English
Petal-cut mousse nozzle with its push-on cap removed, showing the radial slots of the foam outlet and the shoulder locating rib

Mousse Nozzle with Petal-Cut Outlet and Cap for Cream Mousse

The shape of a foam ribbon is decided at the outlet, not inside the can. A petal-cut nozzle divides expanding foam into lobes as it leaves, producing a soft segmented bead that holds its form long enough to be spread by hand.

  • Place of originChina
  • Neck / valve sizeRecommended based on your requirements
  • Port of loadingGuangzhou / Shenzhen / Ningbo / Shanghai
  • MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
  • Payment termsT/T, L/C, PayPal, Western Union — for your selection
  • Trade termEXW / DAP / DDP

Product Description

The shape of a foam ribbon is decided at the outlet, not inside the can. A petal-cut nozzle divides expanding foam into lobes as it leaves, producing a soft segmented bead that holds its form long enough to be spread by hand.

Key format data: — nominal capacity. Typical filling applications are cream mousse, whipped foam. Other heights and diameters in the same family can be quoted on request, so the size listed here is a starting point rather than a limit.

This aluminium container is produced in-house from aluminium slug to finished printed can. Body forming, shoulder shaping, internal coating, printing and final inspection all run on the same line, so the wall thickness and pressure performance stay consistent from the first sample to the last pallet of a bulk order.

We supply cans only, or a complete package with valve, actuator and cap selected to match your formulation and filling equipment. Free blank samples are available so your laboratory can confirm pressure, spray rate and compatibility before you commit to tooling or a production run.

Specifications

MaterialMoulded plastic
Neck / valve sizeRecommended based on your requirements
Recommended contentsCream mousse, whipped foam
PackingCarton + pallet, or as per customer instruction
MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
Lead time15–30 days after sample approval

Final specifications are confirmed against your artwork and filling line before tooling.

Product Features

  • The petal cut is a ring of radial slots around the outlet; foam expands through each slot and merges into a lobed ribbon a few millimetres past the face.
  • Slot count and depth fix ribbon width, so moving from a four-lobe to a six-lobe face is a mould change rather than a formula change.
  • An internal expansion chamber gives propellant room to flash off before the foam reaches the cut, which stops the lobes collapsing into a lump.
  • The push-on cap locates on the nozzle shoulder by friction rib and covers the outlet, so a can set down on a wet shelf does not smear foam.
  • Cap and nozzle come from the same tool family, holding the fit tight enough that the cap does not walk off inside a shipping carton.
  • Both parts ship assembled or loose to suit the filling head, and the nozzle presses onto the valve stem by hand or by a simple press stroke.

Application Scenarios

Cream Cleansing Foam

Facial cleansing foam is spread over the whole face, so a lobed ribbon breaks into portions in the hand instead of one unmanageable mass.

Hair Foam Cans

Styling foam needs a bead that sits on the palm without running between the fingers, which is what the segmented outlet produces.

Shaving Foam

Shaving formats are used with wet hands at a sink, and a cap that pulls off in one motion beats a threaded closure every morning.

Sample Mousse Units

Small trial cans shown in a counter unit need the foam shape visible after the cap comes off, since the texture is the product's main claim.

Samples & MOQ

Free Blank Samples

Blank cans are supplied free of charge — you only cover the courier cost. Use them to test pressure, spray rate and formulation compatibility.

MOQ 10,000 pcs

Standard MOQ is 10,000 pieces per size and design. Smaller trial quantities can be discussed for a first production run.

Sampling In 3–7 Days

Printed samples typically take 3–7 days. Mass production follows 15–30 days after you approve the pre-production sample.

Customization Options

CapStandard or custom moulded cap, any colour
SamplesFree blank samples for compatibility testing; printed samples charged

Frequently Asked Questions

It changes how the foam is presented, not how stiff it is. Stiffness comes from the concentrate and valve, while the cut sets ribbon width and how quickly the foam opens.

It presses onto the standard stem used in the foam valve family we supply. Send a stem drawing and we will confirm the socket bore before moulds are cut.

Either way. Most fillers take them assembled for a single pick at the head, but loose supply suits lines that cap after a labelling step.

10,000 pcs per size and design, and 20,000 pcs if a custom colour or a branded cap top is required. Blank samples are free before tooling.