English
White aluminium perfume bottle with a gold shoulder collar and exposed gold actuator, beside two bottles carrying black and gold collar rings

100 ml Perfume Aerosol Can with Gold Collar and Exposed Actuator

This version ships without an overcap: the actuator is the top of the pack. That changes the specification from decoration to wear resistance, because the part a customer presses is the part that has to survive being pressed.

  • Place of originChina
  • Diameter range22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
  • PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
  • Port of loadingGuangzhou / Shenzhen / Ningbo / Shanghai
  • MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
  • Payment termsT/T, L/C, PayPal, Western Union — for your selection
  • Trade termEXW / DAP / DDP

Product Description

This version ships without an overcap: the actuator is the top of the pack. That changes the specification from decoration to wear resistance, because the part a customer presses is the part that has to survive being pressed.

Key format data: 100 ml nominal capacity. Other heights and diameters in the same family can be quoted on request, so the size listed here is a starting point rather than a limit.

This aluminium container is produced in-house from aluminium slug to finished printed can. Body forming, shoulder shaping, internal coating, printing and final inspection all run on the same line, so the wall thickness and pressure performance stay consistent from the first sample to the last pallet of a bulk order.

We supply cans only, or a complete package with valve, actuator and cap selected to match your formulation and filling equipment. Free blank samples are available so your laboratory can confirm pressure, spray rate and compatibility before you commit to tooling or a production run.

Specifications

MaterialAluminium 99.5% (one-piece / monobloc body)
DiameterRecommended based on your requirements
HeightRecommended based on your requirements
Nominal volume / weight100 ml
Neck / valve sizeRecommended based on your requirements
Shoulder shapeRecommended based on your requirements
Recommended contents—
Internal coatingFood-grade internal lacquer on request
PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
Surface finishHigh gloss / matte / pearl / metallic lacquer
CapPlastic cap — colour matched to your artwork
PackingCarton + pallet, or as per customer instruction
MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
Lead time15–30 days after sample approval

Final specifications are confirmed against your artwork and filling line before tooling.

Product Features

  • With no overcap the actuator is exposed in the carton and on the shelf, so it has to hold its finish through handling instead of being protected until sale.
  • The gold collar is a turned ring sitting over the crimp; its inner diameter centres the valve, so the ring tolerance matters as much as its colour.
  • An exposed actuator lets a tester spray without removing anything, which is why this configuration is usual on sampling counters and in gift sets.
  • Gold film on a curved ring wears at the outer edge first. Specifying the wear surface rather than the whole ring keeps cost where the customer actually looks.
  • Without a cap, the carton has to carry the top clearance, so board height and internal fitment are quoted together with the bottle rather than separately.
  • Actuator and collar are dimensioned as a pair: a collar that sits a fraction high leaves a visible line of bare crimp beneath the actuator.

Application Scenarios

Tester and sampling units

Testers can be sprayed without opening the pack, which is the whole point of leaving the actuator exposed.

Gift and coffret sets

No overcap removes a part that would otherwise have to be colour-matched inside the box and found again after opening.

Travel retail counters

Open actuators suit counters where staff demonstrate the spray rather than leaving the pack on a shelf.

Short-run filling

A cap-free pack is quicker to fill and close, which matters on short runs where changeover dominates the line time.

Samples & MOQ

Free Blank Samples

Blank cans are supplied free of charge — you only cover the courier cost. Use them to test pressure, spray rate and formulation compatibility.

MOQ 10,000 pcs

Standard MOQ is 10,000 pieces per size and design. Smaller trial quantities can be discussed for a first production run.

Sampling In 3–7 Days

Printed samples typically take 3–7 days. Mass production follows 15–30 days after you approve the pre-production sample.

Customization Options

DiameterStandard range 22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
HeightCustom height from 90 mm to 300 mm (subject to diameter)
Printing1–9 colours offset or silkscreen, plus lacquer and vacuum coating
ValveOne-inch continuous / metered / bag-on-valve, matched to your formulation
CapStandard or custom moulded cap, any colour
SamplesFree blank samples for compatibility testing; printed samples charged

Frequently Asked Questions

10,000 pieces per size and design; 20,000 pieces where the gold tone is a bespoke match or a new collar diameter has to be cut.

Yes. The collar accepts the standard overcap in this range, so the same body can ship capped or exposed; only the carton height changes.

As a single reference applied to collar and actuator together. Supplying the two from separate references is the usual cause of a visible mismatch at the joint.

It ships with the actuator fitted and the carton sized to protect it. Tell us the shipping method and the carton, with any internal fitment, is quoted alongside the bottle.

You May Also Like