50 ml Perfume Aluminum Bottle with White Overcap and Gold Neck Ring
At 50 ml the closure is proportionally the largest thing on the pack. A white overcap on a white body leaves the neck as the only feature, and the narrow gold ring at the crimp is what stops the pack reading as a blank tube.
- Place of originChina
- Diameter range22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
- PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
- Port of loadingGuangzhou / Shenzhen / Ningbo / Shanghai
- MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
- Payment termsT/T, L/C, PayPal, Western Union — for your selection
- Trade termEXW / DAP / DDP
Product Description
At 50 ml the closure is proportionally the largest thing on the pack. A white overcap on a white body leaves the neck as the only feature, and the narrow gold ring at the crimp is what stops the pack reading as a blank tube.
Key format data: 50 ml nominal capacity. Other heights and diameters in the same family can be quoted on request, so the size listed here is a starting point rather than a limit.
This aluminium container is produced in-house from aluminium slug to finished printed can. Body forming, shoulder shaping, internal coating, printing and final inspection all run on the same line, so the wall thickness and pressure performance stay consistent from the first sample to the last pallet of a bulk order.
We supply cans only, or a complete package with valve, actuator and cap selected to match your formulation and filling equipment. Free blank samples are available so your laboratory can confirm pressure, spray rate and compatibility before you commit to tooling or a production run.
Specifications
| Material | Aluminium 99.5% (one-piece / monobloc body) |
|---|---|
| Diameter | Recommended based on your requirements |
| Height | Recommended based on your requirements |
| Nominal volume / weight | 50 ml |
| Neck / valve size | Recommended based on your requirements |
| Shoulder shape | Recommended based on your requirements |
| Recommended contents | — |
| Internal coating | Food-grade internal lacquer on request |
| Printing | Up to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating |
| Surface finish | High gloss / matte / pearl / metallic lacquer |
| Cap | Plastic cap — colour matched to your artwork |
| Packing | Carton + pallet, or as per customer instruction |
| MOQ | 10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications |
| Lead time | 15–30 days after sample approval |
Final specifications are confirmed against your artwork and filling line before tooling.
Product Features
- A 50 ml body is short enough that the cap holds a large share of the silhouette, so cap proportion has to be drawn with the body rather than chosen afterwards.
- The gold ring is a thin turned ring at the crimp line, not a full collar; it is the only colour break on an otherwise single-colour pack.
- White overcap on a white body means the joint has to be an even gap. Any mismatch reads as a badly fitted lid rather than as a design line.
- Small formats are handled more, not less: a travel size goes in and out of a bag daily, so cap retention is the failure mode worth specifying.
- The ring also protects the crimp edge from knocks, which on a short body sits close to the shoulder where the hand grips.
- Cap and ring are made to the same diameter, so substituting either from another supplier changes the silhouette immediately.
Application Scenarios
Travel and cabin sizes
50 ml sits in the carry-on range and in the gift-with-purchase tier of a fragrance launch.
Discovery and sampling sets
A short body keeps a discovery set compact while still carrying a full label and a readable brand block.
Hotel and amenity
Small formats where the closure has to survive repeated handling by guests rather than by one owner.
Gift with purchase
The gold ring supplies a premium cue at small-format cost, without a second body colour to manage.
Samples & MOQ
Free Blank Samples
Blank cans are supplied free of charge — you only cover the courier cost. Use them to test pressure, spray rate and formulation compatibility.
MOQ 10,000 pcs
Standard MOQ is 10,000 pieces per size and design. Smaller trial quantities can be discussed for a first production run.
Sampling In 3–7 Days
Printed samples typically take 3–7 days. Mass production follows 15–30 days after you approve the pre-production sample.
Customization Options
| Diameter | Standard range 22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm |
|---|---|
| Height | Custom height from 90 mm to 300 mm (subject to diameter) |
| Printing | 1–9 colours offset or silkscreen, plus lacquer and vacuum coating |
| Valve | One-inch continuous / metered / bag-on-valve, matched to your formulation |
| Cap | Standard or custom moulded cap, any colour |
| Samples | Free blank samples for compatibility testing; printed samples charged |
Frequently Asked Questions
10,000 pieces per size and design as standard; 20,000 pieces where the ring tone or the cap colour is a bespoke match.
No. It is a narrow turned ring at the crimp line. Full collars are used on the 100 ml bodies; on a 50 ml body a full collar would cover most of the shoulder.
Yes, and on a small format that is usually the intent. Send both references and they are matched as a pair so the joint line stays consistent.
Carton and pallet with the cap fitted. Because the body is short, carton count per layer is quoted with the order so pallet height stays predictable.
You May Also Like
-
50 ml Aluminium Aerosol Perfume Spray Bottle for Pocket Deodorant Touch-Up
50 ml · aluminium body, valve & actuator · deodorant spray
-
100 ml Black Aluminium Aerosol Perfume Bottle for Body Spray
100 ml · black body, black valve & cap · body spray
-
100 ml White & Gold Aluminium Aerosol Perfume Bottle for Full Body Spray
100 ml · white body, gold shoulder & cap · full body spray