English
30 ml BOV aluminium aerosol can, Φ35 × 90 mm, seamless one-piece body upright with the bag valve crimped and clear cap fitted

30 ml BOV Aerosol Can for Sample & Travel Sizes, Φ35 × 90 mm

A 30 ml one-piece aluminium can with a 60 × 65 × 25 mm bag inside — built for sample programs, travel kits and small-dose formats where the fill is expensive and the can still has to look like retail packaging.

  • Place of originChina
  • Diameter range22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
  • PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
  • Port of loadingGuangzhou / Shenzhen / Ningbo / Shanghai
  • MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
  • Payment termsT/T, L/C, PayPal, Western Union — for your selection
  • Trade termEXW / DAP / DDP

Product Description

A 30 ml one-piece aluminium can with a 60 × 65 × 25 mm bag inside — built for sample programs, travel kits and small-dose formats where the fill is expensive and the can still has to look like retail packaging.

Key format data: Φ35 mm diameter and 90 mm overall height; 30 ml nominal capacity. Typical filling applications are sample, travel, otc nasal and concentrated serum formulations. Other heights and diameters in the same family can be quoted on request, so the size listed here is a starting point rather than a limit.

This Φ35 mm diameter aluminium container is produced in-house from aluminium slug to finished printed can. Body forming, shoulder shaping, internal coating, printing and final inspection all run on the same line, so the wall thickness and pressure performance stay consistent from the first sample to the last pallet of a bulk order.

We supply cans only, or a complete package with valve, actuator and cap selected to match your formulation and filling equipment. Free blank samples are available so your laboratory can confirm pressure, spray rate and compatibility before you commit to tooling or a production run.

Specifications

MaterialAluminium 99.5% (one-piece / monobloc body)
DiameterΦ35 mm
Height90 mm
Nominal volume / weight30 ml
Neck / valve sizeRecommended based on your requirements
Shoulder shapeRecommended based on your requirements
Recommended contentsSample, travel, OTC nasal and concentrated serum formulations
Internal coatingFood-grade internal lacquer on request
PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
Surface finishHigh gloss / matte / pearl / metallic lacquer
CapPlastic cap — colour matched to your artwork
PackingCarton + pallet, or as per customer instruction
MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
Lead time15–30 days after sample approval

Final specifications are confirmed against your artwork and filling line before tooling.

Product Features

  • Smallest format we run — a 30 ml fill in a Φ35 × 90 mm can that fits sample cards, airline amenity kits and hotel amenity trays
  • Light to ship: a thousand 30 ml cans occupy a fraction of the carton volume of the same quantity at 200 ml, which is what makes sample programs affordable
  • Metered valve available, and at this fill size it is usually the right choice because a continuous spray empties 30 ml in a few seconds
  • Bag size 60 × 65 × 25 mm is matched to the can in our own assembly, so your filler receives one set instead of sourcing can and bag separately
  • A 30 ml can has a high surface-to-volume ratio, so the seam-free one-piece body matters more here than at any larger size
  • Print runs the full 360° of the body — a 30 ml sample carries the same brand presence as your retail can

Application Scenarios

Sample & trial programs

Pre-filled samples and tester cans for launch campaigns, built to survive post and hand-out without denting.

Travel & hotel amenity

Amenity kits and cabin-friendly sizes for hotel, airline and gym channels.

OTC nasal & topical

Small-dose pharmacy formats that need a metered valve and a clean product path.

Concentrated serums & actives

High-value formulations where fill cost dominates and the pack only has to deliver a few hundred sprays.

Samples & MOQ

Free Blank Samples

Blank cans are supplied free of charge — you only cover the courier cost. Use them to test pressure, spray rate and formulation compatibility.

MOQ 10,000 pcs

Standard MOQ is 10,000 pieces per size and design. Smaller trial quantities can be discussed for a first production run.

Sampling In 3–7 Days

Printed samples typically take 3–7 days. Mass production follows 15–30 days after you approve the pre-production sample.

Customization Options

DiameterStandard range 22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
HeightCustom height from 90 mm to 300 mm (subject to diameter)
Printing1–9 colours offset or silkscreen, plus lacquer and vacuum coating
ValveOne-inch continuous / metered / bag-on-valve, matched to your formulation
CapStandard or custom moulded cap, any colour
SamplesFree blank samples for compatibility testing; printed samples charged

Frequently Asked Questions

10,000 pieces per size and design on the standard specification. Custom printing plates, bespoke colour matching or a new bag dimension raise the minimum to 20,000 pieces.

It uses the same one-inch valve family, but the body is Φ35 mm instead of Φ45–66 mm, so the line needs a diameter change part. Tell us which filler you run and we will confirm the change parts before you commit.

Yes, and at 30 ml it is the usual specification. An uncontrolled continuous spray would empty the can in a few seconds, which is not what a nasal or serum product needs.

Carton and pallet, with the bag and valve already assembled inside the can. Give us the pallet footprint your warehouse uses and we pack to it.

You May Also Like