Aerosol Actuator with Wide Fan Pattern for Air Freshener Cans
Room fragrance lines are decided at the nozzle, not in the fragrance house. This actuator opens a wide, low-velocity fan so a single press covers a doorway instead of soaking the wall beside it, and the collar seats on a standard valve stem without an adapter.
- Place of originChina
- Neck / valve sizeRecommended based on your requirements
- Port of loadingGuangzhou / Shenzhen / Ningbo / Shanghai
- MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
- Payment termsT/T, L/C, PayPal, Western Union — for your selection
- Trade termEXW / DAP / DDP
Product Description
Room fragrance lines are decided at the nozzle, not in the fragrance house. This actuator opens a wide, low-velocity fan so a single press covers a doorway instead of soaking the wall beside it, and the collar seats on a standard valve stem without an adapter.
Key format data: — nominal capacity. Typical filling applications are air freshener, room spray. Other heights and diameters in the same family can be quoted on request, so the size listed here is a starting point rather than a limit.
This aluminium container is produced in-house from aluminium slug to finished printed can. Body forming, shoulder shaping, internal coating, printing and final inspection all run on the same line, so the wall thickness and pressure performance stay consistent from the first sample to the last pallet of a bulk order.
We supply cans only, or a complete package with valve, actuator and cap selected to match your formulation and filling equipment. Free blank samples are available so your laboratory can confirm pressure, spray rate and compatibility before you commit to tooling or a production run.
Specifications
| Material | Moulded plastic |
|---|---|
| Neck / valve size | Recommended based on your requirements |
| Recommended contents | Air freshener, room spray |
| Packing | Carton + pallet, or as per customer instruction |
| MOQ | 10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications |
| Lead time | 15–30 days after sample approval |
Final specifications are confirmed against your artwork and filling line before tooling.
Product Features
- Fan angle is set by the insert moulded into the outlet rather than by stem pressure, so room coverage stays constant whether the can is full or nearly empty.
- Exit velocity is kept low so droplets stay airborne long enough to cross a lobby; heavier droplets drop inside the first metre and leave marks on flooring.
- Press force sits in the band timer-driven dispensers expect, letting a solenoid lever bottom the stem without stalling or double-firing on release.
- The skirt clears the valve cup rim by a working gap, which stops the actuator binding when a crimp sits a fraction high on the can.
- Solvent-grade plastic resists the alcohol and glycol carriers used in fragrance concentrates, where untreated styrenic parts craze and split at the stem socket.
- Parts arrive degated in bulk cartons for hopper feeding, with no secondary trimming needed before the filling head picks and presses them.
Application Scenarios
Hotel Corridor Units
Corridors and lift lobbies need coverage per stroke rather than a wet stripe on one wall, so the wide fan is paired with ceiling-height timed dispensers running on a short cycle.
Washroom Dispensers
Washroom timers release a brief burst every few minutes; a low-velocity fan spreads that small volume across a bank of cubicles instead of pooling on the floor.
Retail Tester Cans
Sample cans on a fragrance counter are pressed dozens of times an hour, so the part is cycled far beyond a domestic pattern and still returns cleanly to rest.
Household Refill Ranges
Refills for plug-in and manual room sprays share the same stem interface, letting one actuator reference run across a whole family of fragrance variants.
Samples & MOQ
Free Blank Samples
Blank cans are supplied free of charge — you only cover the courier cost. Use them to test pressure, spray rate and formulation compatibility.
MOQ 10,000 pcs
Standard MOQ is 10,000 pieces per size and design. Smaller trial quantities can be discussed for a first production run.
Sampling In 3–7 Days
Printed samples typically take 3–7 days. Mass production follows 15–30 days after you approve the pre-production sample.
Customization Options
| Cap | Standard or custom moulded cap, any colour |
|---|---|
| Samples | Free blank samples for compatibility testing; printed samples charged |
Frequently Asked Questions
Send a stem sample or a valve drawing with the stem height and outer diameter marked. We check the socket against it before tooling, and blank samples are free at that stage.
In degree, not in kind. A higher-pressure blend carries the same cone further before it breaks up, while a low-pressure blend needs the can held closer to the target.
Yes, provided the lever arm reaches the pad without pre-loading the stem. Check the dispenser travel against actuator height when the timer is first set.
10,000 pcs per size and design as standard, rising to 20,000 pcs where a custom colour or a printed shroud is specified. Samples ship in 3-7 days.
You May Also Like
-
Aerosol Valve and Diffuser Set for Disposable Car Deodorizers
valve + diffuser · car deodorizer
-
Aerosol Actuator with Colour Ring for Sunscreen Spray Cans
actuator · sunscreen · colour ring
-