English
Sunscreen spray actuator with a coloured identification ring under the shroud, shown at an angle to reveal the flat-fan outlet

Aerosol Actuator with Colour Ring for Sunscreen Spray Cans

Emulsion sun care is thicker than a fragrance and far less forgiving at the nozzle. This actuator carries a wider bore and a flat-fan insert, so a high-viscosity spray leaves the can as an even sheet rather than a rope of concentrate.

  • Place of originChina
  • Neck / valve sizeRecommended based on your requirements
  • Port of loadingGuangzhou / Shenzhen / Ningbo / Shanghai
  • MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
  • Payment termsT/T, L/C, PayPal, Western Union — for your selection
  • Trade termEXW / DAP / DDP

Product Description

Emulsion sun care is thicker than a fragrance and far less forgiving at the nozzle. This actuator carries a wider bore and a flat-fan insert, so a high-viscosity spray leaves the can as an even sheet rather than a rope of concentrate.

Key format data: — nominal capacity. Typical filling applications are sunscreen, cosmetic mist. Other heights and diameters in the same family can be quoted on request, so the size listed here is a starting point rather than a limit.

This aluminium container is produced in-house from aluminium slug to finished printed can. Body forming, shoulder shaping, internal coating, printing and final inspection all run on the same line, so the wall thickness and pressure performance stay consistent from the first sample to the last pallet of a bulk order.

We supply cans only, or a complete package with valve, actuator and cap selected to match your formulation and filling equipment. Free blank samples are available so your laboratory can confirm pressure, spray rate and compatibility before you commit to tooling or a production run.

Specifications

MaterialMoulded plastic
Neck / valve sizeRecommended based on your requirements
Recommended contentsSunscreen, cosmetic mist
PackingCarton + pallet, or as per customer instruction
MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
Lead time15–30 days after sample approval

Final specifications are confirmed against your artwork and filling line before tooling.

Product Features

  • Bore and insert are sized for emulsions and oil-in-water blends, where a fragrance actuator's narrow orifice stalls and spits instead of atomising the product.
  • The flat fan overlaps itself at normal hand distance, so one pass down a forearm deposits an even film instead of a striped pattern that needs a second coat.
  • A colour ring sits under the shroud and clips on after assembly, letting one moulded body carry several SPF or fragrance variants on the same shelf.
  • Ring recesses are shallow and deburred, because a proud ring catches on the overcap and shaves plastic into the outlet during high-speed closure.
  • The outlet is set back from the shroud face, keeping a wet nozzle away from skin and fabric between passes on a beach or poolside.
  • Moulded in a grade that tolerates the esters and silicones used in sun care, so the shroud does not stress-crack after repeated wet and dry cycles.

Application Scenarios

Body Sun Care

Full-body formats need enough output to cover a back in a few seconds, and a flat fan lays a film faster than a cone of the same flow.

SPF Variant Coding

Retailers merchandise a ladder of protection factors from one can body; the colour ring identifies the variant without a separate print run.

Kids and Family Cans

Family formats are pressed at arm's length by a moving target, so a fan that stays coherent across distance matters more than a fine droplet size.

Contract Sun Care Runs

Fillers running several brands on one line keep a single actuator body and swap rings at the capping head, avoiding a full changeover.

Samples & MOQ

Free Blank Samples

Blank cans are supplied free of charge — you only cover the courier cost. Use them to test pressure, spray rate and formulation compatibility.

MOQ 10,000 pcs

Standard MOQ is 10,000 pieces per size and design. Smaller trial quantities can be discussed for a first production run.

Sampling In 3–7 Days

Printed samples typically take 3–7 days. Mass production follows 15–30 days after you approve the pre-production sample.

Customization Options

CapStandard or custom moulded cap, any colour
SamplesFree blank samples for compatibility testing; printed samples charged

Frequently Asked Questions

The bore is opened for emulsion viscosity and the insert is a straight slot rather than a swirl chamber, which is where stringy product normally bridges and blocks.

Rings are moulded in colour, and a custom shade moves the order to the bespoke tier at 20,000 pcs. Standard shades run at 10,000 pcs per design.

No, the ring sits inside the shroud profile and the cap locates on the shroud shoulder, so the same overcap works with or without a ring fitted.

Fan width holds until the last part of the fill, then widens slightly as pressure drops. That is normal for a compressed-gas system and needs no adjustment at the nozzle.