English
Nasal spray actuator with a rounded axial tip and wide finger pad, photographed side-on to show the straight outlet bore

Aerosol Actuator with Narrow Plume Tip for Nasal Spray Cans

Nasal formats are judged on dose repeatability, not on coverage. The tip here produces a narrow plume at low output, so one press delivers a short contained burst that stays where it is aimed instead of coating the whole face.

  • Place of originChina
  • Neck / valve sizeRecommended based on your requirements
  • Port of loadingGuangzhou / Shenzhen / Ningbo / Shanghai
  • MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
  • Payment termsT/T, L/C, PayPal, Western Union — for your selection
  • Trade termEXW / DAP / DDP

Product Description

Nasal formats are judged on dose repeatability, not on coverage. The tip here produces a narrow plume at low output, so one press delivers a short contained burst that stays where it is aimed instead of coating the whole face.

Key format data: — nominal capacity. Typical filling applications are nasal spray, saline spray. Other heights and diameters in the same family can be quoted on request, so the size listed here is a starting point rather than a limit.

This aluminium container is produced in-house from aluminium slug to finished printed can. Body forming, shoulder shaping, internal coating, printing and final inspection all run on the same line, so the wall thickness and pressure performance stay consistent from the first sample to the last pallet of a bulk order.

We supply cans only, or a complete package with valve, actuator and cap selected to match your formulation and filling equipment. Free blank samples are available so your laboratory can confirm pressure, spray rate and compatibility before you commit to tooling or a production run.

Specifications

MaterialMoulded plastic
Neck / valve sizeRecommended based on your requirements
Recommended contentsNasal spray, saline spray
PackingCarton + pallet, or as per customer instruction
MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
Lead time15–30 days after sample approval

Final specifications are confirmed against your artwork and filling line before tooling.

Product Features

  • The plume is axial because the outlet is a short straight bore rather than a swirl chamber, so product leaves as a column instead of a widening cone.
  • Output per press is held low by the metering valve, and the actuator adds almost no dead volume between the stem and the tip.
  • The tip profile is rounded and polished at the orifice, so it can be brought close to the nostril without a sharp edge or a burr catching skin.
  • A wide flat finger pad gives a consistent press point for users who cannot judge force by feel, which is most of them on a first use.
  • Parts are washed and packed in sealed liners, since a nasal tip cannot be cleaned once it has left the filling line and entered a pocket.
  • The shroud seats on the valve cup with a locating rib, so the tip cannot rotate off-axis during capping or while carried loose in a bag.

Application Scenarios

Saline Nasal Mist

Saline formats need a soft, short burst because the user presses while the can is already tilted, and an axial plume lands where the tip points.

Metered Dose Filling

Lines running metering valves need an actuator whose dead volume is small enough that the first press after filling is close to the steady dose.

Pharmacy Own Label

Chains listing a store-brand nasal line specify a neutral tip with no brand moulding, so the same part serves several labels from one cavity set.

Travel and Kit Packs

Cans packed into cold-and-flu kits sit loose against carton walls, and a low-profile shroud resists the levering that snaps taller tips off.

Samples & MOQ

Free Blank Samples

Blank cans are supplied free of charge — you only cover the courier cost. Use them to test pressure, spray rate and formulation compatibility.

MOQ 10,000 pcs

Standard MOQ is 10,000 pieces per size and design. Smaller trial quantities can be discussed for a first production run.

Sampling In 3–7 Days

Printed samples typically take 3–7 days. Mass production follows 15–30 days after you approve the pre-production sample.

Customization Options

CapStandard or custom moulded cap, any colour
SamplesFree blank samples for compatibility testing; printed samples charged

Frequently Asked Questions

Output is set by the metering valve, not the actuator. The actuator's job is to deliver the valve's dose without adding volume or turbulence, so we match the two together.

Yes. A push-on cap that clears the tip without touching the orifice is quoted with the actuator, and the pair is trialled on the capping head before the run.

None. The part is supplied as an aerosol component, and the claims a brand makes for its own formulation are its own responsibility in each market.

Double-bagged in sealed liners and cartoned, at 10,000 pcs minimum per design, with 20,000 pcs where a bespoke tip profile is needed.