English
500 ml BOV aluminium aerosol can, Φ66 × 240 mm, largest body in the range shown with an extension-tube nozzle

500 ml BOV Aerosol Can for Industrial & Disinfection Use, Φ66 × 240 mm

The largest format we run: 500 ml in a Φ66 × 240 mm can with a 213 × 115 × 35 mm bag, built for professional and industrial fills where the can is a tool rather than a retail pack.

  • Place of originChina
  • Diameter range22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
  • PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
  • Port of loadingGuangzhou / Shenzhen / Ningbo / Shanghai
  • MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
  • Payment termsT/T, L/C, PayPal, Western Union — for your selection
  • Trade termEXW / DAP / DDP

Product Description

The largest format we run: 500 ml in a Φ66 × 240 mm can with a 213 × 115 × 35 mm bag, built for professional and industrial fills where the can is a tool rather than a retail pack.

Key format data: Φ66 mm diameter and 240 mm overall height; 500 ml nominal capacity. Typical filling applications are industrial, disinfection, coating and automotive formulations. Other heights and diameters in the same family can be quoted on request, so the size listed here is a starting point rather than a limit.

This Φ66 mm diameter aluminium container is produced in-house from aluminium slug to finished printed can. Body forming, shoulder shaping, internal coating, printing and final inspection all run on the same line, so the wall thickness and pressure performance stay consistent from the first sample to the last pallet of a bulk order.

We supply cans only, or a complete package with valve, actuator and cap selected to match your formulation and filling equipment. Free blank samples are available so your laboratory can confirm pressure, spray rate and compatibility before you commit to tooling or a production run.

Specifications

MaterialAluminium 99.5% (one-piece / monobloc body)
DiameterΦ66 mm
Height240 mm
Nominal volume / weight500 ml
Neck / valve sizeRecommended based on your requirements
Shoulder shapeRecommended based on your requirements
Recommended contentsIndustrial, disinfection, coating and automotive formulations
Internal coatingFood-grade internal lacquer on request
PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
Surface finishHigh gloss / matte / pearl / metallic lacquer
CapPlastic cap — colour matched to your artwork
PackingCarton + pallet, or as per customer instruction
MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
Lead time15–30 days after sample approval

Final specifications are confirmed against your artwork and filling line before tooling.

Product Features

  • Largest BOV format we supply — 500 ml in Φ66 × 240 mm, for fills where stopping to change a can mid-job is not an option
  • 35 mm bag depth, the deepest in the range, so high-viscosity technical products discharge without starving the valve
  • Professional channels buy on output per can rather than shelf presence, and 500 ml cuts the number of changes per shift
  • Disinfectants and solvent-based technical fills are aggressive to a can wall — inside the bag the formulation never reaches it
  • Φ66 mm body takes the widest actuator range, including fan, jet and extension-tube nozzles
  • Pressure and burst tested batch by batch in-house, which matters most at 500 ml because the stored energy is highest

Application Scenarios

Industrial lubricants & release agents

Workshop and production-line fills dispensed in volume.

Disinfectants & sanitisers

Professional hygiene products where the active must not meet the propellant.

Coatings & adhesives

Technical sprays that need a 35 mm bag to flow at all.

Automotive & maintenance

Service-bay products sized to a working shift rather than a retail shelf.

Samples & MOQ

Free Blank Samples

Blank cans are supplied free of charge — you only cover the courier cost. Use them to test pressure, spray rate and formulation compatibility.

MOQ 10,000 pcs

Standard MOQ is 10,000 pieces per size and design. Smaller trial quantities can be discussed for a first production run.

Sampling In 3–7 Days

Printed samples typically take 3–7 days. Mass production follows 15–30 days after you approve the pre-production sample.

Customization Options

DiameterStandard range 22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
HeightCustom height from 90 mm to 300 mm (subject to diameter)
Printing1–9 colours offset or silkscreen, plus lacquer and vacuum coating
ValveOne-inch continuous / metered / bag-on-valve, matched to your formulation
CapStandard or custom moulded cap, any colour
SamplesFree blank samples for compatibility testing; printed samples charged

Frequently Asked Questions

10,000 pieces per size and design as standard; 20,000 pieces where custom printing, bespoke colour or a new bag dimension is required.

Not primarily. At 500 ml the can is a professional tool: the economics work when a workshop or a cleaning contractor buys output per can. For retail body care the 200 ml and 300 ml formats are the usual choice.

That depends on the bag and valve elastomers rather than the aluminium, because the fill never touches the can wall. Send the solvent and its concentration and we confirm the bag material before you commit.

3–7 days for sampling, 15–30 days for mass production after sample approval. Large 500 ml runs are quoted together with the shipment plan.

You May Also Like