English
Clear cylindrical overcap fitted over a petal-cut mousse nozzle, lit to show the nozzle face through the transparent barrel

Petal-Cut Mousse Nozzle with Clear Cylindrical Overcap

Brands that mould a colour-matched nozzle want it visible on the shelf, and a clear sleeve is the plainest way to show it while still covering the outlet. This overcap is an uncoloured cylinder, so the foam face reads straight through.

  • Place of originChina
  • Neck / valve sizeRecommended based on your requirements
  • Port of loadingGuangzhou / Shenzhen / Ningbo / Shanghai
  • MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
  • Payment termsT/T, L/C, PayPal, Western Union — for your selection
  • Trade termEXW / DAP / DDP

Product Description

Brands that mould a colour-matched nozzle want it visible on the shelf, and a clear sleeve is the plainest way to show it while still covering the outlet. This overcap is an uncoloured cylinder, so the foam face reads straight through.

Key format data: — nominal capacity. Typical filling applications are cream mousse, whipped foam. Other heights and diameters in the same family can be quoted on request, so the size listed here is a starting point rather than a limit.

This aluminium container is produced in-house from aluminium slug to finished printed can. Body forming, shoulder shaping, internal coating, printing and final inspection all run on the same line, so the wall thickness and pressure performance stay consistent from the first sample to the last pallet of a bulk order.

We supply cans only, or a complete package with valve, actuator and cap selected to match your formulation and filling equipment. Free blank samples are available so your laboratory can confirm pressure, spray rate and compatibility before you commit to tooling or a production run.

Specifications

MaterialMoulded plastic
Neck / valve sizeRecommended based on your requirements
Recommended contentsCream mousse, whipped foam
PackingCarton + pallet, or as per customer instruction
MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
Lead time15–30 days after sample approval

Final specifications are confirmed against your artwork and filling line before tooling.

Product Features

  • The barrel is moulded without pigment, and the polish on the core decides whether the nozzle behind it reads sharply or blurs into a smear.
  • It is a friction fit over the nozzle shroud rather than a screw closure, so one pull removes it, which suits a wet-handed user in a shower.
  • Venting at the closed end releases the pressure that builds when a warm can is capped straight off the line and would otherwise push the cap off.
  • Wall thickness is held constant round the barrel so the cap neither distorts the view of the nozzle nor shows sink marks opposite the gate.
  • The open end is chamfered to guide the cap onto the shroud at closing speed, where a square edge would catch and split the skirt.
  • Moulded in a clear grade that resists the alcohol in foam formulas, because stress crazing is far more visible on an unpigmented part.

Application Scenarios

Shelf Presence Packs

A tinted nozzle is part of the brand design, and a clear overcap lets a shopper see it without the brand paying for a printed carton.

Shower and Bath Foam

Bathroom formats are stored cap-down in a wet caddy, so a smooth cylindrical sleeve sheds water and does not trap it against the nozzle.

Colour-Coded Foam Lines

A range sold by scent uses differently coloured nozzles under one clear cap, letting a retailer read the variant without opening the can.

Gift and Set Packs

Sets packed in a windowed box rely on the clear cap staying scratch-free through handling, so the barrel is packed in a protective tray.

Samples & MOQ

Free Blank Samples

Blank cans are supplied free of charge — you only cover the courier cost. Use them to test pressure, spray rate and formulation compatibility.

MOQ 10,000 pcs

Standard MOQ is 10,000 pieces per size and design. Smaller trial quantities can be discussed for a first production run.

Sampling In 3–7 Days

Printed samples typically take 3–7 days. Mass production follows 15–30 days after you approve the pre-production sample.

Customization Options

CapStandard or custom moulded cap, any colour
SamplesFree blank samples for compatibility testing; printed samples charged

Frequently Asked Questions

The grade is selected for clarity retention under retail lighting. Storage in direct sun for long periods is the usual cause of tint shift on any clear moulding.

It does not, and it should not. The vent at the closed end keeps the cap from being pressurised by residual foam, and the valve below does the sealing.

If the shroud diameter and height match the cap's fit band, yes. Send the nozzle drawing and we will check the interference before quoting.

Caps are nested in cartons for bowl feeding, at 10,000 pcs per design, or 20,000 pcs where a bespoke barrel height is required.