200 / 300 ml Food-Grade Aluminium Aerosol Can Set for Dual Retail Formats
Running two pack sizes from one tooling family is a procurement decision before it is a design one. The 200 ml and 300 ml bodies here share a neck, a valve cup and a crimp setting, so one filling line can run both without re-tooling the seamer. What differs is body length, and the shelf each length is meant to serve.
- Place of originChina
- Diameter range22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
- PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
- Port of loadingGuangzhou / Shenzhen / Ningbo / Shanghai
- MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
- Payment termsT/T, L/C, PayPal, Western Union — for your selection
- Trade termEXW / DAP / DDP
Product Description
Running two pack sizes from one tooling family is a procurement decision before it is a design one. The 200 ml and 300 ml bodies here share a neck, a valve cup and a crimp setting, so one filling line can run both without re-tooling the seamer. What differs is body length, and the shelf each length is meant to serve.
Key format data: 200 ml / 300 ml nominal capacity; a 1 inch (25.4 mm) neck. Typical filling applications are olive oil, cooking oil, grilling spray. Other heights and diameters in the same family can be quoted on request, so the size listed here is a starting point rather than a limit.
This aluminium container is produced in-house from aluminium slug to finished printed can. Body forming, shoulder shaping, internal coating, printing and final inspection all run on the same line, so the wall thickness and pressure performance stay consistent from the first sample to the last pallet of a bulk order.
We supply cans only, or a complete package with valve, actuator and cap selected to match your formulation and filling equipment. Free blank samples are available so your laboratory can confirm pressure, spray rate and compatibility before you commit to tooling or a production run.
Specifications
| Material | Aluminium 99.5% (one-piece / monobloc body) |
|---|---|
| Diameter | Recommended based on your requirements |
| Height | Recommended based on your requirements |
| Nominal volume / weight | 200 ml / 300 ml |
| Neck / valve size | 1 inch (25.4 mm) |
| Shoulder shape | Recommended based on your requirements |
| Recommended contents | Olive oil, cooking oil, grilling spray |
| Internal coating | Food-grade internal lacquer on request |
| Printing | Up to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating |
| Surface finish | High gloss / matte / pearl / metallic lacquer |
| Cap | Plastic cap — colour matched to your artwork |
| Packing | Carton + pallet, or as per customer instruction |
| MOQ | 10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications |
| Lead time | 15–30 days after sample approval |
Final specifications are confirmed against your artwork and filling line before tooling.
Product Features
- Both bodies are cut for the standard 1 inch (25.4 mm) crimp, so one seamer setting covers the pair and changeover becomes a height adjustment rather than a parts swap.
- The set ships complete with can, valve, actuator and cap. Matched components remove the tolerance stack that appears when a filler sources each part separately.
- 200 ml carries a trial or gift SKU, 300 ml carries the repeat purchase. One artwork grid and two plate sets keep the range reading as a family on shelf.
- A shared shoulder profile means the same cap and the same case divider fit both heights, so a mixed pallet needs one packaging specification instead of two.
- Food-grade internal lacquer is available for both bodies to a single specification, which saves a buyer from qualifying two interiors before the first run.
- Ordering the pair together still meets 10,000 pcs per size and design at standard specification; bespoke print or an altered dimension moves the line to 20,000 pcs.
Application Scenarios
Two-Line Filling
A filler running both heights needs one set of change parts and one crimp setting, so output follows the order book rather than a tooling schedule.
Range Launch
Launch a 200 ml trial and a 300 ml household pack together; shared print boundaries keep the two faces aligned when they stand side by side.
Private Label Kits
Own-brand programmes buy the set as components and fill under their own label; matched valve and cap shorten setup on the first production run.
Buyer Sampling
A buyer qualifying a new oil uses the 200 ml for panel trials and holds the 300 ml for launch volume, with no second supplier to audit.
Samples & MOQ
Free Blank Samples
Blank cans are supplied free of charge — you only cover the courier cost. Use them to test pressure, spray rate and formulation compatibility.
MOQ 10,000 pcs
Standard MOQ is 10,000 pieces per size and design. Smaller trial quantities can be discussed for a first production run.
Sampling In 3–7 Days
Printed samples typically take 3–7 days. Mass production follows 15–30 days after you approve the pre-production sample.
Customization Options
| Diameter | Standard range 22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm |
|---|---|
| Height | Custom height from 90 mm to 300 mm (subject to diameter) |
| Printing | 1–9 colours offset or silkscreen, plus lacquer and vacuum coating |
| Valve | One-inch continuous / metered / bag-on-valve, matched to your formulation |
| Cap | Standard or custom moulded cap, any colour |
| Samples | Free blank samples for compatibility testing; printed samples charged |
Frequently Asked Questions
Yes. Both are cut for the standard 1 inch (25.4 mm) crimp and accept the same stem, and the set is supplied with valves and actuators already matched to each body.
The layout grid can be shared, the plates cannot. Body length differs, so type size and the print boundary must be re-set for each height before proofing.
10,000 pcs per size and design at standard specification, 20,000 pcs where the print or a dimension is bespoke. The pair is quoted as a single line.
No. Cans, valves, actuators and caps ship as components for the customer's own filling operation. Lacquer is specified at the can stage, before any valve is crimped on.
You May Also Like
-
300 ml Edible Oil Mousse Aerosol Can for Foaming Culinary Oils, Φ53 × 200 mm
D53 × H200 mm · 300 ml · food use
-
300 ml Culinary Oil Aerosol Can for Pan Seasoning and Griddle Release
300 ml · BOV · food-grade coating
-
200 ml Olive Oil Aerosol Can for Finishing and Dressing Oils
200 ml · food-grade coating · cooking spray