200 ml Olive Oil Aerosol Can for Finishing and Dressing Oils
Olive oil is the awkward fill in a spray can. It is thicker than seed oils at room temperature, and in a cold store or an unheated warehouse it throws wax crystals that no orifice was sized for. A 200 ml body keeps the fill inside a realistic use window, which matters because the oil itself changes as it ages.
- Place of originChina
- Diameter range22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
- PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
- Port of loadingGuangzhou / Shenzhen / Ningbo / Shanghai
- MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
- Payment termsT/T, L/C, PayPal, Western Union — for your selection
- Trade termEXW / DAP / DDP
Product Description
Olive oil is the awkward fill in a spray can. It is thicker than seed oils at room temperature, and in a cold store or an unheated warehouse it throws wax crystals that no orifice was sized for. A 200 ml body keeps the fill inside a realistic use window, which matters because the oil itself changes as it ages.
Key format data: 200 ml nominal capacity. Typical filling applications are olive oil, extra virgin olive oil, cooking spray. Other heights and diameters in the same family can be quoted on request, so the size listed here is a starting point rather than a limit.
This aluminium container is produced in-house from aluminium slug to finished printed can. Body forming, shoulder shaping, internal coating, printing and final inspection all run on the same line, so the wall thickness and pressure performance stay consistent from the first sample to the last pallet of a bulk order.
We supply cans only, or a complete package with valve, actuator and cap selected to match your formulation and filling equipment. Free blank samples are available so your laboratory can confirm pressure, spray rate and compatibility before you commit to tooling or a production run.
Specifications
| Material | Aluminium 99.5% (one-piece / monobloc body) |
|---|---|
| Diameter | Recommended based on your requirements |
| Height | Recommended based on your requirements |
| Nominal volume / weight | 200 ml |
| Neck / valve size | Recommended based on your requirements |
| Shoulder shape | Recommended based on your requirements |
| Recommended contents | Olive oil, extra virgin olive oil, cooking spray |
| Internal coating | Food-grade internal lacquer on request |
| Printing | Up to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating |
| Surface finish | High gloss / matte / pearl / metallic lacquer |
| Cap | Plastic cap — colour matched to your artwork |
| Packing | Carton + pallet, or as per customer instruction |
| MOQ | 10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications |
| Lead time | 15–30 days after sample approval |
Final specifications are confirmed against your artwork and filling line before tooling.
Product Features
- Viscosity of virgin oil climbs steeply as temperature drops, so a valve sized against a warm sample can starve on a cold morning and spit instead of atomising.
- The wax fraction turns cloudy and then solid below a threshold that varies by origin; those crystals gather at the valve inlet and can hold the stem partly open or shut.
- An aluminium wall is completely opaque, blocking the light that drives photo-oxidation, which spoils a green oil faster than oxygen exposure alone does.
- A 200 ml fill is short enough to be finished inside a normal kitchen cycle, so the oil is not left sitting in a half-empty can for a year of slow decline.
- Headspace oxygen is the other spoilage route; a correct fill height and a tight crimp leave a small gas cushion instead of a large one above the liquid.
- Wide-port actuators pass viscous oil at low pressure, whereas a fine-mist insert tuned for ethanol or water will clog within a few uses on this product.
Application Scenarios
Salad Finishing
A light film over a plated dish at the pass, applied after heat so the volatile aroma compounds survive; the mist coats leaves without pooling in the folds.
Bakery & Focaccia
Tins and proved dough take an even coat from a broad pattern; spraying before the bake keeps the crust from drying without greasing the whole bench.
Speciality Gift Sets
Small formats sell in curated boxes; a 200 ml printed can with a matching cap sits beside vinegar or salt without dominating the set.
Warm-Climate Routes
Where ambient temperature stays high all year the problem inverts, the oil thins and the pattern coarsens, so a smaller port is specified for those markets.
Samples & MOQ
Free Blank Samples
Blank cans are supplied free of charge — you only cover the courier cost. Use them to test pressure, spray rate and formulation compatibility.
MOQ 10,000 pcs
Standard MOQ is 10,000 pieces per size and design. Smaller trial quantities can be discussed for a first production run.
Sampling In 3–7 Days
Printed samples typically take 3–7 days. Mass production follows 15–30 days after you approve the pre-production sample.
Customization Options
| Diameter | Standard range 22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm |
|---|---|
| Height | Custom height from 90 mm to 300 mm (subject to diameter) |
| Printing | 1–9 colours offset or silkscreen, plus lacquer and vacuum coating |
| Valve | One-inch continuous / metered / bag-on-valve, matched to your formulation |
| Cap | Standard or custom moulded cap, any colour |
| Samples | Free blank samples for compatibility testing; printed samples charged |
Frequently Asked Questions
Cold oil thickens and its wax fraction solidifies. Crystals block the inlet, the stem cannot pass the flow, and warming the can restores it. The fill should still be specified for the coldest point on the route.
Yes. An aluminium body lets no ultraviolet through to the fill, which removes one of the two main oxidation routes. The other is oxygen trapped in the headspace at filling.
A larger port than a beverage or ethanol mist would use. The insert is chosen against the customer's own oil at its lowest expected temperature, not against a generic figure.
Food-grade internal lacquer on request. For olive oil it also limits contact between free fatty acids and the aluminium wall, which is the point most buyers raise first.
You May Also Like
-
300 ml Edible Oil Mousse Aerosol Can for Foaming Culinary Oils, Φ53 × 200 mm
D53 × H200 mm · 300 ml · food use
-
300 ml Culinary Oil Aerosol Can for Pan Seasoning and Griddle Release
300 ml · BOV · food-grade coating
-
200 / 300 ml Food-Grade Aluminium Aerosol Can Set for Dual Retail Formats
200 / 300 ml · can + valve + actuator + cap · food-grade