45–70 mm Tinplate Aerosol Cans for Solvent and Adhesive Sprays
A welded steel body is the reason these cans keep their shape when a 65 or 70 mm diameter has to carry a heavier fill of solvent-based concentrate. Six diameters run on one curl and seam specification, so a brand can climb from a 45 mm touch-up size to a 70 mm workshop size without redesigning the cap. Send the fill weight and the valve choice, and the body specification follows from those two numbers.
- Place of originChina
- Diameter range45 / 52 / 57 / 60 / 65 / 70 mm
- PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
- Port of loadingGuangzhou / Shenzhen / Ningbo / Shanghai
- MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
- Payment termsT/T, L/C, PayPal, Western Union — for your selection
- Trade termEXW / DAP / DDP
Product Description
A welded steel body is the reason these cans keep their shape when a 65 or 70 mm diameter has to carry a heavier fill of solvent-based concentrate. Six diameters run on one curl and seam specification, so a brand can climb from a 45 mm touch-up size to a 70 mm workshop size without redesigning the cap. Send the fill weight and the valve choice, and the body specification follows from those two numbers.
Key format data: 45 / 52 / 57 / 60 / 65 / 70 mm diameter and — overall height; — nominal capacity. Typical filling applications are cosmetic, household and industrial aerosol products. Other heights and diameters in the same family can be quoted on request, so the size listed here is a starting point rather than a limit.
This tinplate aerosol can is supplied in the diameter, cone model and dome model combinations set out in the tables below. The body is tin-coated steel, and the components that go with it can be quoted as one package.
We supply the empty can on its own, or a complete set with valve, actuator and cap selected to match your formulation and filling equipment. Free blank samples are available so your laboratory can confirm fit, pressure and compatibility before you commit to tooling or a production run.
Specifications
| Material | Tinplate (tin-coated steel) |
|---|---|
| Diameter | 45 / 52 / 57 / 60 / 65 / 70 mm |
| Height | Recommended based on your requirements |
| Nominal volume / weight | — |
| Neck / valve size | Recommended based on your requirements |
| Shoulder shape | Recommended based on your requirements |
| Recommended contents | Cosmetic, household and industrial aerosol products |
| Internal coating | Food-grade internal lacquer on request |
| Printing | Up to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating |
| Surface finish | High gloss / matte / pearl / metallic lacquer |
| Cap | Plastic cap — colour matched to your artwork |
| Packing | Carton + pallet, or as per customer instruction |
| MOQ | 10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications |
| Lead time | 15–30 days after sample approval |
Available diameters, cone and dome models
| Diameter (mm) | Type | Cone model | Dome model |
|---|---|---|---|
| 45 | NI | 185 | 190 |
| 52 | NI | 195 | 200 |
| 57 | NI | 201/202 | 203 |
| 60 | NI | 205/205A | 206 |
| 60 | SW | 207.5B | 208 |
| 65 | NI | 207.5A/B/C | 209 |
| 65 | SW | 211 | 211 |
| 70 | NI | 211 | 213 |
Thickness parameters
| Diameter (mm) | Cone thickness (mm) | Dome thickness (mm) |
|---|---|---|
| 45 | 0.26-0.32 | 0.25-0.32 |
| 52 | 0.26-0.32 | 0.25-0.32 |
| 57 | 0.28-0.35 | 0.28-0.35 |
| 60 | 0.28-0.4 | 0.28-0.35 |
| 60 | 0.22-0.43 | 0.38-0.43 |
| 65 | 0.35-0.43 | 0.32-0.4 |
| 70 | 0.35-0.43 | 0.32-0.43 |
Final specifications are confirmed against your artwork and filling line before tooling.
Product Features
- Six diameters — 45, 52, 57, 60, 65 and 70 mm — share one curl and seam specification, which lets a single cap and valve programme cover a full size ladder instead of one can.
- Bodies are formed as necked-in (NI) or straight-wall (SW) types. NI pulls the top down to the 1-inch valve opening and stiffens the shoulder; SW keeps a full-height print panel for wraparound artwork.
- The side seam is welded, then covered by an internal lacquer stripe. On a solvent or water-based formula that stripe is the first place corrosion starts if the coating is specified too thin.
- Tinplate takes a base coat before the 9-colour direct print. Bare tin holds ink poorly at line speed, so the primer is what keeps a dark solid from scuffing on the rails.
- Steel carries a larger diameter without the panel drumming under top load, which is why 65 and 70 mm sizes are common for industrial fills rather than cosmetic ones.
- Order entry starts at 10,000 pcs for each size and print design; bespoke bodies move to 20,000 pcs, with blank samples in 3–7 days.
Application Scenarios
Solvent-Based Industrial Sprays
Brake cleaner, penetrating oil and degreaser sit in 65 or 70 mm bodies where the wide base keeps the can upright on a bench between jobs and resists a knock from a tool tray.
Adhesive and Sealant Cans
Contact adhesive loads both the wall and the base as the propellant pushes out. A welded steel shell holds that load at a diameter where a drawn shell would need a thicker, dearer blank.
Automotive Care Aerosols
Tyre shine, underbody coating and carb cleaner sell in 52 to 60 mm sizes, where a printed steel panel carries dense colour blocks and a barcode straight onto the metal.
Household Technical Sprays
Lubricant, silicone and mould release lines buy 45 and 52 mm bodies for trigger caps; the narrow diameter suits a gloved hand while the wall keeps the cap seating square.
Samples & MOQ
Free Blank Samples
Blank cans are supplied free of charge — you only cover the courier cost. Use them to test pressure, spray rate and formulation compatibility.
MOQ 10,000 pcs
Standard MOQ is 10,000 pieces per size and design. Smaller trial quantities can be discussed for a first production run.
Sampling In 3–7 Days
Printed samples typically take 3–7 days. Mass production follows 15–30 days after you approve the pre-production sample.
Customization Options
| Diameter | 45 / 52 / 57 / 60 / 65 / 70 mm |
|---|---|
| Type | NI and SW |
| Cone model / dome model | 185/190, 195/200, 201-202/203, 205-205A/206, 207.5B/208, 207.5A-B-C/209, 211/211, 211/213 |
| Wall thickness | Cone 0.22–0.43 mm, dome 0.25–0.43 mm, depending on diameter and type |
| Height | Quoted against your fill volume and filling line |
| Valve | Matched to the cone model you choose |
| Cap | Plastic cap, colour matched to your artwork |
| Samples | Free blank samples for fitting and pressure testing |
Frequently Asked Questions
Necked-in reduces the top to the 1-inch (25.4 mm) opening and adds shoulder stiffness; straight wall keeps the full diameter up to the curl for a taller uninterrupted print area. Choose by artwork height and by the cap you already hold, not by unit cost.
The seam itself limits nothing, but the lacquer stripe over it has to suit the concentrate. Aggressive solvents need the coating film confirmed against the formula before the first production run, not after the cans are filled.
Not for a 9-colour job. Tinplate needs a primer for ink adhesion and for density on large solids; skipping it shows up as scuffing at the guide rails and dull patches after forming.
10,000 pcs is the floor for one size and one design on a standard body, and 20,000 pcs where the print or the dimensions are bespoke. Samples take 3–7 days, bulk 15–30 days after sample approval.
You May Also Like
-
45–70 mm Tinplate Aerosol Can Components for In-House Assembly
Cans plus cones, domes, caps and valve assemblies · 45–70 mm
-
45–70 mm Tinplate Aerosol Can Set with Red Cap for Contract Filling
45–70 mm diameter · can + cone + dome + valve + red cap · tinplate
-
45–70 mm Tinplate Spray Valve Assembly for Workshop and Household Cans
45–70 mm diameter · spray valve + dip tube + actuator · tinplate