English
100 ml silver aluminium oxygen canister standing upright on a dark studio surface, black valve cap fitted, split ring clipped through the base groove.

100 ml Aluminium Oxygen Canister for Pocket Carry and Keyring Mounting

Pocket formats are the hardest to keep sealed, because a canister that rides in a jacket or a bag gets knocked, compressed and dropped far more than one that sits on a shelf. A one-piece drawn aluminium shell removes the seam that would otherwise be the first point of movement. Supplied for non-medical supplemental use; market-specific requirements are the buyer's responsibility to confirm.

  • Place of originChina
  • Diameter range22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
  • PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
  • Port of loadingGuangzhou / Shenzhen / Ningbo / Shanghai
  • MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
  • Payment termsT/T, L/C, PayPal, Western Union — for your selection
  • Trade termEXW / DAP / DDP

Product Description

Pocket formats are the hardest to keep sealed, because a canister that rides in a jacket or a bag gets knocked, compressed and dropped far more than one that sits on a shelf. A one-piece drawn aluminium shell removes the seam that would otherwise be the first point of movement. Supplied for non-medical supplemental use; market-specific requirements are the buyer's responsibility to confirm.

Key format data: 100 ml nominal capacity. Typical filling applications are oxygen, compressed air. Other heights and diameters in the same family can be quoted on request, so the size listed here is a starting point rather than a limit.

This aluminium container is produced in-house from aluminium slug to finished printed can. Body forming, shoulder shaping, internal coating, printing and final inspection all run on the same line, so the wall thickness and pressure performance stay consistent from the first sample to the last pallet of a bulk order.

We supply cans only, or a complete package with valve, actuator and cap selected to match your formulation and filling equipment. Free blank samples are available so your laboratory can confirm pressure, spray rate and compatibility before you commit to tooling or a production run.

Specifications

MaterialAluminium 99.5% (one-piece / monobloc body)
DiameterRecommended based on your requirements
HeightRecommended based on your requirements
Nominal volume / weight100 ml
Neck / valve sizeRecommended based on your requirements
Shoulder shapeRecommended based on your requirements
Recommended contentsOxygen, compressed air
Internal coatingFood-grade internal lacquer on request
PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
Surface finishHigh gloss / matte / pearl / metallic lacquer
CapPlastic cap — colour matched to your artwork
PackingCarton + pallet, or as per customer instruction
MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
Lead time15–30 days after sample approval

Final specifications are confirmed against your artwork and filling line before tooling.

Product Features

  • The shell is drawn in a single stroke from 99.5% aluminium, so shoulder, wall and base are continuous, with no circumferential weld to fatigue when the unit is squeezed in a pocket.
  • Valve crimp is set to the standard 1-inch (25.4 mm) cup and checked with a go/no-go gauge at the start of each filling shift, then again at the end.
  • A flat, machined neck face lets the valve gasket seat on metal rather than on coating, which keeps the seal stable through repeated cap removal in the field.
  • Filled units pass an in-house hold test batch by batch, and any can that drifts is pulled before packing rather than being found by the end user.
  • The base knuckle carries a slight inward roll, which gives a short canister a foot ring that sits flat on a rock, a shelf or a van floor.
  • An under-cap lanyard groove takes a split ring or a carabiner, so the actuator stays covered while the canister hangs from a belt loop or pack strap.

Application Scenarios

Jacket and trouser pockets

A body this short sits flat in a jacket pocket without levering against the seam. The recessed valve keeps the actuator from being pressed by keys or a phone.

Keyring and lanyard carry

Split-ring mounting at the base groove lets staff clip a unit to a belt loop, where it hangs valve-up and stays visible through a shift.

Running and cycling vests

Vest pockets compress whatever they hold. The straight wall and rolled base knuckle keep the shell from ovalising under that steady, localised load.

Event and rental packs

Short event runs can be built from blank silver stock and printed to a dated design, which suits organisers who do not want a standing catalogue line.

Samples & MOQ

Free Blank Samples

Blank cans are supplied free of charge — you only cover the courier cost. Use them to test pressure, spray rate and formulation compatibility.

MOQ 10,000 pcs

Standard MOQ is 10,000 pieces per size and design. Smaller trial quantities can be discussed for a first production run.

Sampling In 3–7 Days

Printed samples typically take 3–7 days. Mass production follows 15–30 days after you approve the pre-production sample.

Customization Options

DiameterStandard range 22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
HeightCustom height from 90 mm to 300 mm (subject to diameter)
Printing1–9 colours offset or silkscreen, plus lacquer and vacuum coating
ValveOne-inch continuous / metered / bag-on-valve, matched to your formulation
CapStandard or custom moulded cap, any colour
SamplesFree blank samples for compatibility testing; printed samples charged

Frequently Asked Questions

The valve, not the volume, is usually the cause. A crimp sitting a fraction off centre lets the gasket creep, and the loss shows long before the body is empty. That is why we gauge the crimp at both ends of a shift.

No. The cup is crimped once at filling and the joint is not designed to be broken and remade. Plan the 100 ml format as a single-use unit.

Standard specification starts at 10,000 pcs per size and design. Orders that carry custom printing or a bespoke specification move to 20,000 pcs.

The straight wall takes 9-colour direct printing. The dome is left clear on most 100 ml jobs, because a small curved panel breaks fine type.