English
150ml Aluminium Aerosol Can for Hydrating Mist and Body Spray

150ml Aluminium Aerosol Can for Hydrating Mist and Body Spray

150 ml aluminium aerosol can for hydrating mist and all-over body spray — a mid size supplied with a fine mist actuator and one-inch valve as one set.

  • Place of originChina
  • Diameter range22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
  • PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
  • Port of loading[YOUR PORT, CHINA]
  • MOQ10,000 pcs per size and design
  • Payment terms[T/T 30% deposit, balance against B/L copy; L/C at sight]
  • Trade termEXW / DAP / DDP
Send Inquiry Chat on WhatsApp

Product Description

150 ml aluminium aerosol can for hydrating mist and all-over body spray — a mid size supplied with a fine mist actuator and one-inch valve as one set.

Key format data: 150 ml nominal capacity. Typical filling applications are hydrating mist, body mist, all-over spray. Other heights and diameters in the same family can be quoted on request, so the size listed here is a starting point rather than a limit.

This aluminium container is produced in-house from aluminium slug to finished printed can. Body forming, shoulder shaping, internal coating, printing and final inspection all run on the same line, so the wall thickness and pressure performance stay consistent from the first sample to the last pallet of a bulk order.

We supply cans only, or a complete package with valve, actuator and cap selected to match your formulation and filling equipment. Free blank samples are available so your laboratory can confirm pressure, spray rate and compatibility before you commit to tooling or a production run.

Specifications

MaterialAluminium 99.5% (one-piece / monobloc body)
DiameterRecommended based on your requirements
HeightRecommended based on your requirements
Nominal volume / weight150 ml
Neck / valve sizeRecommended based on your requirements
Shoulder shapeRecommended based on your requirements
Recommended contentsHydrating mist, body mist, all-over spray
Internal coating[Food-grade internal lacquer on request]
PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
Surface finishHigh gloss / matte / pearl / metallic lacquer
Cap[Plastic cap] — colour matched to your artwork
Packing[Carton + pallet, or as per customer instruction]
MOQ10,000 pcs per size and design
Lead time[25–35] days after sample approval

All values are placeholder examples — confirm the final specification with our engineering team before ordering.

Product Features

  • 150 ml capacity — a mid size for hydrating mist and all-over body spray
  • Fine mist actuator with a one-inch valve, supplied as one set
  • Recommended for hydrating mist, body mist and all-over spray formulas
  • One-piece seamless aluminium body with no side seam and no leakage path
  • Direct multi-colour printing on glossy, matte, pearlescent or metallic finishes
  • Free blank samples for pressure and spray-pattern testing before tooling

Application Scenarios

Facial Mist & Toner

Facial mist, toner and setting spray lines.

Hydrating & Body Mist

Hydrating mist and all-over body spray products.

Sunscreen & After-Sun

Sunscreen, continuous spray and after-sun formats.

Hair Spray & Styling

Hair spray, styling spray and hair mist products.

Samples & MOQ

Free Blank Samples

Blank cans are supplied free of charge — you only cover the courier cost. Use them to test pressure, spray rate and formulation compatibility.

MOQ 10,000 pcs

Standard MOQ is 10,000 pieces per size and design. Smaller trial quantities can be discussed for a first production run.

Sampling In [7–12] Days

Printed samples typically take [7–12] days. Mass production follows [25–35] days after you approve the pre-production sample.

Customization Options

DiameterStandard range 22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
HeightCustom height from 90 mm to 300 mm (subject to diameter)
Printing1–9 colours offset or silkscreen, plus lacquer and vacuum coating
ValveOne-inch continuous / metered / bag-on-valve, matched to your formulation
CapStandard or custom moulded cap, any colour
SamplesFree blank samples for compatibility testing; printed samples charged

Frequently Asked Questions

Our standard MOQ is 10,000 pieces per size and design. Smaller trial quantities can be discussed for a first production run.

Yes. We provide free blank samples so you can run pressure and formulation tests. Printed samples are charged at cost and the fee is refunded against your first bulk order.

Sampling usually takes [7–12] days. Mass production takes [25–35] days after you approve the pre-production sample, depending on quantity and printing complexity.

You May Also Like