English
200 ml sloped-shoulder aluminium mousse can on a retail shelf, angled top plane facing the camera with a printed mark, body and shower foam context

200 ml Sloped Shoulder Mousse Can for Body & Shower Foam

On a shelf, the top of a can is what a standing shopper sees first. An angled shoulder turns that top into a readable plane, so a mark placed on the slope stays legible from above while the body carries the product copy. That geometry, not the fill weight, is why 200 ml sloped cans hold the main body-foam slot in many ranges.

  • Place of originChina
  • Diameter range22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
  • PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
  • Port of loadingGuangzhou / Shenzhen / Ningbo / Shanghai
  • MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
  • Payment termsT/T, L/C, PayPal, Western Union — for your selection
  • Trade termEXW / DAP / DDP

Product Description

On a shelf, the top of a can is what a standing shopper sees first. An angled shoulder turns that top into a readable plane, so a mark placed on the slope stays legible from above while the body carries the product copy. That geometry, not the fill weight, is why 200 ml sloped cans hold the main body-foam slot in many ranges.

Key format data: 200 ml nominal capacity. Typical filling applications are cosmetic mousse, facial foam, cleansing foam. Other heights and diameters in the same family can be quoted on request, so the size listed here is a starting point rather than a limit.

This aluminium container is produced in-house from aluminium slug to finished printed can. Body forming, shoulder shaping, internal coating, printing and final inspection all run on the same line, so the wall thickness and pressure performance stay consistent from the first sample to the last pallet of a bulk order.

We supply cans only, or a complete package with valve, actuator and cap selected to match your formulation and filling equipment. Free blank samples are available so your laboratory can confirm pressure, spray rate and compatibility before you commit to tooling or a production run.

Specifications

MaterialAluminium 99.5% (one-piece / monobloc body)
DiameterRecommended based on your requirements
HeightRecommended based on your requirements
Nominal volume / weight200 ml
Neck / valve sizeRecommended based on your requirements
Shoulder shapeSloped shoulder
Recommended contentsCosmetic mousse, facial foam, cleansing foam
Internal coatingFood-grade internal lacquer on request
PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
Surface finishHigh gloss / matte / pearl / metallic lacquer
CapPlastic cap — colour matched to your artwork
PackingCarton + pallet, or as per customer instruction
MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
Lead time15–30 days after sample approval

Final specifications are confirmed against your artwork and filling line before tooling.

Product Features

  • The slope forms a tilted plane between body and valve cup, wide enough to carry a mark that reads at standing eye level.
  • Because the plane is flatter than a dome, self-adhesive labels applied there wrinkle less at the edges during manual or semi-automatic application.
  • A 200 ml fill sits between trial and bulk: tall enough for a two-panel layout, short enough to clear a standard shelf edge.
  • Body print runs 9 colours up to the shoulder edge, and the angled face is usually left clear so a label or foil mark can be added later.
  • The near-flat top also takes a printed or debossed batch code without the distortion a curved dome introduces.
  • Tray depth for sloped 200 ml cans is set by the top diameter, since the shoulder will not enter the base recess of the can stacked above.

Application Scenarios

Body & Shower Foam

Shower foam is bought on repeat; a 200 ml can with a readable top plane keeps the range mark visible in a bathroom rack where only the tops show.

Gift & Seasonal Packs

Seasonal sets change artwork each year; the clear slope accepts a dated label, so the can itself does not need retooling between campaigns.

Salon Backbar

Backbar foam is dispensed by staff from a shelf above the basin; the tilted top turns the label toward the person reaching for it.

Drugstore Endcaps

Endcap units are shallow and stacked high; the slope gives a place for a price sticker that does not overlap the front panel.

Samples & MOQ

Free Blank Samples

Blank cans are supplied free of charge — you only cover the courier cost. Use them to test pressure, spray rate and formulation compatibility.

MOQ 10,000 pcs

Standard MOQ is 10,000 pieces per size and design. Smaller trial quantities can be discussed for a first production run.

Sampling In 3–7 Days

Printed samples typically take 3–7 days. Mass production follows 15–30 days after you approve the pre-production sample.

Customization Options

DiameterStandard range 22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
HeightCustom height from 90 mm to 300 mm (subject to diameter)
Printing1–9 colours offset or silkscreen, plus lacquer and vacuum coating
ValveOne-inch continuous / metered / bag-on-valve, matched to your formulation
CapStandard or custom moulded cap, any colour
SamplesFree blank samples for compatibility testing; printed samples charged

Frequently Asked Questions

The sloped top gives a second, near-horizontal surface for a mark or label. If your artwork must wrap without interruption, the round version is the better fit.

It can, but the angle limits coverage near the valve cup. Most layouts keep the slope clear and reserve it for a label or a foil mark.

Upright, on the base. The slope does not affect filling or crimping; the 1 inch (25.4 mm) crimp sits on the same centre axis.

10,000 pcs per size and design for the standard can, 20,000 pcs for custom printing or bespoke dimensions. Samples take 3–7 days.

You May Also Like