300 ml BOV Aerosol Can for Continuous Spray & Body Sun Care, Φ59 × 215 mm
A Φ59 × 215 mm can with a 180 × 100 × 32 mm bag — the size for continuous-spray body formats, where the user expects to cover an arm or a back in one pass and a 100 ml fill would run out mid-application.
- Place of originChina
- Diameter range22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
- PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
- Port of loadingGuangzhou / Shenzhen / Ningbo / Shanghai
- MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
- Payment termsT/T, L/C, PayPal, Western Union — for your selection
- Trade termEXW / DAP / DDP
Product Description
A Φ59 × 215 mm can with a 180 × 100 × 32 mm bag — the size for continuous-spray body formats, where the user expects to cover an arm or a back in one pass and a 100 ml fill would run out mid-application.
Key format data: Φ59 mm diameter and 215 mm overall height; 300 ml nominal capacity. Typical filling applications are continuous body spray, family sun care and household formulations. Other heights and diameters in the same family can be quoted on request, so the size listed here is a starting point rather than a limit.
This Φ59 mm diameter aluminium container is produced in-house from aluminium slug to finished printed can. Body forming, shoulder shaping, internal coating, printing and final inspection all run on the same line, so the wall thickness and pressure performance stay consistent from the first sample to the last pallet of a bulk order.
We supply cans only, or a complete package with valve, actuator and cap selected to match your formulation and filling equipment. Free blank samples are available so your laboratory can confirm pressure, spray rate and compatibility before you commit to tooling or a production run.
Specifications
| Material | Aluminium 99.5% (one-piece / monobloc body) |
|---|---|
| Diameter | Φ59 mm |
| Height | 215 mm |
| Nominal volume / weight | 300 ml |
| Neck / valve size | Recommended based on your requirements |
| Shoulder shape | Recommended based on your requirements |
| Recommended contents | Continuous body spray, family sun care and household formulations |
| Internal coating | Food-grade internal lacquer on request |
| Printing | Up to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating |
| Surface finish | High gloss / matte / pearl / metallic lacquer |
| Cap | Plastic cap — colour matched to your artwork |
| Packing | Carton + pallet, or as per customer instruction |
| MOQ | 10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications |
| Lead time | 15–30 days after sample approval |
Final specifications are confirmed against your artwork and filling line before tooling.
Product Features
- Built for continuous spray: at 300 ml the can sustains a long, uninterrupted discharge that a 100 ml format cannot
- Φ59 mm body gives the largest print panel in the cosmetic range, which is what body-care front-of-pack artwork needs
- Bag 180 × 100 × 32 mm — the 32 mm depth handles both low-viscosity sprays and thicker sun lotions
- Family and body sizes are where BOV pays for itself: with no propellant in the product, the whole fill is usable product
- One-piece body, pressure and burst tested batch by batch, because a 300 ml fill stores more energy than a 100 ml one
- Valve, actuator and cap are specified as one set against the fill, not sourced separately and hoped to work together
Application Scenarios
Continuous body spray
Body and sun formats applied over a large area in a single pass.
Family sun care
Larger SPF sizes sold for household and beach use.
Household & air care
Room sprays and fabric refreshers that need a long, even throw.
Pet care
Larger-format coat and grooming sprays.
Samples & MOQ
Free Blank Samples
Blank cans are supplied free of charge — you only cover the courier cost. Use them to test pressure, spray rate and formulation compatibility.
MOQ 10,000 pcs
Standard MOQ is 10,000 pieces per size and design. Smaller trial quantities can be discussed for a first production run.
Sampling In 3–7 Days
Printed samples typically take 3–7 days. Mass production follows 15–30 days after you approve the pre-production sample.
Customization Options
| Diameter | Standard range 22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm |
|---|---|
| Height | Custom height from 90 mm to 300 mm (subject to diameter) |
| Printing | 1–9 colours offset or silkscreen, plus lacquer and vacuum coating |
| Valve | One-inch continuous / metered / bag-on-valve, matched to your formulation |
| Cap | Standard or custom moulded cap, any colour |
| Samples | Free blank samples for compatibility testing; printed samples charged |
Frequently Asked Questions
10,000 pieces per size and design on the standard specification; 20,000 pieces when custom printing plates, bespoke colour matching or a new bag dimension are needed.
Because both the fill volume and the discharge rate go up. A 25 mm bag would restrict flow on a continuous-spray valve and the spray would fade as the can empties.
Yes. The Φ59 mm neck takes the full one-inch valve range, including foam, metered and continuous spray. The valve has to be matched to the bag and the fill, so send the formulation with the enquiry.
3–7 days for sampling, 15–30 days for mass production after you approve the pre-production sample.
You May Also Like
-
30 ml BOV Aerosol Can for Sample & Travel Sizes, Φ35 × 90 mm
30 ml · Φ35 × 90 mm can · BOV bag 60 × 65 × 25 mm
-
50 ml BOV Aerosol Can for Hand Sanitiser & Travel Kits, Φ35 × 110 mm
50 ml · Φ35 × 110 mm can · BOV bag 90 × 65 × 25 mm
-
80 ml BOV Aerosol Can for Facial Mist & Promotional Packs, Φ40 × 120 mm
80 ml · Φ40 × 120 mm can · BOV bag 100 × 80 × 25 mm