600 ml Aluminium Aerosol Can for Fire Suppression in Larger Spaces
Where a unit has to cover more ground than a doorway, buyers move to the largest body in the range and accept the extra weight. The 600 ml format is drawn for that trade-off: more fill, a longer body, and a valve that stays stable while the can is held out at arm's length. Sold as an auxiliary discharge device, not as a regulated fire extinguisher; local market rules apply.
- Place of originChina
- Diameter range22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
- PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
- Port of loadingGuangzhou / Shenzhen / Ningbo / Shanghai
- MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
- Payment termsT/T, L/C, PayPal, Western Union — for your selection
- Trade termEXW / DAP / DDP
Product Description
Where a unit has to cover more ground than a doorway, buyers move to the largest body in the range and accept the extra weight. The 600 ml format is drawn for that trade-off: more fill, a longer body, and a valve that stays stable while the can is held out at arm's length. Sold as an auxiliary discharge device, not as a regulated fire extinguisher; local market rules apply.
Key format data: 600 ml nominal capacity. Typical filling applications are fire extinguishing agent, fire suppression spray. Other heights and diameters in the same family can be quoted on request, so the size listed here is a starting point rather than a limit.
This aluminium container is produced in-house from aluminium slug to finished printed can. Body forming, shoulder shaping, internal coating, printing and final inspection all run on the same line, so the wall thickness and pressure performance stay consistent from the first sample to the last pallet of a bulk order.
We supply cans only, or a complete package with valve, actuator and cap selected to match your formulation and filling equipment. Free blank samples are available so your laboratory can confirm pressure, spray rate and compatibility before you commit to tooling or a production run.
Specifications
| Material | Aluminium 99.5% (one-piece / monobloc body) |
|---|---|
| Diameter | Recommended based on your requirements |
| Height | Recommended based on your requirements |
| Nominal volume / weight | 600 ml |
| Neck / valve size | Recommended based on your requirements |
| Shoulder shape | Recommended based on your requirements |
| Recommended contents | Fire extinguishing agent, fire suppression spray |
| Internal coating | Food-grade internal lacquer on request |
| Printing | Up to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating |
| Surface finish | High gloss / matte / pearl / metallic lacquer |
| Cap | Plastic cap — colour matched to your artwork |
| Packing | Carton + pallet, or as per customer instruction |
| MOQ | 10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications |
| Lead time | 15–30 days after sample approval |
Final specifications are confirmed against your artwork and filling line before tooling.
Product Features
- The 600 ml body is drawn as one piece from 99.5% aluminium, so its extra length carries no mid-wall joint when the unit is held out and swung toward a target.
- The base knuckle is radiused rather than squared, spreading the weight of a full body across the foot ring when it is set down on concrete.
- Valve selection follows the fill: a straight stem for a directed stream, a wider orifice where a formulation needs a heavier delivery.
- The dip tube is cut to body height and set at a slight angle, so a can held upward still picks up liquid instead of propellant.
- Silver and blue bodies are standard, and the wall carries 9-colour direct print for site marking, batch coding or a distributor's own identity.
- Each run is sampled for pressure and burst in-house before packing, and the sampled cans are scrapped, so a pass describes the batch rather than one unit.
Application Scenarios
Warehouse aisles
Aisles between racking need a unit that can be aimed along the gap. A straight-stem valve gives the tighter stream that this geometry calls for.
Plant and workshop rooms
Plant rooms concentrate heat sources and cabling. Keep the unit by the door, clear of pipework, cap on and the printed panel legible.
Loading bays and yards
Bays are open to weather and to vehicle movement. A wall clip above splash height keeps the body dry and the valve free of grit.
Site cabins and containers
Cabins move between jobs. A 600 ml body with printed site wording travels as one part number across a contractor's compounds.
Samples & MOQ
Free Blank Samples
Blank cans are supplied free of charge — you only cover the courier cost. Use them to test pressure, spray rate and formulation compatibility.
MOQ 10,000 pcs
Standard MOQ is 10,000 pieces per size and design. Smaller trial quantities can be discussed for a first production run.
Sampling In 3–7 Days
Printed samples typically take 3–7 days. Mass production follows 15–30 days after you approve the pre-production sample.
Customization Options
| Diameter | Standard range 22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm |
|---|---|
| Height | Custom height from 90 mm to 300 mm (subject to diameter) |
| Printing | 1–9 colours offset or silkscreen, plus lacquer and vacuum coating |
| Valve | One-inch continuous / metered / bag-on-valve, matched to your formulation |
| Cap | Standard or custom moulded cap, any colour |
| Samples | Free blank samples for compatibility testing; printed samples charged |
Frequently Asked Questions
Yes. Two hands are better, one at the base and one at the valve. That keeps the aim steady and stops a shifting grip from pressing the actuator early.
The filler does, and the can is built around that. It ships empty; valve, stem and internal finish are set once the intended formulation is known.
No. It is an auxiliary discharge device and not a regulated fire extinguisher, so it does not replace fixed suppression, alarms or the cover a site must hold locally.
Standard runs begin at 10,000 pcs per size and design; a bespoke specification or custom print starts at 20,000 pcs, with 15–30 days after the sample is signed off.
You May Also Like
-
400 ml Aluminium Aerosol Can for a Mini Fire Extinguisher in Vehicle Cabins
400 ml · high pressure · trigger valve option
-
500 ml Aluminium Aerosol Can for Household and Shop Fire Extinguisher Spray
500 ml · high pressure · printed body
-
100 ml Aluminium Aerosol Can for Daily Facial Mist and Toner Layering
100 ml · fine mist · 1-inch valve