English
100 ml white aluminium perfume can with gold-toned shoulder and cap, standing on a pale surface with soft shadow, no print on the body

100 ml White & Gold Aluminium Aerosol Perfume Bottle for Full Body Spray

White and gold is a two-tone problem before it is a colour problem. A pale coat shows every irregularity in the aluminium beneath it, and the gold shoulder has to stop on a clean line where the body turns, so the pack is judged on surface preparation as much as on shade.

  • Place of originChina
  • Diameter range22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
  • PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
  • Port of loadingGuangzhou / Shenzhen / Ningbo / Shanghai
  • MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
  • Payment termsT/T, L/C, PayPal, Western Union — for your selection
  • Trade termEXW / DAP / DDP

Product Description

White and gold is a two-tone problem before it is a colour problem. A pale coat shows every irregularity in the aluminium beneath it, and the gold shoulder has to stop on a clean line where the body turns, so the pack is judged on surface preparation as much as on shade.

Key format data: 100 ml nominal capacity. Typical filling applications are body spray, full body spray, perfume spray, deodorant spray. Other heights and diameters in the same family can be quoted on request, so the size listed here is a starting point rather than a limit.

This aluminium container is produced in-house from aluminium slug to finished printed can. Body forming, shoulder shaping, internal coating, printing and final inspection all run on the same line, so the wall thickness and pressure performance stay consistent from the first sample to the last pallet of a bulk order.

We supply cans only, or a complete package with valve, actuator and cap selected to match your formulation and filling equipment. Free blank samples are available so your laboratory can confirm pressure, spray rate and compatibility before you commit to tooling or a production run.

Specifications

MaterialAluminium 99.5% (one-piece / monobloc body)
DiameterRecommended based on your requirements
HeightRecommended based on your requirements
Nominal volume / weight100 ml
Neck / valve sizeRecommended based on your requirements
Shoulder shapeRecommended based on your requirements
Recommended contentsBody spray, full body spray, perfume spray, deodorant spray
Internal coatingFood-grade internal lacquer on request
PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
Surface finishHigh gloss / matte / pearl / metallic lacquer
CapPlastic cap — colour matched to your artwork
PackingCarton + pallet, or as per customer instruction
MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
Lead time15–30 days after sample approval

Final specifications are confirmed against your artwork and filling line before tooling.

Product Features

  • White hides nothing. A dent, a polishing ring or a draw mark on the wall telegraphs straight through a thin pale coat, so bodies for this finish are screened for surface before any paint goes on.
  • Coverage comes from a primer that levels the wall and then a white topcoat; adding more white on its own makes the film brittle without hiding the substrate.
  • The gold shoulder is masked at the body-to-shoulder transition. That boundary is a hard edge on a curve, and any bleed shows as a ragged ring once the cap comes off.
  • Gold foil on white has low contrast, so a registration error that would be invisible on black becomes the first thing a buyer sees at the edge of the mark.
  • Silkscreen on white needs fewer passes than on a dark body, yet edge definition is more visible, so fine serif type and thin rules are where a pale pack reads clean or looks blurred.
  • Gold-toned cap and shoulder have to hold a consistent sheen, because a matte cap against a bright shoulder reads as two different metals on one pack.

Application Scenarios

Women's fragrance sets

The light body reads well beside glass in a gift box, and a full-body spray format widens use beyond pulse points to shoulders and hair.

Bridal and occasion

White and gold sits inside wedding and event palettes, and the same body can carry a monogram stamp for a private commission.

Pharmacy beauty shelf

Bright store lighting punishes uneven gloss, so a levelled primer and a clean shoulder edge keep the pack consistent across a facing of ten units.

Full body application

A wider-pattern actuator suits spraying over shoulders and décolletage after a shower, where the user wants coverage rather than a pinpoint hit.

Samples & MOQ

Free Blank Samples

Blank cans are supplied free of charge — you only cover the courier cost. Use them to test pressure, spray rate and formulation compatibility.

MOQ 10,000 pcs

Standard MOQ is 10,000 pieces per size and design. Smaller trial quantities can be discussed for a first production run.

Sampling In 3–7 Days

Printed samples typically take 3–7 days. Mass production follows 15–30 days after you approve the pre-production sample.

Customization Options

DiameterStandard range 22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
HeightCustom height from 90 mm to 300 mm (subject to diameter)
Printing1–9 colours offset or silkscreen, plus lacquer and vacuum coating
ValveOne-inch continuous / metered / bag-on-valve, matched to your formulation
CapStandard or custom moulded cap, any colour
SamplesFree blank samples for compatibility testing; printed samples charged

Frequently Asked Questions

It can, but the transition then depends on print registration over a curve. A separate gold-toned shoulder and cap gives a mechanical edge and avoids ink building up at the radius.

A pale film reflects light back through itself, so any variation in thickness or surface flatness shows. Black absorbs that variation, while white amplifies it.

The foil system is chosen for the lacquer it lands on, not for the colour beneath. White topcoats are usually harder, so foil grade and dwell time are set against that surface during sampling.

Bespoke specification and custom printing start at 20,000 pcs; standard sizes are 10,000 pcs per size and design. Samples take 3 to 7 days and bulk 15 to 30 days after sign-off.

You May Also Like