English
300 ml sloped-shoulder aluminium mousse can held in one hand, thumb resting on the angled shoulder, tall printed body behind, cosmetic cleansing foam context

300 ml Sloped Shoulder Mousse Can for Cleansing & Hair Foam

A 300 ml foam can stays in a shower for months, and it gets handled when it is nearly empty and slippery. The sloped shoulder matters most at that point: it gives the fingers somewhere to sit while the can is tipped, and the body below it carries print that has to survive the whole cycle.

  • Place of originChina
  • Diameter range22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
  • PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
  • Port of loadingGuangzhou / Shenzhen / Ningbo / Shanghai
  • MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
  • Payment termsT/T, L/C, PayPal, Western Union — for your selection
  • Trade termEXW / DAP / DDP

Product Description

A 300 ml foam can stays in a shower for months, and it gets handled when it is nearly empty and slippery. The sloped shoulder matters most at that point: it gives the fingers somewhere to sit while the can is tipped, and the body below it carries print that has to survive the whole cycle.

Key format data: 300 ml nominal capacity. Typical filling applications are cosmetic mousse, facial foam, cleansing foam. Other heights and diameters in the same family can be quoted on request, so the size listed here is a starting point rather than a limit.

This aluminium container is produced in-house from aluminium slug to finished printed can. Body forming, shoulder shaping, internal coating, printing and final inspection all run on the same line, so the wall thickness and pressure performance stay consistent from the first sample to the last pallet of a bulk order.

We supply cans only, or a complete package with valve, actuator and cap selected to match your formulation and filling equipment. Free blank samples are available so your laboratory can confirm pressure, spray rate and compatibility before you commit to tooling or a production run.

Specifications

MaterialAluminium 99.5% (one-piece / monobloc body)
DiameterRecommended based on your requirements
HeightRecommended based on your requirements
Nominal volume / weight300 ml
Neck / valve sizeRecommended based on your requirements
Shoulder shapeSloped shoulder
Recommended contentsCosmetic mousse, facial foam, cleansing foam
Internal coatingFood-grade internal lacquer on request
PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
Surface finishHigh gloss / matte / pearl / metallic lacquer
CapPlastic cap — colour matched to your artwork
PackingCarton + pallet, or as per customer instruction
MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
Lead time15–30 days after sample approval

Final specifications are confirmed against your artwork and filling line before tooling.

Product Features

  • The angled face is a natural grip point when the can is inverted near the end of its fill; the hand closes on the slope rather than the smooth wall.
  • Longer bodies mean longer print repeats; a 300 ml layout usually carries two or three graphic bands, and the slope sets where the top band stops.
  • Because the top will not nest into another can's base, pallets for this shape are built with layer pads between tiers.
  • Wall thickness is drawn thinner in proportion to height, so on a 300 ml body the base rim is where dents appear first, not the shoulder.
  • Residue from a foam actuator runs down the slope and off the edge instead of pooling around the valve cup, keeping the crimp area clean.
  • A larger fill spreads valve and actuator cost across more product, so the 300 ml pack carries a lower component share of unit cost than a 150 ml.

Application Scenarios

Family Shower Foam

A 300 ml can serves a household for weeks; stored on a shelf with the slope facing out, the mark stays readable between uses.

Cleansing & Hair Foam

One can type can run a cleansing foam and a hair foam when the fill and actuator change; the 300 ml body has room for a dual-language panel.

Salon & Clinic Supply

High-use settings replace cans on a schedule; the larger fill cuts the number of swaps per station over a working week.

Bulk Retail Cartons

Shipper cartons for 300 ml hold fewer units per layer than the 200 ml, so freight planning should start from carton count, not can count.

Samples & MOQ

Free Blank Samples

Blank cans are supplied free of charge — you only cover the courier cost. Use them to test pressure, spray rate and formulation compatibility.

MOQ 10,000 pcs

Standard MOQ is 10,000 pieces per size and design. Smaller trial quantities can be discussed for a first production run.

Sampling In 3–7 Days

Printed samples typically take 3–7 days. Mass production follows 15–30 days after you approve the pre-production sample.

Customization Options

DiameterStandard range 22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
HeightCustom height from 90 mm to 300 mm (subject to diameter)
Printing1–9 colours offset or silkscreen, plus lacquer and vacuum coating
ValveOne-inch continuous / metered / bag-on-valve, matched to your formulation
CapStandard or custom moulded cap, any colour
SamplesFree blank samples for compatibility testing; printed samples charged

Frequently Asked Questions

The angled top leaves a gap under the base of the can above. Layer pads bridge that gap so the stack does not shift in transit.

Height increases the lever arm at the base, so carton fit and layer support matter more here than on a 150 ml can.

The layout has to be redrawn. Print repeats scale with body length, and the sloped break line sits at a different height on each volume.

15–30 days after samples are signed off. Samples, including blanks before tooling, take 3–7 days.

You May Also Like