English
Sloped-shoulder 150 ml aluminium mousse can standing upright, the angled shoulder catching light above a matte printed body, cosmetic facial foam context

150 ml Sloped Shoulder Mousse Can for Facial Cleansing Foam

Small-format foam lines live or die on how the can sits in one hand. A slanted shoulder gives the palm a thumb ledge while the other hand works the actuator, and it cuts a hard break line where body print stops. Buyers sourcing 150 ml trial sizes usually find that break line decides the artwork more than the volume does.

  • Place of originChina
  • Diameter range22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
  • PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
  • Port of loadingGuangzhou / Shenzhen / Ningbo / Shanghai
  • MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
  • Payment termsT/T, L/C, PayPal, Western Union — for your selection
  • Trade termEXW / DAP / DDP

Product Description

Small-format foam lines live or die on how the can sits in one hand. A slanted shoulder gives the palm a thumb ledge while the other hand works the actuator, and it cuts a hard break line where body print stops. Buyers sourcing 150 ml trial sizes usually find that break line decides the artwork more than the volume does.

Key format data: 150 ml nominal capacity. Typical filling applications are cosmetic mousse, facial foam, cleansing foam. Other heights and diameters in the same family can be quoted on request, so the size listed here is a starting point rather than a limit.

This aluminium container is produced in-house from aluminium slug to finished printed can. Body forming, shoulder shaping, internal coating, printing and final inspection all run on the same line, so the wall thickness and pressure performance stay consistent from the first sample to the last pallet of a bulk order.

We supply cans only, or a complete package with valve, actuator and cap selected to match your formulation and filling equipment. Free blank samples are available so your laboratory can confirm pressure, spray rate and compatibility before you commit to tooling or a production run.

Specifications

MaterialAluminium 99.5% (one-piece / monobloc body)
DiameterRecommended based on your requirements
HeightRecommended based on your requirements
Nominal volume / weight150 ml
Neck / valve sizeRecommended based on your requirements
Shoulder shapeSloped shoulder
Recommended contentsCosmetic mousse, facial foam, cleansing foam
Internal coatingFood-grade internal lacquer on request
PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
Surface finishHigh gloss / matte / pearl / metallic lacquer
CapPlastic cap — colour matched to your artwork
PackingCarton + pallet, or as per customer instruction
MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
Lead time15–30 days after sample approval

Final specifications are confirmed against your artwork and filling line before tooling.

Product Features

  • The shoulder is cut at an angle rather than domed, so the transition from body wall to valve cup reads as one straight edge instead of a curve.
  • That edge is where 9-colour direct printing terminates; artwork has to be drawn around the break line instead of bled across it.
  • Label stock conforms to the sloped face with less stretch than a domed shoulder demands, which matters when a wrap covers the upper third of a small can.
  • A 150 ml body leaves little room between base and shoulder, so the printable band is narrow and type is set smaller than on the 200 or 300 ml versions.
  • During dispensing the slope doubles as a thumb rest: the can tips without the fingers sliding up onto the valve cup.
  • Sloped tops will not nest into the base of the can above, so retail trays and shipper cartons need a flat divider between layers.

Application Scenarios

Facial Cleansing Foam

A 150 ml fill suits a wash-off cleanser used over a few weeks; the sloped shoulder keeps the printed product name visible when the can stands in a bathroom cup.

Trial & Gift Sets

Trial packs pair a small foam can with other items in a boxed set; the angled face gives a flat panel for a set-specific label without changing the can tooling.

Hotel & Spa Amenities

Fixed-dose amenity programmes favour 150 ml because the can is replaced on a set schedule; the slope lets a property mark sit above the main artwork.

Counter Display Units

Counter units hold a row of cans at eye level; the angled top means a header card can clip behind the shoulder instead of covering the front print.

Samples & MOQ

Free Blank Samples

Blank cans are supplied free of charge — you only cover the courier cost. Use them to test pressure, spray rate and formulation compatibility.

MOQ 10,000 pcs

Standard MOQ is 10,000 pieces per size and design. Smaller trial quantities can be discussed for a first production run.

Sampling In 3–7 Days

Printed samples typically take 3–7 days. Mass production follows 15–30 days after you approve the pre-production sample.

Customization Options

DiameterStandard range 22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
HeightCustom height from 90 mm to 300 mm (subject to diameter)
Printing1–9 colours offset or silkscreen, plus lacquer and vacuum coating
ValveOne-inch continuous / metered / bag-on-valve, matched to your formulation
CapStandard or custom moulded cap, any colour
SamplesFree blank samples for compatibility testing; printed samples charged

Frequently Asked Questions

Yes. Printing stops at the shoulder break, so the usable band is shorter than on a round-shoulder can of the same volume. Artwork should be built to that boundary from the first proof.

A sleeve follows the slope but gathers where the angle meets the valve cup. Most buyers on this shape choose a body wrap plus a separate shoulder label instead.

The standard 1 inch (25.4 mm) crimp, with cream foam actuators. Crimp depth is set on our line; the customer's actuator is matched to the stem at filling.

10,000 pcs per size and design at standard specification, 20,000 pcs where the print or the can dimensions are bespoke. Blank samples ship in 3–7 days.

You May Also Like