English
300 ml aluminium culinary oil aerosol can with printed body and wide-angle actuator, standing beside a seasoned flat-top griddle in a commercial kitchen

300 ml Culinary Oil Aerosol Can for Pan Seasoning and Griddle Release

A pan needs a film, and the gap between a good pass and a bad one is measured in where droplets land rather than in how much oil leaves the can. Coverage comes from pattern width, working distance and overlap. Residue is simply the area the pattern never touched, which is settled at the actuator and valve long before the oil reaches metal.

  • Place of originChina
  • Diameter range22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
  • PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
  • Port of loadingGuangzhou / Shenzhen / Ningbo / Shanghai
  • MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
  • Payment termsT/T, L/C, PayPal, Western Union — for your selection
  • Trade termEXW / DAP / DDP

Product Description

A pan needs a film, and the gap between a good pass and a bad one is measured in where droplets land rather than in how much oil leaves the can. Coverage comes from pattern width, working distance and overlap. Residue is simply the area the pattern never touched, which is settled at the actuator and valve long before the oil reaches metal.

Key format data: 300 ml nominal capacity. Typical filling applications are cooking oil, vegetable oil, grilling spray. Other heights and diameters in the same family can be quoted on request, so the size listed here is a starting point rather than a limit.

This aluminium container is produced in-house from aluminium slug to finished printed can. Body forming, shoulder shaping, internal coating, printing and final inspection all run on the same line, so the wall thickness and pressure performance stay consistent from the first sample to the last pallet of a bulk order.

We supply cans only, or a complete package with valve, actuator and cap selected to match your formulation and filling equipment. Free blank samples are available so your laboratory can confirm pressure, spray rate and compatibility before you commit to tooling or a production run.

Specifications

MaterialAluminium 99.5% (one-piece / monobloc body)
DiameterRecommended based on your requirements
HeightRecommended based on your requirements
Nominal volume / weight300 ml
Neck / valve sizeRecommended based on your requirements
Shoulder shapeRecommended based on your requirements
Recommended contentsCooking oil, vegetable oil, grilling spray
Internal coatingFood-grade internal lacquer on request
PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
Surface finishHigh gloss / matte / pearl / metallic lacquer
CapPlastic cap — colour matched to your artwork
PackingCarton + pallet, or as per customer instruction
MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
Lead time15–30 days after sample approval

Final specifications are confirmed against your artwork and filling line before tooling.

Product Features

  • The cone widens with distance: held close it lays a wet band, held further out it deposits a thinner and broader film, and one can serves both without a nozzle change.
  • Droplet size decides the outcome. Coarse droplets bead and run to the pan rim, while fine ones drift and settle on the hob instead of the cooking surface.
  • Two crossing passes at right angles cover a round pan more evenly than one circular sweep, which over-wets the centre and starves the outer ring.
  • Internal pressure falls as propellant leaves the can, so the tail of a 300 ml fill sprays coarser and the actuator has to be brought closer to hold the same film.
  • A ring of burnt oil at the pan wall marks a pattern that never reached it; angling the can toward the side rather than straight down puts oil where the food will sit.
  • Thin film overheated on bare carbon steel polymerises into a hard brown ring, so a light complete pass outperforms a heavy one that pools at the lowest point.

Application Scenarios

Griddle & Flat Top

Long plates get seasoned in overlapping bands; the pattern stays wide enough that one operator can walk the can along the surface without stopping to re-aim.

Mould Release

Loaf tins and bun trays release cleanly when the film is thin and complete; a short pass at arm's length beats a heavy spray that collects in the corners.

Retail Cooking Aisles

Consumer packs sold beside bottled oils need a spray that behaves the same on the first and last use, so valve and actuator are matched to the fill volume.

Food Service Cases

High-turnover kitchens buy 300 ml by the case and finish it within weeks; the body takes 9-colour direct print for house-brand programmes.

Samples & MOQ

Free Blank Samples

Blank cans are supplied free of charge — you only cover the courier cost. Use them to test pressure, spray rate and formulation compatibility.

MOQ 10,000 pcs

Standard MOQ is 10,000 pieces per size and design. Smaller trial quantities can be discussed for a first production run.

Sampling In 3–7 Days

Printed samples typically take 3–7 days. Mass production follows 15–30 days after you approve the pre-production sample.

Customization Options

DiameterStandard range 22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
HeightCustom height from 90 mm to 300 mm (subject to diameter)
Printing1–9 colours offset or silkscreen, plus lacquer and vacuum coating
ValveOne-inch continuous / metered / bag-on-valve, matched to your formulation
CapStandard or custom moulded cap, any colour
SamplesFree blank samples for compatibility testing; printed samples charged

Frequently Asked Questions

Pressure drops with the propellant charge. The pattern widens and droplets coarsen near the end of the fill, so operators either shorten the distance or accept a wetter final pass.

Oil left too thin at the wall and then overheated. The ring is polymerised film rather than dirt, and reaching the wall with the pattern is what prevents it.

A wide-angle cone or fan insert matched to the valve stem. Port size is chosen against the viscosity of the oil so the pattern does not collapse into a stream.

10,000 pcs per size and design at standard specification, 20,000 pcs where the print or a can dimension is bespoke. Blank samples ship in 3–7 days.