100 ml Black Aluminium Aerosol Perfume Bottle for Body Spray
Gloss black is the least forgiving finish you can put on a drawn aluminium body. Every spinning mark, every variation in film build and every scuff on the shoulder reads as a defect, so the colour is built in layers rather than sprayed on once.
- Place of originChina
- Diameter range22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
- PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
- Port of loadingGuangzhou / Shenzhen / Ningbo / Shanghai
- MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
- Payment termsT/T, L/C, PayPal, Western Union — for your selection
- Trade termEXW / DAP / DDP
Product Description
Gloss black is the least forgiving finish you can put on a drawn aluminium body. Every spinning mark, every variation in film build and every scuff on the shoulder reads as a defect, so the colour is built in layers rather than sprayed on once.
Key format data: 100 ml nominal capacity. Typical filling applications are body spray, full body spray, perfume spray, deodorant spray. Other heights and diameters in the same family can be quoted on request, so the size listed here is a starting point rather than a limit.
This aluminium container is produced in-house from aluminium slug to finished printed can. Body forming, shoulder shaping, internal coating, printing and final inspection all run on the same line, so the wall thickness and pressure performance stay consistent from the first sample to the last pallet of a bulk order.
We supply cans only, or a complete package with valve, actuator and cap selected to match your formulation and filling equipment. Free blank samples are available so your laboratory can confirm pressure, spray rate and compatibility before you commit to tooling or a production run.
Specifications
| Material | Aluminium 99.5% (one-piece / monobloc body) |
|---|---|
| Diameter | Recommended based on your requirements |
| Height | Recommended based on your requirements |
| Nominal volume / weight | 100 ml |
| Neck / valve size | Recommended based on your requirements |
| Shoulder shape | Recommended based on your requirements |
| Recommended contents | Body spray, full body spray, perfume spray, deodorant spray |
| Internal coating | Food-grade internal lacquer on request |
| Printing | Up to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating |
| Surface finish | High gloss / matte / pearl / metallic lacquer |
| Cap | Plastic cap — colour matched to your artwork |
| Packing | Carton + pallet, or as per customer instruction |
| MOQ | 10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications |
| Lead time | 15–30 days after sample approval |
Final specifications are confirmed against your artwork and filling line before tooling.
Product Features
- Black needs a base thick enough to bury substrate grain and the drawing marks left where the wall turns into the shoulder; one pass leaves a shadow line that only appears under raking light.
- Two base coats, flashed between passes, give the depth that makes the colour read as black rather than as dark metal showing through a thin film.
- Printing colour onto black means a white flood first. Any design with linework needs that opaque underlayer, or the nine-colour print sits dull and fine type disappears.
- Hot stamping onto a dark curved wall is a registration exercise: the foil edge has to follow the body taper, and a shift of a fraction of a millimetre shows as a bright sliver against black.
- Valve cup and cap are colour-matched to the body so the pack reads as one object; a bright cup on a black shoulder is the fastest way to make good lacquer look unfinished.
- Black also hides product residue at the crimp better than any pale colour, a practical advantage on a body spray that gets handled daily inside a bag.
Application Scenarios
Men's body spray line
A dark pack fits the category's shelf language, and the same body carries a deodorant variant where the print and fragrance name change but the can does not.
Fragrance gifting
Boxed sets pair this size with a smaller can; keeping lacquer and sheen matched across two bodies makes the set look deliberate rather than assembled.
Club and night-out retail
Impulse shelves favour a pack that photographs well in low light, and gloss black with a stamped mark gives a strong highlight without extra hardware.
Limited editions
A seasonal design prints over the same black base, so a brand releases a variant without new tooling or a second colour-matching round.
Samples & MOQ
Free Blank Samples
Blank cans are supplied free of charge — you only cover the courier cost. Use them to test pressure, spray rate and formulation compatibility.
MOQ 10,000 pcs
Standard MOQ is 10,000 pieces per size and design. Smaller trial quantities can be discussed for a first production run.
Sampling In 3–7 Days
Printed samples typically take 3–7 days. Mass production follows 15–30 days after you approve the pre-production sample.
Customization Options
| Diameter | Standard range 22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm |
|---|---|
| Height | Custom height from 90 mm to 300 mm (subject to diameter) |
| Printing | 1–9 colours offset or silkscreen, plus lacquer and vacuum coating |
| Valve | One-inch continuous / metered / bag-on-valve, matched to your formulation |
| Cap | Standard or custom moulded cap, any colour |
| Samples | Free blank samples for compatibility testing; printed samples charged |
Frequently Asked Questions
Film build thins where the wall curves into the shoulder, so the substrate shows through. Extra passes at that zone, or a shoulder-specific spray pattern, is the correction; it is a coating problem, not a pigment one.
Only over a white flood coat. Without it the print loses opacity and fine type fills in; the flood also shields the print from solvent in the base coat during curing.
Tighter than flat printing, because the foil has to wrap. Artwork should keep a clear margin around any stamped element, and the foil edge should never run across the shoulder radius.
Caps go on after crimping and cartons carry dividers, since a scuff on gloss black cannot be polished out without breaking the lacquer. Bulk ships 15 to 30 days after sign-off.
You May Also Like
-
50 ml Aluminium Aerosol Perfume Spray Bottle for Pocket Deodorant Touch-Up
50 ml · aluminium body, valve & actuator · deodorant spray
-
100 ml White & Gold Aluminium Aerosol Perfume Bottle for Full Body Spray
100 ml · white body, gold shoulder & cap · full body spray
-
120 ml Black Aluminium Aerosol Perfume Bottle for Daily Wear
120 ml · black body, black valve & cap · perfume & deodorant