100 ml Aluminium Aerosol Can for Daily Facial Mist and Toner Layering
Most toners and essence mists are watery, and a valve built for body spray turns them into a wet stripe across the cheek. The 100 ml body here is set up around a fine-mist actuator, so the pack can be held at reading distance and still land as an even layer that dries before it runs.
- Place of originChina
- Diameter range22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
- PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
- Port of loadingGuangzhou / Shenzhen / Ningbo / Shanghai
- MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
- Payment termsT/T, L/C, PayPal, Western Union — for your selection
- Trade termEXW / DAP / DDP
Product Description
Most toners and essence mists are watery, and a valve built for body spray turns them into a wet stripe across the cheek. The 100 ml body here is set up around a fine-mist actuator, so the pack can be held at reading distance and still land as an even layer that dries before it runs.
Key format data: 100 ml nominal capacity. Typical filling applications are facial mist, toner, setting spray. Other heights and diameters in the same family can be quoted on request, so the size listed here is a starting point rather than a limit.
This aluminium container is produced in-house from aluminium slug to finished printed can. Body forming, shoulder shaping, internal coating, printing and final inspection all run on the same line, so the wall thickness and pressure performance stay consistent from the first sample to the last pallet of a bulk order.
We supply cans only, or a complete package with valve, actuator and cap selected to match your formulation and filling equipment. Free blank samples are available so your laboratory can confirm pressure, spray rate and compatibility before you commit to tooling or a production run.
Specifications
| Material | Aluminium 99.5% (one-piece / monobloc body) |
|---|---|
| Diameter | Recommended based on your requirements |
| Height | Recommended based on your requirements |
| Nominal volume / weight | 100 ml |
| Neck / valve size | Recommended based on your requirements |
| Shoulder shape | Recommended based on your requirements |
| Recommended contents | Facial mist, toner, setting spray |
| Internal coating | Food-grade internal lacquer on request |
| Printing | Up to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating |
| Surface finish | High gloss / matte / pearl / metallic lacquer |
| Cap | Plastic cap — colour matched to your artwork |
| Packing | Carton + pallet, or as per customer instruction |
| MOQ | 10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications |
| Lead time | 15–30 days after sample approval |
Final specifications are confirmed against your artwork and filling line before tooling.
Product Features
- A 1-inch (25.4 mm) crimp valve is paired with a narrow-orifice actuator; the smaller bore shears the liquid into a tighter droplet band instead of pushing out a cone of coarse drops.
- Hold distance matters more than internal pressure at this fill size: at 15 to 20 cm the mist wets the skin before droplets can merge, which is what keeps the surface free of visible beads.
- Discharge per actuation is kept low on purpose. Three light passes across the face use less liquid than one heavy pass, and the skin dries without a tacky film sitting on top of it.
- Because the container is drawn as a single seamless piece, there is no side seam for toner residue to collect in, and the interior wipes clean between filling runs and colour changes.
- At 100 ml the pack sits inside cabin limits in most markets and still leaves headspace for the propellant phase, so a travel-retail listing does not need a second body size.
- Decoration runs to nine colours direct on the body, which lets a toner line carry its own shade coding on the metal rather than on a shrink sleeve that can lift at the shoulder.
Application Scenarios
Toner and essence layering
Applied after cleansing at arm's length, the mist lays an even film that the next serum can sit on. Brands pair it with this fill size for regimen kits.
Setting between makeup steps
A light pass over powder settles loose pigment without dragging it. Low output per press matters here, since a heavy spray would pool at the hairline and jaw.
Cabin and desk format
A small fill volume and compact body suit airline pouches and open-plan desks, where a full-size bottle is awkward to carry and harder to justify.
Facial device refill
Some brands ship the can alongside a handheld misting device and use the 1-inch crimp as the common interface, so one filling line covers both pack formats.
Samples & MOQ
Free Blank Samples
Blank cans are supplied free of charge — you only cover the courier cost. Use them to test pressure, spray rate and formulation compatibility.
MOQ 10,000 pcs
Standard MOQ is 10,000 pieces per size and design. Smaller trial quantities can be discussed for a first production run.
Sampling In 3–7 Days
Printed samples typically take 3–7 days. Mass production follows 15–30 days after you approve the pre-production sample.
Customization Options
| Diameter | Standard range 22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm |
|---|---|
| Height | Custom height from 90 mm to 300 mm (subject to diameter) |
| Printing | 1–9 colours offset or silkscreen, plus lacquer and vacuum coating |
| Valve | One-inch continuous / metered / bag-on-valve, matched to your formulation |
| Cap | Standard or custom moulded cap, any colour |
| Samples | Free blank samples for compatibility testing; printed samples charged |
Frequently Asked Questions
Clogging usually comes from film-formers and salts drying at the outlet, not from water itself. Ask for the actuator to be matched to your solids level, and specify an overcap that seals the nozzle between uses.
Yes, but the valve and actuator should change with the formula. A setting spray carrying polymers needs a wider bore than a pure toner, otherwise output falls as polymer builds on the orifice wall.
Standard sizes begin at 10,000 pcs per size and design; a bespoke body or custom print moves to 20,000 pcs. Blank samples can be sent before tooling so the spray pattern is judged on your own formula.
Pressure and burst behaviour are tested in house batch by batch, and pattern checks run on filled samples during the 3 to 7 day sample stage, so actuator choice is settled well before the 15 to 30 day production window.
You May Also Like
-
150 ml Aluminium Aerosol Can for Continuous Hydrating Body Mist
150 ml · fine mist · all-over spray
-
200 ml Aluminium Aerosol Can for Body Sunscreen Emulsion Spray
200 ml · BOV / continuous spray
-
300 ml Aluminium Aerosol Can for Strong-Hold Styling Finish
300 ml · strong hold · 1-inch valve