail slot without asking anyone to redraw the shelf. The proportions suit a can that is held in one hand, used in a single motion, capped and returned to a bag. What the format constrains is print area and valve land, not fill volume.

  • Place of originChina
  • Diameter range22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
  • PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
  • Port of loadingGuangzhou / Shenzhen / Ningbo / Shanghai
  • MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
  • Payment termsT/T, L/C, PayPal, Western Union — for your selection
  • Trade termEXW / DAP / DDP

Product Description

Forty-five millimetres across and 120 tall is close to the footprint of a deodorant stick, so this body drops into an existing retail slot without asking anyone to redraw the shelf. The proportions suit a can that is held in one hand, used in a single motion, capped and returned to a bag. What the format constrains is print area and valve land, not fill volume.

Key format data: 45 mm diameter and 120 mm overall height; 120 ml nominal capacity; a 1 inch (25.4 mm) neck. Typical filling applications are antiperspirant, hand sanitizer, dry shampoo. Other heights and diameters in the same family can be quoted on request, so the size listed here is a starting point rather than a limit.

This 45 mm diameter aluminium container is produced in-house from aluminium slug to finished printed can. Body forming, shoulder shaping, internal coating, printing and final inspection all run on the same line, so the wall thickness and pressure performance stay consistent from the first sample to the last pallet of a bulk order.

We supply cans only, or a complete package with valve, actuator and cap selected to match your formulation and filling equipment. Free blank samples are available so your laboratory can confirm pressure, spray rate and compatibility before you commit to tooling or a production run.

Specifications

MaterialAluminium 99.5% (one-piece / monobloc body)
Diameter45 mm
Height120 mm
Nominal volume / weight120 ml
Neck / valve size1 inch (25.4 mm)
Shoulder shapeSloped shoulder
Recommended contentsAntiperspirant, hand sanitizer, dry shampoo
Internal coatingFood-grade internal lacquer on request
PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
Surface finishHigh gloss / matte / pearl / metallic lacquer
CapPlastic cap — colour matched to your artwork
PackingCarton + pallet, or as per customer instruction
MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
Lead time15–30 days after sample approval

Final specifications are confirmed against your artwork and filling line before tooling.

Product Features

  • At 45 mm across, the shoulder curve begins close to the wall, so the printable band is short and artwork is usually set as one wrap with no secondary panel.
  • A 120 mm overall height puts the actuator inside a closed fist, and a cap that needs two hands to pull will be the part customers complain about.
  • One-piece seamless aluminium leaves no welded side seam to shadow the print, which shows when a full-wrap design crosses the back of a narrow can.
  • The short cylinder holds shape under pressure with less unsupported wall between base and shoulder than a 200 mm body carries above its fill line.
  • Suspension antiperspirant settles in the can, so the base has to take hard shaking; a one-piece dome has no joint that can work loose under that treatment.
  • 9-colour direct printing around 45 mm forces tight registration, and fine type fills in below a certain size, so ingredient legends move to carton or back label.

Application Scenarios

Antiperspirant & Deodorant

A 120 ml body is a familiar deodorant size; the short burst and quick-drying mist suit an underarm application made in front of a mirror.

Travel & Gym Kits

Dopp kits and gym bags take the 45 mm cylinder without a dedicated pouch, and the flush cap does not catch on a zip.

Hotel Amenities

Properties specifying single-use amenities place small cans in a tray; the 120 mm height lines up with shampoo bottles of the same nominal size.

Grooming Ranges

Body sprays in a grooming line share this diameter with balms and washes, so one shelf strip can hold the range on a single footprint.

Samples & MOQ

Free Blank Samples

Blank cans are supplied free of charge — you only cover the courier cost. Use them to test pressure, spray rate and formulation compatibility.

MOQ 10,000 pcs

Standard MOQ is 10,000 pieces per size and design. Smaller trial quantities can be discussed for a first production run.

Sampling In 3–7 Days

Printed samples typically take 3–7 days. Mass production follows 15–30 days after you approve the pre-production sample.

Customization Options

DiameterStandard range 22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
HeightCustom height from 90 mm to 300 mm (subject to diameter)
Printing1–9 colours offset or silkscreen, plus lacquer and vacuum coating
ValveOne-inch continuous / metered / bag-on-valve, matched to your formulation
CapStandard or custom moulded cap, any colour
SamplesFree blank samples for compatibility testing; printed samples charged

Frequently Asked Questions

Not universally. Several carriers cap cabin liquids at 100 ml, so a 120 ml fill is usually sold as checked luggage or domestic travel. The market claim stays with the buyer.

The standard 1 inch (25.4 mm) crimp. The dome land is narrow, so crimp depth is checked batch by batch rather than carried over from a wider can.

Not quite. Direct print stops at the shoulder break and the base rim, so a wrap design needs a deliberate break line or a cap colour picked to close it.

10,000 pcs per size and design at standard specification, 20,000 pcs for custom printing or a bespoke dimension. Blank samples before tooling ship in 3–7 days.