English
50 ml aluminium perfume spray bottle held between thumb and forefinger, black actuator and cap fitted, scale shown against a hand

50 ml Aluminium Aerosol Perfume Spray Bottle for Pocket Deodorant Touch-Up

A 50 ml fragrance pack gets pressed with a thumb, often while walking, and is judged within the first second. Short body, short stroke: actuator travel and spring load decide whether one press delivers a complete dry shot or a hesitant sputter.

  • Place of originChina
  • Diameter range22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
  • PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
  • Port of loadingGuangzhou / Shenzhen / Ningbo / Shanghai
  • MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
  • Payment termsT/T, L/C, PayPal, Western Union — for your selection
  • Trade termEXW / DAP / DDP

Product Description

A 50 ml fragrance pack gets pressed with a thumb, often while walking, and is judged within the first second. Short body, short stroke: actuator travel and spring load decide whether one press delivers a complete dry shot or a hesitant sputter.

Key format data: 50 ml nominal capacity. Typical filling applications are body spray, full body spray, perfume spray, deodorant spray. Other heights and diameters in the same family can be quoted on request, so the size listed here is a starting point rather than a limit.

This aluminium container is produced in-house from aluminium slug to finished printed can. Body forming, shoulder shaping, internal coating, printing and final inspection all run on the same line, so the wall thickness and pressure performance stay consistent from the first sample to the last pallet of a bulk order.

We supply cans only, or a complete package with valve, actuator and cap selected to match your formulation and filling equipment. Free blank samples are available so your laboratory can confirm pressure, spray rate and compatibility before you commit to tooling or a production run.

Specifications

MaterialAluminium 99.5% (one-piece / monobloc body)
DiameterRecommended based on your requirements
HeightRecommended based on your requirements
Nominal volume / weight50 ml
Neck / valve sizeRecommended based on your requirements
Shoulder shapeRecommended based on your requirements
Recommended contentsBody spray, full body spray, perfume spray, deodorant spray
Internal coatingFood-grade internal lacquer on request
PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
Surface finishHigh gloss / matte / pearl / metallic lacquer
CapPlastic cap — colour matched to your artwork
PackingCarton + pallet, or as per customer instruction
MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
Lead time15–30 days after sample approval

Final specifications are confirmed against your artwork and filling line before tooling.

Product Features

  • Actuator travel on a small body is short, so spring load is set light enough that a thumb press made at an awkward angle still bottoms the stem and opens the valve fully.
  • A half press is the usual cause of a wet spit rather than a mist; a defined detent at the end of the stroke gives the user a positive stop to press against.
  • Fragrance concentrate carries a heavy solvent load, and that solvent will work at an unprotected wall, so an internal lacquer is specified before decoration on any strong alcohol base.
  • At 50 ml the headspace stays small relative to the fill, so the pressure curve is nearly flat across the whole can and the last press behaves much like the first.
  • A fine, dry pattern suits a pocket pack because the user sprays at close range onto skin and cannot stand waiting for a wet film to flash off in a queue.
  • Overcap retention matters as much as the valve: a cap that lifts inside a bag leaves the actuator exposed to a key or a coin, and the can empties into the lining.

Application Scenarios

Handbag and pocket carry

Fragrance worn as a top-up through the day, sprayed on wrist or neck while standing in line, where a light stroke and small body suit a hurried press.

Deodorant companion

Sold as a two-piece set with a roll-on or stick, the small can covers the scent layer while the solid handles odour control on the same shelf.

Sampling and gift sets

A low unit cost lets a fragrance house put a real spray pack rather than a vial into a discovery box, so the trial matches the retail experience.

Travel retail minis

Short trips and cabin pouches favour a small aluminium pack over glass, mainly because there is no breakage risk inside a soft bag.

Samples & MOQ

Free Blank Samples

Blank cans are supplied free of charge — you only cover the courier cost. Use them to test pressure, spray rate and formulation compatibility.

MOQ 10,000 pcs

Standard MOQ is 10,000 pieces per size and design. Smaller trial quantities can be discussed for a first production run.

Sampling In 3–7 Days

Printed samples typically take 3–7 days. Mass production follows 15–30 days after you approve the pre-production sample.

Customization Options

DiameterStandard range 22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
HeightCustom height from 90 mm to 300 mm (subject to diameter)
Printing1–9 colours offset or silkscreen, plus lacquer and vacuum coating
ValveOne-inch continuous / metered / bag-on-valve, matched to your formulation
CapStandard or custom moulded cap, any colour
SamplesFree blank samples for compatibility testing; printed samples charged

Frequently Asked Questions

Only if the brand wants a fixed dose per press. A continuous valve with a small stem bore is the usual choice for fragrance, since metering adds cost and a click the user did not ask for.

Concentrated oils and alcohol can attack bare metal, and the reaction is slow enough to stay hidden until the pack has spent time on a shelf. Specify a lacquer and keep the crimp zone clean during filling.

A smaller stem bore, more mechanical breakup at the actuator, and a short nozzle-to-skin distance. Dryness comes from those three together, not from any single part.

10,000 pcs per size and design on the standard body; a bespoke print or spec moves to 20,000 pcs. Blank samples ship before tooling so the trigger feel can be tested in hand.

You May Also Like