English
200 ml round-shoulder aluminium mousse can photographed at three-quarter angle, unbroken printed wrap over the dome, shaving and bath foam context

200 ml Round Shoulder Mousse Can for Shaving & Bath Foam

Rotary labellers and high-speed print lines prefer a body with no interruption, and a round shoulder is the shape that gives them one. At 200 ml the can is long enough to hold a full ingredient panel around the back and still present a clean front. Ranges that ship in volume usually standardise on this geometry.

  • Place of originChina
  • Diameter range22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
  • PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
  • Port of loadingGuangzhou / Shenzhen / Ningbo / Shanghai
  • MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
  • Payment termsT/T, L/C, PayPal, Western Union — for your selection
  • Trade termEXW / DAP / DDP

Product Description

Rotary labellers and high-speed print lines prefer a body with no interruption, and a round shoulder is the shape that gives them one. At 200 ml the can is long enough to hold a full ingredient panel around the back and still present a clean front. Ranges that ship in volume usually standardise on this geometry.

Key format data: 200 ml nominal capacity. Typical filling applications are cosmetic mousse, facial foam, cleansing foam. Other heights and diameters in the same family can be quoted on request, so the size listed here is a starting point rather than a limit.

This aluminium container is produced in-house from aluminium slug to finished printed can. Body forming, shoulder shaping, internal coating, printing and final inspection all run on the same line, so the wall thickness and pressure performance stay consistent from the first sample to the last pallet of a bulk order.

We supply cans only, or a complete package with valve, actuator and cap selected to match your formulation and filling equipment. Free blank samples are available so your laboratory can confirm pressure, spray rate and compatibility before you commit to tooling or a production run.

Specifications

MaterialAluminium 99.5% (one-piece / monobloc body)
DiameterRecommended based on your requirements
HeightRecommended based on your requirements
Nominal volume / weight200 ml
Neck / valve sizeRecommended based on your requirements
Shoulder shapeRound shoulder
Recommended contentsCosmetic mousse, facial foam, cleansing foam
Internal coatingFood-grade internal lacquer on request
PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
Surface finishHigh gloss / matte / pearl / metallic lacquer
CapPlastic cap — colour matched to your artwork
PackingCarton + pallet, or as per customer instruction
MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
Lead time15–30 days after sample approval

Final specifications are confirmed against your artwork and filling line before tooling.

Product Features

  • A constant radius from base to valve cup lets a rotary labeller index the can without a height change, which keeps line speed steady across a run.
  • Artwork is built as one continuous image, so no shoulder break interrupts a colour gradient or a photographic background running behind the type.
  • The dome resists deformation during crimping because the load spreads around the curve instead of concentrating at an angle.
  • 200 ml is the common denominator in body-foam ranges: large enough for a full ingredient declaration, small enough for a shelf-facing front panel.
  • Foam actuators sit above a dome that traps no product; residue running down the shoulder ends on the body wall and wipes clean.
  • Round cans nest through the base recess, so a shrink-wrapped tray holds a stable block without layer pads between rows.

Application Scenarios

Shaving Foam

Shaving foam is used at a basin with wet hands; a domed 200 ml can has no ledge for lather to collect and rinses clean under the tap.

Bath Range Variants

Multi-SKU ranges print one template in several colourways; the continuous wrap means each variant differs only in ink, not in layout.

Contract Filling

Lines that run several brands on one shift prefer a shape with predictable labelling; the round 200 ml indexes the same way every run.

Supermarket Multipacks

Two- and three-packs are shrink-wrapped on the same line; nesting round cans hold the bundle square and stop the film bridging the gaps between bodies.

Samples & MOQ

Free Blank Samples

Blank cans are supplied free of charge — you only cover the courier cost. Use them to test pressure, spray rate and formulation compatibility.

MOQ 10,000 pcs

Standard MOQ is 10,000 pieces per size and design. Smaller trial quantities can be discussed for a first production run.

Sampling In 3–7 Days

Printed samples typically take 3–7 days. Mass production follows 15–30 days after you approve the pre-production sample.

Customization Options

DiameterStandard range 22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
HeightCustom height from 90 mm to 300 mm (subject to diameter)
Printing1–9 colours offset or silkscreen, plus lacquer and vacuum coating
ValveOne-inch continuous / metered / bag-on-valve, matched to your formulation
CapStandard or custom moulded cap, any colour
SamplesFree blank samples for compatibility testing; printed samples charged

Frequently Asked Questions

Yes, 9-colour direct printing covers body and shoulder as one continuous field, with the artwork joined at a seam the designer sets.

Both are drawn from the same aluminium slug on the same press; the difference is in the die set. Pricing is quoted per shape and volume, not per shoulder style.

The constant radius gives the labeller and star wheel a uniform contact surface, which is why round bodies are the default for long runs.

The 1 inch (25.4 mm) crimp takes the standard foam valve family. Actuator style, dip tube length and overcap are chosen with the fill specification.

You May Also Like