300 ml Edible Oil Mousse Aerosol Can for Foaming Culinary Oils, Φ53 × 200 mm
Oil does not foam the way a water-based mix does, and a can built for whipped cream will not change that. What decides the result is how the propellant is held inside the oil phase before the valve opens, and how fast the structure drains once it meets a hot surface. The 53 mm body here leaves the fill head and valve cup enough room to handle a heavier, gassier product.
- Place of originChina
- Diameter range22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
- PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
- Port of loadingGuangzhou / Shenzhen / Ningbo / Shanghai
- MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
- Payment termsT/T, L/C, PayPal, Western Union — for your selection
- Trade termEXW / DAP / DDP
Product Description
Oil does not foam the way a water-based mix does, and a can built for whipped cream will not change that. What decides the result is how the propellant is held inside the oil phase before the valve opens, and how fast the structure drains once it meets a hot surface. The 53 mm body here leaves the fill head and valve cup enough room to handle a heavier, gassier product.
Key format data: 53 mm diameter and 200 mm overall height; 300 ml nominal capacity; a 1 inch (25.4 mm) neck. Typical filling applications are edible oil mousse, culinary foam, whipped oil. Other heights and diameters in the same family can be quoted on request, so the size listed here is a starting point rather than a limit.
This 53 mm diameter aluminium container is produced in-house from aluminium slug to finished printed can. Body forming, shoulder shaping, internal coating, printing and final inspection all run on the same line, so the wall thickness and pressure performance stay consistent from the first sample to the last pallet of a bulk order.
We supply cans only, or a complete package with valve, actuator and cap selected to match your formulation and filling equipment. Free blank samples are available so your laboratory can confirm pressure, spray rate and compatibility before you commit to tooling or a production run.
Specifications
| Material | Aluminium 99.5% (one-piece / monobloc body) |
|---|---|
| Diameter | 53 mm |
| Height | 200 mm |
| Nominal volume / weight | 300 ml |
| Neck / valve size | 1 inch (25.4 mm) |
| Shoulder shape | Round shoulder |
| Recommended contents | Edible oil mousse, culinary foam, whipped oil |
| Internal coating | Food-grade internal lacquer on request |
| Printing | Up to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating |
| Surface finish | High gloss / matte / pearl / metallic lacquer |
| Cap | Plastic cap — colour matched to your artwork |
| Packing | Carton + pallet, or as per customer instruction |
| MOQ | 10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications |
| Lead time | 15–30 days after sample approval |
Final specifications are confirmed against your artwork and filling line before tooling.
Product Features
- Propellant sits in the oil as a dispersed phase rather than dissolving into it, so the can must be shaken; a can left standing discharges gas-rich slugs before the flow settles into liquid.
- Overrun is fixed at filling by the ratio of oil to propellant, not by the actuator. Changing foam texture means changing the fill recipe, not fitting a different nozzle.
- A 53 mm diameter leaves a wider valve cup land than a 45 mm body, which shortens the unsupported dome span around the crimp and keeps the shoulder stable during crimping.
- At 200 mm tall the oil column above the dip tube adds hydrostatic head, so delivery runs slightly heavier on a full can and tapers as the fill drops toward the tube end.
- Oil foam is thermodynamically unstable: gas escapes, lamellae drain, and a film is left behind. On a warm pan that collapse is the useful half of the behaviour, not a defect.
- Food-grade internal lacquer is applied on request across body, dome and base, keeping free fatty acids in the oil away from bare aluminium over a long shelf life.
Application Scenarios
Foaming Butter Blends
Butter and oil blends foam readily when gas expands through the fat; a wide-port foam actuator spreads that structure across a pan instead of laying down a pool.
Bakery Release Foam
Tins and moulds take an even film when the foam lands before the metal is hot; it wets the corners and then collapses into a thin release layer as the tin warms.
Dough Edge Brushing
A foam head holds its shape long enough to be spread with a brush or paddle, which suits dough edges that a drifting mist would only partly reach.
Retail Foam Cans
Brands selling a foam-textured oil use the tall 300 ml body as shelf presence; at 200 mm it stands taller than the flat tins beside it on the same shelf.
Samples & MOQ
Free Blank Samples
Blank cans are supplied free of charge — you only cover the courier cost. Use them to test pressure, spray rate and formulation compatibility.
MOQ 10,000 pcs
Standard MOQ is 10,000 pieces per size and design. Smaller trial quantities can be discussed for a first production run.
Sampling In 3–7 Days
Printed samples typically take 3–7 days. Mass production follows 15–30 days after you approve the pre-production sample.
Customization Options
| Diameter | Standard range 22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm |
|---|---|
| Height | Custom height from 90 mm to 300 mm (subject to diameter) |
| Printing | 1–9 colours offset or silkscreen, plus lacquer and vacuum coating |
| Valve | One-inch continuous / metered / bag-on-valve, matched to your formulation |
| Cap | Standard or custom moulded cap, any colour |
| Samples | Free blank samples for compatibility testing; printed samples charged |
Frequently Asked Questions
The propellant rises out of the oil over time. Without agitation the first seconds of spray are gas-heavy and the rest is liquid-heavy, which shows up as an inconsistent foam on the pan.
Only within narrow limits. Actuator port size shifts bubble scale, but overrun and drain time are set by the oil, the propellant share and the emulsifier used at filling.
Yes, the 1 inch (25.4 mm) crimp. The larger diameter simply gives more shoulder land around the cup, which helps when artwork is printed close to the crimp line.
Food-grade lacquer on request, sprayed to cover dome, wall and base. Buyers normally qualify the lacquer against their own fill before committing to a production run.
You May Also Like
-
300 ml Culinary Oil Aerosol Can for Pan Seasoning and Griddle Release
300 ml · BOV · food-grade coating
-
200 ml Olive Oil Aerosol Can for Finishing and Dressing Oils
200 ml · food-grade coating · cooking spray
-
200 / 300 ml Food-Grade Aluminium Aerosol Can Set for Dual Retail Formats
200 / 300 ml · can + valve + actuator + cap · food-grade