English
High-flow industrial coating actuator with a wide flat-fan outlet and short shroud, shown beside a coated metal test panel

High-Flow Actuator for Industrial Coating Aerosol Cans

Paint, lubricant and release agent all leave the can thicker than a cosmetic, and a fine-mist actuator will bridge at the outlet on the first pass. This part opens a large orifice and a flat fan, trading droplet size for volume.

  • Place of originChina
  • Neck / valve sizeRecommended based on your requirements
  • Port of loadingGuangzhou / Shenzhen / Ningbo / Shanghai
  • MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
  • Payment termsT/T, L/C, PayPal, Western Union — for your selection
  • Trade termEXW / DAP / DDP

Product Description

Paint, lubricant and release agent all leave the can thicker than a cosmetic, and a fine-mist actuator will bridge at the outlet on the first pass. This part opens a large orifice and a flat fan, trading droplet size for volume.

Key format data: — nominal capacity. Typical filling applications are industrial coating, paint, release agent. Other heights and diameters in the same family can be quoted on request, so the size listed here is a starting point rather than a limit.

This aluminium container is produced in-house from aluminium slug to finished printed can. Body forming, shoulder shaping, internal coating, printing and final inspection all run on the same line, so the wall thickness and pressure performance stay consistent from the first sample to the last pallet of a bulk order.

We supply cans only, or a complete package with valve, actuator and cap selected to match your formulation and filling equipment. Free blank samples are available so your laboratory can confirm pressure, spray rate and compatibility before you commit to tooling or a production run.

Specifications

MaterialMoulded plastic
Neck / valve sizeRecommended based on your requirements
Recommended contentsIndustrial coating, paint, release agent
PackingCarton + pallet, or as per customer instruction
MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
Lead time15–30 days after sample approval

Final specifications are confirmed against your artwork and filling line before tooling.

Product Features

  • Orifice area is the largest in the actuator line, sized so a pigmented coating passes through without bridging across the outlet between strokes.
  • Output per second is high by design: the aim is a wet film laid on a panel in one pass, not a cloud of fine droplets hanging in the air.
  • The fan is flat and wide, giving an overlap band at working distance so a second pass blends into the first without a dry edge between them.
  • Moulded in a solvent-resistant grade, because ketones and aromatic thinners soften general-purpose plastics and swell the stem socket.
  • A coarse screen sits behind the outlet to catch agglomerated pigment, which is the usual cause of a pattern that spits instead of fanning.
  • The shroud is short so the outlet can be brought close to a surface at a low angle, where a long cosmetic shroud would drag through the wet film.

Application Scenarios

Panel and Metal Coating

Touch-up and small-area coating needs film build rather than atomisation, and a high-output fan covers a panel edge in a single stroke.

Release Agents

Mould release is sprayed at a distance onto hot tooling, so a pattern that stays coherent across the gap matters more than droplet fineness.

Lubricant and Penetrant

Penetrating oils are thin but applied in volume, and a wide fan puts product along a seam instead of in one pooled spot.

Marking and Layout

Site marking paints are heavily pigmented, and an outlet wide enough to pass pigment keeps the line from stopping to clear a blocked tip.

Samples & MOQ

Free Blank Samples

Blank cans are supplied free of charge — you only cover the courier cost. Use them to test pressure, spray rate and formulation compatibility.

MOQ 10,000 pcs

Standard MOQ is 10,000 pieces per size and design. Smaller trial quantities can be discussed for a first production run.

Sampling In 3–7 Days

Printed samples typically take 3–7 days. Mass production follows 15–30 days after you approve the pre-production sample.

Customization Options

CapStandard or custom moulded cap, any colour
SamplesFree blank samples for compatibility testing; printed samples charged

Frequently Asked Questions

The actuator does not decide that; the valve does. For inverted work we quote a valve built for inverted discharge and match the actuator to it.

The screen behind the outlet catches agglomerates, and the bore is large enough that normal pigment loading passes. Shake the can as the coating's own instructions require.

Ketones, aromatic thinners and chlorinated solvents are the aggressive group. Tell us the thinner system and we will confirm the grade before quoting.

10,000 pcs per size and design as a floor, commonly in repeat lots through 20,000 pcs tiers where custom colour is specified.