English
500 ml printed aluminium fire extinguisher spray can on a shop counter, overcap fitted, instruction panel facing forward.

500 ml Aluminium Aerosol Can for Household and Shop Fire Extinguisher Spray

Shopkeepers and landlords usually want one format that can sit by a till, a kitchen door and a stockroom without looking like plant equipment. The 500 ml body balances that: large enough to read as deliberate kit, small enough to keep close at hand. Sold as an auxiliary discharge device, not as a regulated fire extinguisher; local market rules apply.

  • Place of originChina
  • Diameter range22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
  • PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
  • Port of loadingGuangzhou / Shenzhen / Ningbo / Shanghai
  • MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
  • Payment termsT/T, L/C, PayPal, Western Union — for your selection
  • Trade termEXW / DAP / DDP

Product Description

Shopkeepers and landlords usually want one format that can sit by a till, a kitchen door and a stockroom without looking like plant equipment. The 500 ml body balances that: large enough to read as deliberate kit, small enough to keep close at hand. Sold as an auxiliary discharge device, not as a regulated fire extinguisher; local market rules apply.

Key format data: 500 ml nominal capacity. Typical filling applications are fire extinguishing agent, fire suppression spray. Other heights and diameters in the same family can be quoted on request, so the size listed here is a starting point rather than a limit.

This aluminium container is produced in-house from aluminium slug to finished printed can. Body forming, shoulder shaping, internal coating, printing and final inspection all run on the same line, so the wall thickness and pressure performance stay consistent from the first sample to the last pallet of a bulk order.

We supply cans only, or a complete package with valve, actuator and cap selected to match your formulation and filling equipment. Free blank samples are available so your laboratory can confirm pressure, spray rate and compatibility before you commit to tooling or a production run.

Specifications

MaterialAluminium 99.5% (one-piece / monobloc body)
DiameterRecommended based on your requirements
HeightRecommended based on your requirements
Nominal volume / weight500 ml
Neck / valve sizeRecommended based on your requirements
Shoulder shapeRecommended based on your requirements
Recommended contentsFire extinguishing agent, fire suppression spray
Internal coatingFood-grade internal lacquer on request
PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
Surface finishHigh gloss / matte / pearl / metallic lacquer
CapPlastic cap — colour matched to your artwork
PackingCarton + pallet, or as per customer instruction
MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
Lead time15–30 days after sample approval

Final specifications are confirmed against your artwork and filling line before tooling.

Product Features

  • A one-piece aluminium shell in 99.5% stock keeps the 500 ml wall continuous, so the printed panel stays flat from base to shoulder.
  • The valve sits on a machined neck face, which means the gasket compresses against bare metal and the joint does not rely on internal lacquer to seal.
  • Spray head geometry is fixed at sampling: a narrow cone for aiming into a gap, or a wider fan for sweeping a surface from a step away.
  • An overcap with a raised centre stands proud of the actuator, which matters on a shelf where staff press past the unit several times a day.
  • Internal lacquer can be specified where the fill calls for it; the bare body is standard, and the choice is made with the filler who knows the formulation.
  • Pressure and burst checks run batch by batch in-house, and the records are held against the batch rather than against the delivery date.

Application Scenarios

Retail counters and tills

Counters are where staff stand. A unit at hand height on the route to the exit is easier to take hold of than one stored under the desk.

Kitchen and staff doors

The staff passage is the usual follow-on position, kept clear of hot surfaces and of the swing of a service door carrying trays.

Stockrooms and back areas

Stockrooms need the unit visible from the aisle rather than behind cartons. A wall clip at shoulder height keeps it in sight of a picker.

Small hospitality sites

Guest houses change hands often. A printed body with pictograms shortens the briefing a new staff member needs on their first shift.

Samples & MOQ

Free Blank Samples

Blank cans are supplied free of charge — you only cover the courier cost. Use them to test pressure, spray rate and formulation compatibility.

MOQ 10,000 pcs

Standard MOQ is 10,000 pieces per size and design. Smaller trial quantities can be discussed for a first production run.

Sampling In 3–7 Days

Printed samples typically take 3–7 days. Mass production follows 15–30 days after you approve the pre-production sample.

Customization Options

DiameterStandard range 22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
HeightCustom height from 90 mm to 300 mm (subject to diameter)
Printing1–9 colours offset or silkscreen, plus lacquer and vacuum coating
ValveOne-inch continuous / metered / bag-on-valve, matched to your formulation
CapStandard or custom moulded cap, any colour
SamplesFree blank samples for compatibility testing; printed samples charged

Frequently Asked Questions

On the route between the counter and the exit, at hand height, clear of stock that would have to be moved. Local rules still govern what a premises must hold.

It can. The standard body is bare aluminium, and an internal lacquer is specified where a formulation needs one. That decision sits with the filler.

The buyer does. Wall and shoulder both take print, so pictograms and short text run in the same pass as the brand, but the wording is set locally.

10,000 pcs for a standard size and design, 20,000 pcs with custom printing. Payment is by T/T, L/C, PayPal or Western Union, and samples take 3–7 days.