English
400 ml aluminium mini fire extinguisher can with a trigger valve, standing on a workshop bench beside a folded work glove.

400 ml Aluminium Aerosol Can for a Mini Fire Extinguisher in Vehicle Cabins

A compact unit is bought for the gap between an incident starting and a trained response arriving, and the shell has to behave when the cabin is warm and the user is not calm. The 400 ml body with a trigger option is the format most often specified for cab and door-pocket placement. Sold as an auxiliary discharge device, not as a regulated fire extinguisher; local market rules apply.

  • Place of originChina
  • Diameter range22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
  • PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
  • Port of loadingGuangzhou / Shenzhen / Ningbo / Shanghai
  • MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
  • Payment termsT/T, L/C, PayPal, Western Union — for your selection
  • Trade termEXW / DAP / DDP

Product Description

A compact unit is bought for the gap between an incident starting and a trained response arriving, and the shell has to behave when the cabin is warm and the user is not calm. The 400 ml body with a trigger option is the format most often specified for cab and door-pocket placement. Sold as an auxiliary discharge device, not as a regulated fire extinguisher; local market rules apply.

Key format data: 400 ml nominal capacity. Typical filling applications are fire extinguishing agent, fire suppression spray. Other heights and diameters in the same family can be quoted on request, so the size listed here is a starting point rather than a limit.

This aluminium container is produced in-house from aluminium slug to finished printed can. Body forming, shoulder shaping, internal coating, printing and final inspection all run on the same line, so the wall thickness and pressure performance stay consistent from the first sample to the last pallet of a bulk order.

We supply cans only, or a complete package with valve, actuator and cap selected to match your formulation and filling equipment. Free blank samples are available so your laboratory can confirm pressure, spray rate and compatibility before you commit to tooling or a production run.

Specifications

MaterialAluminium 99.5% (one-piece / monobloc body)
DiameterRecommended based on your requirements
HeightRecommended based on your requirements
Nominal volume / weight400 ml
Neck / valve sizeRecommended based on your requirements
Shoulder shapeRecommended based on your requirements
Recommended contentsFire extinguishing agent, fire suppression spray
Internal coatingFood-grade internal lacquer on request
PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
Surface finishHigh gloss / matte / pearl / metallic lacquer
CapPlastic cap — colour matched to your artwork
PackingCarton + pallet, or as per customer instruction
MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
Lead time15–30 days after sample approval

Final specifications are confirmed against your artwork and filling line before tooling.

Product Features

  • The 400 ml body is drawn from a single aluminium slug at 99.5% purity, so dome and base knuckle carry the internal load with no seam left to inspect.
  • A trigger valve gives a whole-hand squeeze that works with a glove on, and it closes when the grip relaxes instead of staying latched open.
  • Crimp geometry at the 1-inch (25.4 mm) cup is gauged at the filling head, because a cup set off centre is the usual cause of a weak, uneven discharge.
  • Dip tube length is set per body height so the pick-up stays under the liquid line when the can is tilted toward a footwell or a seat edge.
  • The wall takes 9-colour direct printing, which lets operating steps sit on the body itself rather than on a label that lifts in a warm cabin.
  • Sampled units from every run are pressure and burst tested in-house; the test is destructive, so a result describes the batch rather than the individual can.

Application Scenarios

Car and van cabins

A cabin unit wants to be reachable from the driver seat without unbuckling. Door pocket or seat-back pouch, cap on, nothing piled in front of it.

Camper and caravan use

Caravans add cooking and wiring inside a small volume. One unit by the habitation door and one near the galley is the layout owners ask for.

Workshop benches

A bench unit sits where grinding and wiring happen. Mount it clear of the vice so sparks and offcuts do not collect around the cap and valve.

Taxi and ride-hail fleets

Fleets want one part number across models. A 400 ml body with printed fleet wording keeps the fitment identical from saloon car to van.

Samples & MOQ

Free Blank Samples

Blank cans are supplied free of charge — you only cover the courier cost. Use them to test pressure, spray rate and formulation compatibility.

MOQ 10,000 pcs

Standard MOQ is 10,000 pieces per size and design. Smaller trial quantities can be discussed for a first production run.

Sampling In 3–7 Days

Printed samples typically take 3–7 days. Mass production follows 15–30 days after you approve the pre-production sample.

Customization Options

DiameterStandard range 22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
HeightCustom height from 90 mm to 300 mm (subject to diameter)
Printing1–9 colours offset or silkscreen, plus lacquer and vacuum coating
ValveOne-inch continuous / metered / bag-on-valve, matched to your formulation
CapStandard or custom moulded cap, any colour
SamplesFree blank samples for compatibility testing; printed samples charged

Frequently Asked Questions

It moves the effort from a fingertip press to a whole-hand squeeze and returns to closed when the hand opens. For a unit used in gloves, that is usually the deciding detail.

We do not quote a storage envelope, because conditions and local rules differ. Keep it upright, out of direct sun, cap fitted, and check the rules that apply where the vehicle is registered.

No. It ships as an auxiliary discharge device and is not a regulated fire extinguisher. Cover required for a vehicle or a premises is set locally and stays with the buyer.

10,000 pcs covers a standard size and design. Add custom printing or a bespoke specification and the figure becomes 20,000 pcs.