Aerosol Valve and Diffuser Set for Disposable Car Deodorizers
A cabin is a small closed volume, and a full-flow valve can empty half a can into the seats in one press. This matched valve and diffuser pair releases a short, slow puff that spreads through the interior instead of striking the trim.
- Place of originChina
- Neck / valve sizeRecommended based on your requirements
- Port of loadingGuangzhou / Shenzhen / Ningbo / Shanghai
- MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
- Payment termsT/T, L/C, PayPal, Western Union — for your selection
- Trade termEXW / DAP / DDP
Product Description
A cabin is a small closed volume, and a full-flow valve can empty half a can into the seats in one press. This matched valve and diffuser pair releases a short, slow puff that spreads through the interior instead of striking the trim.
Key format data: — nominal capacity. Typical filling applications are car deodorizer, car air freshener. Other heights and diameters in the same family can be quoted on request, so the size listed here is a starting point rather than a limit.
This aluminium container is produced in-house from aluminium slug to finished printed can. Body forming, shoulder shaping, internal coating, printing and final inspection all run on the same line, so the wall thickness and pressure performance stay consistent from the first sample to the last pallet of a bulk order.
We supply cans only, or a complete package with valve, actuator and cap selected to match your formulation and filling equipment. Free blank samples are available so your laboratory can confirm pressure, spray rate and compatibility before you commit to tooling or a production run.
Specifications
| Material | Metal valve cup with moulded plastic stem and gasket |
|---|---|
| Neck / valve size | Recommended based on your requirements |
| Recommended contents | Car deodorizer, car air freshener |
| Packing | Carton + pallet, or as per customer instruction |
| MOQ | 10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications |
| Lead time | 15–30 days after sample approval |
Final specifications are confirmed against your artwork and filling line before tooling.
Product Features
- Valve and diffuser ship as a tested pair, with the diffuser inlet sized to the valve delivery, so substituting one half alone changes the dose the user gets.
- Delivery is deliberately slow; the diffuser breaks the stream into a soft cone that has lost most of its velocity within a few centimetres of the outlet.
- Stem and gasket are moulded in a grade chosen for fragrance solvents, since terpenes and alcohol swell general-purpose elastomers across a shelf life.
- The dip tube can be trimmed to the body length so the unit keeps drawing vapour rather than liquid when the can sits tilted in a dashboard holder.
- Crimp depth is controlled at the cup, and the cup skirt is deep enough for a standard closing collet to fold without pinching the gasket.
- Cup seams are pressure-tested batch by batch before packing, which is where a gasket that is wrong for the concentrate shows up first as a slow leak.
Application Scenarios
Disposable Cabin Units
One-piece deodorizers sold at fuel stations rely on a dose small enough to leave no film on glass, which is why the diffuser caps the valve output.
Taxi and Fleet Supply
High-turnover fleets replace units weekly and judge them by evenness, so a diffuser that spreads rather than jets keeps complaints about stained upholstery down.
Clip-On Vent Housings
Vent-mounted bodies hold the can at an angle for months, and a short dip tube keeps the stem drawing vapour so the outlet does not flood.
Promotional Samplings
Branded giveaways at car washes need a low unit cost with a controlled first press, since the user has no instructions and will press twice.
Samples & MOQ
Free Blank Samples
Blank cans are supplied free of charge — you only cover the courier cost. Use them to test pressure, spray rate and formulation compatibility.
MOQ 10,000 pcs
Standard MOQ is 10,000 pieces per size and design. Smaller trial quantities can be discussed for a first production run.
Sampling In 3–7 Days
Printed samples typically take 3–7 days. Mass production follows 15–30 days after you approve the pre-production sample.
Customization Options
| Cap | Standard or custom moulded cap, any colour |
|---|---|
| Samples | Free blank samples for compatibility testing; printed samples charged |
Frequently Asked Questions
Yes, but the pair is matched. Running the valve on its own increases output per press and changes the plume, so we quote them together unless a drawing specifies otherwise.
Tell us the solvent system and the propellant. The gasket grade follows the concentrate, and a mismatch usually appears as seepage at the cup after a few weeks.
The diffuser inlet is a moulded orifice, not a drilled one, so every cavity produces the same restriction and the dose does not drift with tool wear.
From 10,000 pcs per size and design, or 20,000 pcs where bespoke specifications apply. Tooling is confirmed against blank samples first.
You May Also Like
-
-
Aerosol Actuator with Colour Ring for Sunscreen Spray Cans
actuator · sunscreen · colour ring
-