English
50 ml BOV aluminium aerosol can, Φ35 × 110 mm, pocket-size body with the actuator off to show the 1-inch crimp

50 ml BOV Aerosol Can for Hand Sanitiser & Travel Kits, Φ35 × 110 mm

The same Φ35 mm footprint as the 30 ml, 20 mm taller and holding 50 ml — the pocket size that clears the 100 ml cabin limit with room left for a full course of use.

  • Place of originChina
  • Diameter range22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
  • PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
  • Port of loadingGuangzhou / Shenzhen / Ningbo / Shanghai
  • MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
  • Payment termsT/T, L/C, PayPal, Western Union — for your selection
  • Trade termEXW / DAP / DDP

Product Description

The same Φ35 mm footprint as the 30 ml, 20 mm taller and holding 50 ml — the pocket size that clears the 100 ml cabin limit with room left for a full course of use.

Key format data: Φ35 mm diameter and 110 mm overall height; 50 ml nominal capacity. Typical filling applications are hand sanitiser, travel personal care and pocket spray formulations. Other heights and diameters in the same family can be quoted on request, so the size listed here is a starting point rather than a limit.

This Φ35 mm diameter aluminium container is produced in-house from aluminium slug to finished printed can. Body forming, shoulder shaping, internal coating, printing and final inspection all run on the same line, so the wall thickness and pressure performance stay consistent from the first sample to the last pallet of a bulk order.

We supply cans only, or a complete package with valve, actuator and cap selected to match your formulation and filling equipment. Free blank samples are available so your laboratory can confirm pressure, spray rate and compatibility before you commit to tooling or a production run.

Specifications

MaterialAluminium 99.5% (one-piece / monobloc body)
DiameterΦ35 mm
Height110 mm
Nominal volume / weight50 ml
Neck / valve sizeRecommended based on your requirements
Shoulder shapeRecommended based on your requirements
Recommended contentsHand sanitiser, travel personal care and pocket spray formulations
Internal coatingFood-grade internal lacquer on request
PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
Surface finishHigh gloss / matte / pearl / metallic lacquer
CapPlastic cap — colour matched to your artwork
PackingCarton + pallet, or as per customer instruction
MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
Lead time15–30 days after sample approval

Final specifications are confirmed against your artwork and filling line before tooling.

Product Features

  • 50 ml in a Φ35 × 110 mm can — handbag size that clears the 100 ml cabin-bag limit with room to spare
  • Keeps the Φ35 mm diameter of the 30 ml, so one set of change parts covers both sizes on the same line
  • Hand sanitiser, pocket spray and travel personal care are the volume applications at this size, and all three have to survive a checked bag
  • Bag 90 × 65 × 25 mm gives the extra 20 ml without changing the can neck or the valve
  • Alcohol-based fills are the reason BOV suits this size: the formulation stays inside the bag and never mixes with the propellant
  • Direct print on the whole body — travel retail and hotel channels need brand and regulatory text on the can, not on a sticker

Application Scenarios

Hand hygiene

Alcohol gel and sanitiser sprays for retail, hospitality and transport channels.

Travel personal care

Cabin-size mists, deodorants and hair care that have to survive baggage handling.

Pocket & purse formats

On-the-go refreshers sold at counter tills and in travel retail.

Hotel & amenity

Guest amenity and turndown sizes matched to a house standard.

Samples & MOQ

Free Blank Samples

Blank cans are supplied free of charge — you only cover the courier cost. Use them to test pressure, spray rate and formulation compatibility.

MOQ 10,000 pcs

Standard MOQ is 10,000 pieces per size and design. Smaller trial quantities can be discussed for a first production run.

Sampling In 3–7 Days

Printed samples typically take 3–7 days. Mass production follows 15–30 days after you approve the pre-production sample.

Customization Options

DiameterStandard range 22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
HeightCustom height from 90 mm to 300 mm (subject to diameter)
Printing1–9 colours offset or silkscreen, plus lacquer and vacuum coating
ValveOne-inch continuous / metered / bag-on-valve, matched to your formulation
CapStandard or custom moulded cap, any colour
SamplesFree blank samples for compatibility testing; printed samples charged

Frequently Asked Questions

10,000 pieces per size and design as standard; 20,000 pieces where the run needs custom printing plates, bespoke colour or a new bag dimension.

Yes. Both are Φ35 mm cans on the same one-inch valve family, so a filler running a 30 ml and a 50 ml SKU only changes the height setting.

It is the reason most sanitiser brands move to BOV. The formulation stays inside the bag and never contacts the propellant or the can wall, so the alcohol concentration you fill is the concentration the user sprays.

Yes. Can, bag and valve are supplied as one matched set, which is what keeps a 50 ml fill accurate on a high-speed line.

You May Also Like