English
Complete tinplate aerosol can set with red cap, valve, cone and dome assembled in a row across 45 to 70 mm diameters on a packing table

45–70 mm Tinplate Aerosol Can Set with Red Cap for Contract Filling

Three suppliers for body, valve and cap means three arrival dates, three tolerances and one person chasing all of them. This set lands as a matched unit — printed body, cone, dome, valve and red cap in one lot — so the filling line opens one carton instead of reconciling three. The red is held to one reference across every diameter in the run, which is the part buyers notice first when a second shipment arrives.

  • Place of originChina
  • Diameter range45 / 52 / 57 / 60 / 65 / 70 mm
  • PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
  • Port of loadingGuangzhou / Shenzhen / Ningbo / Shanghai
  • MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
  • Payment termsT/T, L/C, PayPal, Western Union — for your selection
  • Trade termEXW / DAP / DDP

Product Description

Three suppliers for body, valve and cap means three arrival dates, three tolerances and one person chasing all of them. This set lands as a matched unit — printed body, cone, dome, valve and red cap in one lot — so the filling line opens one carton instead of reconciling three. The red is held to one reference across every diameter in the run, which is the part buyers notice first when a second shipment arrives.

Key format data: 45 / 52 / 57 / 60 / 65 / 70 mm diameter and — overall height; — nominal capacity. Typical filling applications are cosmetic, household and industrial aerosol products. Other heights and diameters in the same family can be quoted on request, so the size listed here is a starting point rather than a limit.

This 45 / 52 / 57 / 60 / 65 / 70 mm diameter aluminium container is produced in-house from aluminium slug to finished printed can. Body forming, shoulder shaping, internal coating, printing and final inspection all run on the same line, so the wall thickness and pressure performance stay consistent from the first sample to the last pallet of a bulk order.

We supply cans only, or a complete package with valve, actuator and cap selected to match your formulation and filling equipment. Free blank samples are available so your laboratory can confirm pressure, spray rate and compatibility before you commit to tooling or a production run.

Specifications

MaterialTinplate (tin-coated steel)
Diameter45 / 52 / 57 / 60 / 65 / 70 mm
HeightRecommended based on your requirements
Nominal volume / weight—
Neck / valve sizeRecommended based on your requirements
Shoulder shapeRecommended based on your requirements
Recommended contentsCosmetic, household and industrial aerosol products
Internal coatingFood-grade internal lacquer on request
PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
Surface finishHigh gloss / matte / pearl / metallic lacquer
CapPlastic cap — colour matched to your artwork
PackingCarton + pallet, or as per customer instruction
MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
Lead time15–30 days after sample approval

Final specifications are confirmed against your artwork and filling line before tooling.

Product Features

  • A single purchase order covers body, cone, dome, valve and cap. Kits are packed by diameter, so a 52 mm job does not arrive with 57 mm caps loose in the same carton.
  • Cap colour is checked against the printed body, not against a colour book alone. Red reads differently on coated steel than on moulded plastic, so the two are compared under the same light before the run is released.
  • Because every part comes from one production window, cap red and body red share a batch of substrate and ink. Shade drift is what appears six months later, on a reorder placed with a different closure supplier.
  • Incoming inspection drops from three checks to one. The kit is counted and verified as a unit, which shortens the gap between goods-in and the first filled can off the line.
  • Consolidated shipping from Guangzhou, Shenzhen, Ningbo or Shanghai keeps the set on one bill of lading rather than three, which matters where the destination asks for a single customs entry.
  • A set order begins at 10,000 pcs for a standard size; custom print and bespoke specification lift the floor to 20,000 pcs. Blank samples are free before tooling.

Application Scenarios

Contract Fillers

A filler running six SKUs for one brand needs kits to arrive in SKU order. Packing follows the diameter sequence on the purchase order rather than the factory's own line schedule.

Promotional and Seasonal Runs

A red closure reads as campaign colour. Shipping cap with body makes a seasonal change one order, instead of a body order plus a cap order plus the wait between them.

Private Label Launch

Small brands start on one set. At the top of this diameter range steel usually beats a drawn aluminium shell on body cost, and a single invoice shows the difference.

Export Consolidation

Buyers shipping into two markets can split one set order across two ports; kit packing stays identical, so both receiving warehouses handle the pallets the same way.

Samples & MOQ

Free Blank Samples

Blank cans are supplied free of charge — you only cover the courier cost. Use them to test pressure, spray rate and formulation compatibility.

MOQ 10,000 pcs

Standard MOQ is 10,000 pieces per size and design. Smaller trial quantities can be discussed for a first production run.

Sampling In 3–7 Days

Printed samples typically take 3–7 days. Mass production follows 15–30 days after you approve the pre-production sample.

Customization Options

Diameter45 / 52 / 57 / 60 / 65 / 70 mm
HeightCustom height from 90 mm to 300 mm (subject to diameter)
Printing1–9 colours offset or silkscreen, plus lacquer and vacuum coating
ValveOne-inch continuous / metered / bag-on-valve, matched to your formulation
CapStandard or custom moulded cap, any colour
SamplesFree blank samples for compatibility testing; printed samples charged

Frequently Asked Questions

Fixed within a run, and quoted per shade. A different colour is a separate moulded-plastic item, so confirm the shade before the body print is released for plates.

No, though the set price assumes it. Where you already hold a valve contract, body, cone, dome and cap ship as a four-part set with the same kit packing.

By kit at the packing stage and by component at dispatch, so a short count points to the missing part rather than to a whole carton that has to be opened and recounted.

15–30 days after sample approval on the standard path, with samples in 3–7 days. Timings assume all five parts are on the same diameter and the print is released before production starts.

You May Also Like