45–70 mm Tinplate Spray Valve Assembly for Workshop and Household Cans
A valve that seals on an aluminium body does not seal on steel without a change of setting. The cup is the same 1 inch (25.4 mm) crimp, but it closes onto a harder metal with more springback, and the dip tube has to reach a base dome that sits deeper. These assemblies are set up for tinplate bodies across the 45 to 70 mm range, with the tube cut to the body you name.
- Place of originChina
- Diameter range45 / 52 / 57 / 60 / 65 / 70 mm
- PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
- Port of loadingGuangzhou / Shenzhen / Ningbo / Shanghai
- MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
- Payment termsT/T, L/C, PayPal, Western Union — for your selection
- Trade termEXW / DAP / DDP
Product Description
A valve that seals on an aluminium body does not seal on steel without a change of setting. The cup is the same 1 inch (25.4 mm) crimp, but it closes onto a harder metal with more springback, and the dip tube has to reach a base dome that sits deeper. These assemblies are set up for tinplate bodies across the 45 to 70 mm range, with the tube cut to the body you name.
Key format data: 45 / 52 / 57 / 60 / 65 / 70 mm diameter and — overall height; — nominal capacity. Typical filling applications are cosmetic, household and industrial aerosol products. Other heights and diameters in the same family can be quoted on request, so the size listed here is a starting point rather than a limit.
This 45 / 52 / 57 / 60 / 65 / 70 mm diameter aluminium container is produced in-house from aluminium slug to finished printed can. Body forming, shoulder shaping, internal coating, printing and final inspection all run on the same line, so the wall thickness and pressure performance stay consistent from the first sample to the last pallet of a bulk order.
We supply cans only, or a complete package with valve, actuator and cap selected to match your formulation and filling equipment. Free blank samples are available so your laboratory can confirm pressure, spray rate and compatibility before you commit to tooling or a production run.
Specifications
| Material | Tinplate (tin-coated steel) |
|---|---|
| Diameter | 45 / 52 / 57 / 60 / 65 / 70 mm |
| Height | Recommended based on your requirements |
| Nominal volume / weight | — |
| Neck / valve size | Recommended based on your requirements |
| Shoulder shape | Recommended based on your requirements |
| Recommended contents | Cosmetic, household and industrial aerosol products |
| Internal coating | Food-grade internal lacquer on request |
| Printing | Up to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating |
| Surface finish | High gloss / matte / pearl / metallic lacquer |
| Cap | Plastic cap — colour matched to your artwork |
| Packing | Carton + pallet, or as per customer instruction |
| MOQ | 10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications |
| Lead time | 15–30 days after sample approval |
Final specifications are confirmed against your artwork and filling line before tooling.
Product Features
- Crimp setting is where the difference lives. Steel resists the closing wheel more than aluminium, so a head set for an aluminium can leaves a tinplate cup loose at the edge and weeping at the seam.
- Dip tube length is cut to body height plus dome depth. On a steel can the base dome is deeper than a drawn aluminium base, and a short tube starves the valve over the last third of the fill.
- The gasket decides compatibility, not the can metal. Solvent concentrates soften some compounds, so the gasket grade is chosen against the formula and the propellant together.
- Spray pattern comes from the actuator, not the valve body. The stem orifice sets flow rate and the insert sets cone angle, so a change of pattern need not become a change of valve.
- Cups are standard 1 inch (25.4 mm) crimp across all six diameters, which keeps one crimp head on the line while body sizes change underneath it.
- Valve, dip tube and actuator ship as one assembly, so tube length and stem match by construction rather than by an operator reading two part numbers at the filling head.
Application Scenarios
Solvent Workshop Sprays
Penetrating oil and brake cleaner need a valve that will not swell on aromatic solvent. Gasket grade and stem orifice are set together to give a wet, narrow, reachable pattern.
Household Aerosol Fills
Air freshener and furniture polish run at lower pressure and want a wider cone. The insert is swapped for a broader face and the valve body stays the same part.
Automotive Top-Up Cans
Touch-up lacquer and tyre inflator formulas need a repeatable shot rather than a long fog. That is a stem and orifice question, answered before the can specification is fixed.
Steel Body Retrofit
Brands moving a formula from aluminium to tinplate keep the actuator and the artwork, and change crimp setting and tube length; the visible can need not be redesigned.
Samples & MOQ
Free Blank Samples
Blank cans are supplied free of charge — you only cover the courier cost. Use them to test pressure, spray rate and formulation compatibility.
MOQ 10,000 pcs
Standard MOQ is 10,000 pieces per size and design. Smaller trial quantities can be discussed for a first production run.
Sampling In 3–7 Days
Printed samples typically take 3–7 days. Mass production follows 15–30 days after you approve the pre-production sample.
Customization Options
| Diameter | 45 / 52 / 57 / 60 / 65 / 70 mm |
|---|---|
| Height | Custom height from 90 mm to 300 mm (subject to diameter) |
| Printing | 1–9 colours offset or silkscreen, plus lacquer and vacuum coating |
| Valve | One-inch continuous / metered / bag-on-valve, matched to your formulation |
| Cap | Standard or custom moulded cap, any colour |
| Samples | Free blank samples for compatibility testing; printed samples charged |
Frequently Asked Questions
Usually the crimp is still set for aluminium. Steel springs back further, so the cup needs a different closing dimension and a seam check after crimping, not before.
The cup is the same 1 inch (25.4 mm) crimp, so it will seat. Whether it holds depends on the crimp setting, the gasket grade and whether the tube reaches the deeper steel dome.
The actuator insert. The valve controls flow through the stem orifice; the insert shapes the cone. Swapping the insert is the cheaper route from a jet to a mist.
Buy 10,000 pcs where the size and design are standard, 20,000 pcs where print or specification is bespoke. Blank samples run 3–7 days; production 15–30 days after sample approval.
You May Also Like
-
45–70 mm Tinplate Aerosol Cans for Solvent and Adhesive Sprays
45–70 mm diameter · tin-coated steel · NI and SW types
-
45–70 mm Tinplate Aerosol Can Components for In-House Assembly
Cans plus cones, domes, caps and valve assemblies · 45–70 mm
-
45–70 mm Tinplate Aerosol Can Set with Red Cap for Contract Filling
45–70 mm diameter · can + cone + dome + valve + red cap · tinplate