1 Inch (25.4 mm) Crimp Aerosol Valve for Standard Cans
The 1 inch crimp is the interface every other part on this site is measured against. Get cup, gasket and stem right and actuators, caps and closing heads all fall into place; get them wrong and nothing downstream fits.
- Place of originChina
- Neck / valve size1 inch (25.4 mm)
- Port of loadingGuangzhou / Shenzhen / Ningbo / Shanghai
- MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
- Payment termsT/T, L/C, PayPal, Western Union — for your selection
- Trade termEXW / DAP / DDP
Product Description
The 1 inch crimp is the interface every other part on this site is measured against. Get cup, gasket and stem right and actuators, caps and closing heads all fall into place; get them wrong and nothing downstream fits.
Key format data: Standard 1 inch (25.4 mm) crimp diameter and — overall height; — nominal capacity; a 1 inch (25.4 mm) neck. Typical filling applications are assembly components — no filling. Other heights and diameters in the same family can be quoted on request, so the size listed here is a starting point rather than a limit.
This Standard 1 inch (25.4 mm) crimp diameter aluminium container is produced in-house from aluminium slug to finished printed can. Body forming, shoulder shaping, internal coating, printing and final inspection all run on the same line, so the wall thickness and pressure performance stay consistent from the first sample to the last pallet of a bulk order.
We supply cans only, or a complete package with valve, actuator and cap selected to match your formulation and filling equipment. Free blank samples are available so your laboratory can confirm pressure, spray rate and compatibility before you commit to tooling or a production run.
Specifications
| Material | Metal valve cup with moulded plastic stem and gasket |
|---|---|
| Neck / valve size | 1 inch (25.4 mm) |
| Recommended contents | Assembly components — no filling |
| Packing | Carton + pallet, or as per customer instruction |
| MOQ | 10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications |
| Lead time | 15–30 days after sample approval |
Final specifications are confirmed against your artwork and filling line before tooling.
Product Features
- The mounting cup is formed to the standard 1 inch (25.4 mm) crimp, the dimension that sets the closing collet and the can's valve seat.
- Cup, stem and gasket arrive as one assembly, and the gasket is the part that decides whether a solvent or a hydrocarbon propellant is held.
- Continuous, metered and bag-on-valve builds share the same cup, so a filler can change discharge behaviour without changing the closing tool.
- Stem length and bore are fixed at the mould, which is why an actuator is matched to a valve family rather than to a can diameter.
- The dip tube is cut to the body on assembly: too long and it coils on the base, too short and the can draws vapour before it is empty.
- Cups come nested and orientated for vibratory feed, and each batch is pressure-tested at the seam before it leaves the line.
Application Scenarios
Standard Can Filling
Any line running a 1 inch crimp can take this valve without a collet change, which makes it the default starting point for a new can specification.
Actuator Matching
Actuator sockets are quoted against this stem, so a buyer choosing both parts from one source removes the fit risk between them.
Metered Dose Builds
Formats needing a fixed shot per press take the metered build on the same cup, keeping the can and closing head unchanged.
BOV Assembly
Bag-on-valve formats use the same crimp, so a filler can run a pressurised bag line and a conventional line off one closing station.
Samples & MOQ
Free Blank Samples
Blank cans are supplied free of charge — you only cover the courier cost. Use them to test pressure, spray rate and formulation compatibility.
MOQ 10,000 pcs
Standard MOQ is 10,000 pieces per size and design. Smaller trial quantities can be discussed for a first production run.
Sampling In 3–7 Days
Printed samples typically take 3–7 days. Mass production follows 15–30 days after you approve the pre-production sample.
Customization Options
| Cap | Standard or custom moulded cap, any colour |
|---|---|
| Samples | Free blank samples for compatibility testing; printed samples charged |
Frequently Asked Questions
The crimp diameter of the mounting cup across the seam where the closing collet folds the cup onto the can's valve seat. It is not the can diameter.
Only within its stem family. Stem outer diameter and height decide what seats, which is why we ask for the valve drawing before matching an actuator or cap.
By the concentrate and the propellant together. Hydrocarbon blends, compressed gases and solvent-borne formulas load the gasket differently, so both are needed to specify.
Yes, as a set. Orders start at 10,000 pcs per size and design, moving to 20,000 pcs where bespoke specifications or custom printing apply.
You May Also Like
-
-
Aerosol Valve and Diffuser Set for Disposable Car Deodorizers
valve + diffuser · car deodorizer
-
Aerosol Actuator with Colour Ring for Sunscreen Spray Cans
actuator · sunscreen · colour ring