125 ml BOV Aerosol Can for Hair Spray & Dry Shampoo, Φ45 × 150 mm
The same Φ45 mm neck as the 100 ml, 25 mm taller and 25% more fill — the format hair spray and dry shampoo are specified in, where a single use discharges far more product than a facial mist.
- Place of originChina
- Diameter range22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
- PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
- Port of loadingGuangzhou / Shenzhen / Ningbo / Shanghai
- MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
- Payment termsT/T, L/C, PayPal, Western Union — for your selection
- Trade termEXW / DAP / DDP
Product Description
The same Φ45 mm neck as the 100 ml, 25 mm taller and 25% more fill — the format hair spray and dry shampoo are specified in, where a single use discharges far more product than a facial mist.
Key format data: Φ45 mm diameter and 150 mm overall height; 125 ml nominal capacity. Typical filling applications are hair spray, dry shampoo, body and linen mist formulations. Other heights and diameters in the same family can be quoted on request, so the size listed here is a starting point rather than a limit.
This Φ45 mm diameter aluminium container is produced in-house from aluminium slug to finished printed can. Body forming, shoulder shaping, internal coating, printing and final inspection all run on the same line, so the wall thickness and pressure performance stay consistent from the first sample to the last pallet of a bulk order.
We supply cans only, or a complete package with valve, actuator and cap selected to match your formulation and filling equipment. Free blank samples are available so your laboratory can confirm pressure, spray rate and compatibility before you commit to tooling or a production run.
Specifications
| Material | Aluminium 99.5% (one-piece / monobloc body) |
|---|---|
| Diameter | Φ45 mm |
| Height | 150 mm |
| Nominal volume / weight | 125 ml |
| Neck / valve size | Recommended based on your requirements |
| Shoulder shape | Recommended based on your requirements |
| Recommended contents | Hair spray, dry shampoo, body and linen mist formulations |
| Internal coating | Food-grade internal lacquer on request |
| Printing | Up to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating |
| Surface finish | High gloss / matte / pearl / metallic lacquer |
| Cap | Plastic cap — colour matched to your artwork |
| Packing | Carton + pallet, or as per customer instruction |
| MOQ | 10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications |
| Lead time | 15–30 days after sample approval |
Final specifications are confirmed against your artwork and filling line before tooling.
Product Features
- 25% more fill than the 100 ml on the same Φ45 mm neck — one set of change parts covers both SKUs
- Hair spray and dry shampoo discharge several times the volume per use of a facial mist, which is what makes 125 ml the practical size
- Bag 125 × 90 × 25 mm, matched to the taller body so the can is not half empty at the end of the run
- Styling products often carry an alcohol or resin load that attacks a can wall — inside the bag the formulation never touches it
- Salon and retail can share one can: the 125 ml body height fits standard salon shelf depths
- Full-body direct print, so front and back panels carry brand, directions and warnings without a label
Application Scenarios
Hair spray & styling
Finishing sprays and setting products where the dose per use is high.
Dry shampoo
Powder-in-spray formats that need a strong, even discharge without clogging.
Body & linen mist
Larger-format body sprays and home fragrance for repeat daily use.
Salon & professional
Back-bar and retail sizes matched to a salon house standard.
Samples & MOQ
Free Blank Samples
Blank cans are supplied free of charge — you only cover the courier cost. Use them to test pressure, spray rate and formulation compatibility.
MOQ 10,000 pcs
Standard MOQ is 10,000 pieces per size and design. Smaller trial quantities can be discussed for a first production run.
Sampling In 3–7 Days
Printed samples typically take 3–7 days. Mass production follows 15–30 days after you approve the pre-production sample.
Customization Options
| Diameter | Standard range 22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm |
|---|---|
| Height | Custom height from 90 mm to 300 mm (subject to diameter) |
| Printing | 1–9 colours offset or silkscreen, plus lacquer and vacuum coating |
| Valve | One-inch continuous / metered / bag-on-valve, matched to your formulation |
| Cap | Standard or custom moulded cap, any colour |
| Samples | Free blank samples for compatibility testing; printed samples charged |
Frequently Asked Questions
10,000 pieces per size and design on standard specification; 20,000 pieces for custom plates, bespoke colour or a new bag dimension.
No. The body is the same Φ45 mm, only taller, so the added cost is the extra aluminium and the larger bag rather than a new tool. That is why the 100 ml and 125 ml pair is the usual way to cover a hair care range.
Yes, and it is one of the better fits for the format: the starch stays sealed in the bag, so it cannot cake around the valve stem the way it does in a conventional can.
3–7 days for sampling, 15–30 days for mass production after sample approval, depending on quantity and how many print colours are involved.
You May Also Like
-
30 ml BOV Aerosol Can for Sample & Travel Sizes, Φ35 × 90 mm
30 ml · Φ35 × 90 mm can · BOV bag 60 × 65 × 25 mm
-
50 ml BOV Aerosol Can for Hand Sanitiser & Travel Kits, Φ35 × 110 mm
50 ml · Φ35 × 110 mm can · BOV bag 90 × 65 × 25 mm
-
80 ml BOV Aerosol Can for Facial Mist & Promotional Packs, Φ40 × 120 mm
80 ml · Φ40 × 120 mm can · BOV bag 100 × 80 × 25 mm