English
200 ml hair mousse can with cream foam actuator, white foam dollop in an open palm showing shape retention, styling context

200 ml Hair Mousse Can for Styling Foam & Root Application

Hair foam is judged in the first half minute: how long the dollop holds before it slumps, and what is left on the hair once it dries. Both come from the fill and the actuator rather than the can, and both are visible to a customer on first use.

  • Place of originChina
  • Diameter range22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
  • PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
  • Port of loadingGuangzhou / Shenzhen / Ningbo / Shanghai
  • MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
  • Payment termsT/T, L/C, PayPal, Western Union — for your selection
  • Trade termEXW / DAP / DDP

Product Description

Hair foam is judged in the first half minute: how long the dollop holds before it slumps, and what is left on the hair once it dries. Both come from the fill and the actuator rather than the can, and both are visible to a customer on first use.

Key format data: 200 ml nominal capacity. Typical filling applications are hair mousse, shaving foam, styling foam. Other heights and diameters in the same family can be quoted on request, so the size listed here is a starting point rather than a limit.

This aluminium container is produced in-house from aluminium slug to finished printed can. Body forming, shoulder shaping, internal coating, printing and final inspection all run on the same line, so the wall thickness and pressure performance stay consistent from the first sample to the last pallet of a bulk order.

We supply cans only, or a complete package with valve, actuator and cap selected to match your formulation and filling equipment. Free blank samples are available so your laboratory can confirm pressure, spray rate and compatibility before you commit to tooling or a production run.

Specifications

MaterialAluminium 99.5% (one-piece / monobloc body)
DiameterRecommended based on your requirements
HeightRecommended based on your requirements
Nominal volume / weight200 ml
Neck / valve sizeRecommended based on your requirements
Shoulder shapeRecommended based on your requirements
Recommended contentsHair mousse, shaving foam, styling foam
Internal coatingFood-grade internal lacquer on request
PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
Surface finishHigh gloss / matte / pearl / metallic lacquer
CapPlastic cap — colour matched to your artwork
PackingCarton + pallet, or as per customer instruction
MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
Lead time15–30 days after sample approval

Final specifications are confirmed against your artwork and filling line before tooling.

Product Features

  • A foam that collapses too fast runs down the hand before it gets to the hair; too slow and it sits on the surface instead of spreading through the lengths.
  • Collapse time is set by surfactant and propellant balance in the fill, and the actuator outlet adds a second variable by controlling how much air enters.
  • Residue after drying comes from the polymer load in the concentrate: a heavier load gives firmer setting and leaves more visible film when brushed out.
  • The can has to be shaken before each use to redisperse the concentrate; a 200 ml fill leaves enough headspace for that without the valve sputtering.
  • Styling is often done with the can inverted at the roots, so dip tube length and the valve's ability to draw at an angle are practical constraints.
  • A 200 ml body covers a typical styling routine for weeks, which is why hair foam rarely ships in the smallest format.

Application Scenarios

Root Application

Foam is worked into the roots with the can held close; a dollop that holds its shape stays where the hand can spread it.

Salon Styling Stations

Stylists use foam in short bursts across several clients; a 200 ml can sits in a holster and the valve recovers between presses.

Hair Care Aisle

Hair foam competes on shelf with sprays and gels, so the printed body carries a foam texture image to show what comes out of the nozzle.

Barber Shave Foam

The same 200 ml body serves shaving foam, where a denser lather that stays on the face beats one that collapses in the basin.

Samples & MOQ

Free Blank Samples

Blank cans are supplied free of charge — you only cover the courier cost. Use them to test pressure, spray rate and formulation compatibility.

MOQ 10,000 pcs

Standard MOQ is 10,000 pieces per size and design. Smaller trial quantities can be discussed for a first production run.

Sampling In 3–7 Days

Printed samples typically take 3–7 days. Mass production follows 15–30 days after you approve the pre-production sample.

Customization Options

DiameterStandard range 22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
HeightCustom height from 90 mm to 300 mm (subject to diameter)
Printing1–9 colours offset or silkscreen, plus lacquer and vacuum coating
ValveOne-inch continuous / metered / bag-on-valve, matched to your formulation
CapStandard or custom moulded cap, any colour
SamplesFree blank samples for compatibility testing; printed samples charged

Frequently Asked Questions

The fill's surfactant and propellant ratio, plus the actuator's air intake. A can alone cannot correct a foam that collapses too quickly.

Polymer load in the concentrate. More polymer means firmer setting and more film left on the hair; that balance is a formulation decision.

It can be inverted for root work, but the dip tube has to match the fill level so the valve does not draw propellant only.

It is the usual size for a styling station: large enough to limit swaps, small enough to keep the wrist steady through a sequence.

You May Also Like