English
150 ml aluminium mousse can with cream foam actuator, dense white foam dispensed onto a gloved finger, formulation trial context

150 ml Foam Mousse Can for Surfactant-Led Foam Development

A foam can is only as good as the balance inside it. The valve and actuator set the expansion; the formula decides whether the foam holds its shape or slumps into liquid on contact. Most 150 ml foam projects fail at that interface, not at the can.

  • Place of originChina
  • Diameter range22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
  • PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
  • Port of loadingGuangzhou / Shenzhen / Ningbo / Shanghai
  • MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
  • Payment termsT/T, L/C, PayPal, Western Union — for your selection
  • Trade termEXW / DAP / DDP

Product Description

A foam can is only as good as the balance inside it. The valve and actuator set the expansion; the formula decides whether the foam holds its shape or slumps into liquid on contact. Most 150 ml foam projects fail at that interface, not at the can.

Key format data: 150 ml nominal capacity. Typical filling applications are cosmetic mousse, facial foam, cleansing foam. Other heights and diameters in the same family can be quoted on request, so the size listed here is a starting point rather than a limit.

This aluminium container is produced in-house from aluminium slug to finished printed can. Body forming, shoulder shaping, internal coating, printing and final inspection all run on the same line, so the wall thickness and pressure performance stay consistent from the first sample to the last pallet of a bulk order.

We supply cans only, or a complete package with valve, actuator and cap selected to match your formulation and filling equipment. Free blank samples are available so your laboratory can confirm pressure, spray rate and compatibility before you commit to tooling or a production run.

Specifications

MaterialAluminium 99.5% (one-piece / monobloc body)
DiameterRecommended based on your requirements
HeightRecommended based on your requirements
Nominal volume / weight150 ml
Neck / valve sizeRecommended based on your requirements
Shoulder shapeRecommended based on your requirements
Recommended contentsCosmetic mousse, facial foam, cleansing foam
Internal coatingFood-grade internal lacquer on request
PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
Surface finishHigh gloss / matte / pearl / metallic lacquer
CapPlastic cap — colour matched to your artwork
PackingCarton + pallet, or as per customer instruction
MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
Lead time15–30 days after sample approval

Final specifications are confirmed against your artwork and filling line before tooling.

Product Features

  • Surfactant level and propellant ratio decide foam density together; change one and an actuator that worked on the trial batch dispenses a wetter or drier foam.
  • The actuator outlet geometry sets how much air folds into the concentrate as it leaves the stem, which is why nozzle and formula are developed as one unit.
  • A 150 ml fill leaves a short dip tube run, so the can needs a smaller shake volume before concentrate and propellant are fully mixed.
  • Aluminium 99.5% drawn as one seamless body gives the formula no side seam to collect residue, which counts when the concentrate is surfactant-heavy.
  • Internal lacquer can be specified where a formula attacks bare aluminium; the choice is made from a fill sample, not from the can drawing.
  • Foam that leaves the nozzle too stiff or too wet usually traces back to propellant share rather than the valve; fill ratio is the first variable to test.

Application Scenarios

Facial Cleansing Foam

A rinse-off cleanser has to foam without running away; the surfactant-to-propellant balance is set so the foam stays on the skin while it is worked.

Hand & Body Foam

Hand foam lands in a wet palm; a denser foam survives the water better than a light one, so the fill ratio is tuned for wet-hand use.

Sample Batches

Trial fills of 150 ml let a brand test three fill ratios on the same actuator before committing to a production order.

Contract Filling Trials

Filling lines prove foam quality on a small run first; the 150 ml body is the least costly way to validate a formula before scaling to 300 ml.

Samples & MOQ

Free Blank Samples

Blank cans are supplied free of charge — you only cover the courier cost. Use them to test pressure, spray rate and formulation compatibility.

MOQ 10,000 pcs

Standard MOQ is 10,000 pieces per size and design. Smaller trial quantities can be discussed for a first production run.

Sampling In 3–7 Days

Printed samples typically take 3–7 days. Mass production follows 15–30 days after you approve the pre-production sample.

Customization Options

DiameterStandard range 22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
HeightCustom height from 90 mm to 300 mm (subject to diameter)
Printing1–9 colours offset or silkscreen, plus lacquer and vacuum coating
ValveOne-inch continuous / metered / bag-on-valve, matched to your formulation
CapStandard or custom moulded cap, any colour
SamplesFree blank samples for compatibility testing; printed samples charged

Frequently Asked Questions

Only partly. The valve and actuator shape the expansion, but density comes from the surfactant and propellant ratio in the fill. Both are set together.

It depends on the concentrate. Surfactant-heavy or acidic formulas are usually tested against a lacquered sample before the order is placed.

Yes. Sample cans are supplied blank for trial fills, with a usual sample lead time of 3–7 days.

20,000 pcs where printing or the can specification is bespoke, 10,000 pcs per size and design at standard specification.

You May Also Like