English
80 ml BOV aluminium aerosol can, Φ40 × 120 mm, wider Φ40 body turned so the printed wrap area faces the camera

80 ml BOV Aerosol Can for Facial Mist & Promotional Packs, Φ40 × 120 mm

A Φ40 × 120 mm body with 80 ml of fill — the size that gives a promotional pack or a gift-with-purchase enough product to be used properly, on a can with more print area than the Φ35 formats.

  • Place of originChina
  • Diameter range22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
  • PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
  • Port of loadingGuangzhou / Shenzhen / Ningbo / Shanghai
  • MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
  • Payment termsT/T, L/C, PayPal, Western Union — for your selection
  • Trade termEXW / DAP / DDP

Product Description

A Φ40 × 120 mm body with 80 ml of fill — the size that gives a promotional pack or a gift-with-purchase enough product to be used properly, on a can with more print area than the Φ35 formats.

Key format data: Φ40 mm diameter and 120 mm overall height; 80 ml nominal capacity. Typical filling applications are facial mist, toner, promotional and small body-care formulations. Other heights and diameters in the same family can be quoted on request, so the size listed here is a starting point rather than a limit.

This Φ40 mm diameter aluminium container is produced in-house from aluminium slug to finished printed can. Body forming, shoulder shaping, internal coating, printing and final inspection all run on the same line, so the wall thickness and pressure performance stay consistent from the first sample to the last pallet of a bulk order.

We supply cans only, or a complete package with valve, actuator and cap selected to match your formulation and filling equipment. Free blank samples are available so your laboratory can confirm pressure, spray rate and compatibility before you commit to tooling or a production run.

Specifications

MaterialAluminium 99.5% (one-piece / monobloc body)
DiameterΦ40 mm
Height120 mm
Nominal volume / weight80 ml
Neck / valve sizeRecommended based on your requirements
Shoulder shapeRecommended based on your requirements
Recommended contentsFacial mist, toner, promotional and small body-care formulations
Internal coatingFood-grade internal lacquer on request
PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
Surface finishHigh gloss / matte / pearl / metallic lacquer
CapPlastic cap — colour matched to your artwork
PackingCarton + pallet, or as per customer instruction
MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
Lead time15–30 days after sample approval

Final specifications are confirmed against your artwork and filling line before tooling.

Product Features

  • Φ40 mm body — 5 mm wider than the Φ35 sizes, roughly 14% more circumference for artwork, ingredient text and barcode
  • 80 ml is the usual gift-with-purchase fill: enough product for a real trial, small enough to hand out at scale
  • Facial mist, toner and setting spray are the natural fills at this volume, where a fine continuous mist beats a pump
  • Bag 100 × 80 × 25 mm is matched to the Φ40 body, so the can is not over-sized for its fill
  • Promotional work is where colour matters: body lacquer, print and cap are matched to one colour target rather than three separate ones
  • One-piece seamless body — a fine mist format shows every defect in the wall finish, so there is nowhere for a seam to hide

Application Scenarios

Facial mist & toner

Hydrating and setting mists where droplet size decides whether the product feels like skin care or a wet face.

Promotional & gift-with-purchase

Campaign packs and sampling bundles tied to a launch or a retail promotion.

Deodorant & body minis

Small body-care formats sold in sets or as add-on items at the till.

Hair & scalp treatments

Light leave-in mists that need an even, low-output spray.

Samples & MOQ

Free Blank Samples

Blank cans are supplied free of charge — you only cover the courier cost. Use them to test pressure, spray rate and formulation compatibility.

MOQ 10,000 pcs

Standard MOQ is 10,000 pieces per size and design. Smaller trial quantities can be discussed for a first production run.

Sampling In 3–7 Days

Printed samples typically take 3–7 days. Mass production follows 15–30 days after you approve the pre-production sample.

Customization Options

DiameterStandard range 22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
HeightCustom height from 90 mm to 300 mm (subject to diameter)
Printing1–9 colours offset or silkscreen, plus lacquer and vacuum coating
ValveOne-inch continuous / metered / bag-on-valve, matched to your formulation
CapStandard or custom moulded cap, any colour
SamplesFree blank samples for compatibility testing; printed samples charged

Frequently Asked Questions

10,000 pieces per size and design. Custom printing plates, bespoke colour matching or a new bag size take the minimum to 20,000 pieces.

Two reasons: fill cost and shelf depth. If the can is a giveaway, 80 ml cuts the fill without looking like a token sample. If it is a retail SKU, the Φ40 body is narrower than Φ45 and takes less shelf depth.

Yes, and for promotional work that is usually the point. Send the target colour references and we match body, print and cap to them as a set.

Sampling 3–7 days, mass production 15–30 days after you approve the pre-production sample. Promotional deadlines are tight, so give us the on-shelf date when you enquire.

You May Also Like