English
200 ml food-grade BOV aluminium aerosol can, Φ53 × 180 mm, wide body with the 32 mm bag valve visible at the neck

200 ml Food-Grade BOV Aerosol Can for Cooking Oil Spray, Φ53 × 180 mm

A Φ53 × 180 mm can with a 145 × 100 × 32 mm bag — the size where food fills start to make sense, because a cooking or release spray needs enough volume per use to coat a pan, and a 32 mm bag depth that copes with viscosity.

  • Place of originChina
  • Diameter range22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
  • PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
  • Port of loadingGuangzhou / Shenzhen / Ningbo / Shanghai
  • MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
  • Payment termsT/T, L/C, PayPal, Western Union — for your selection
  • Trade termEXW / DAP / DDP

Product Description

A Φ53 × 180 mm can with a 145 × 100 × 32 mm bag — the size where food fills start to make sense, because a cooking or release spray needs enough volume per use to coat a pan, and a 32 mm bag depth that copes with viscosity.

Key format data: Φ53 mm diameter and 180 mm overall height; 200 ml nominal capacity. Typical filling applications are cooking oil, culinary sauce and food-grade gel formulations. Other heights and diameters in the same family can be quoted on request, so the size listed here is a starting point rather than a limit.

This Φ53 mm diameter aluminium container is produced in-house from aluminium slug to finished printed can. Body forming, shoulder shaping, internal coating, printing and final inspection all run on the same line, so the wall thickness and pressure performance stay consistent from the first sample to the last pallet of a bulk order.

We supply cans only, or a complete package with valve, actuator and cap selected to match your formulation and filling equipment. Free blank samples are available so your laboratory can confirm pressure, spray rate and compatibility before you commit to tooling or a production run.

Specifications

MaterialAluminium 99.5% (one-piece / monobloc body)
DiameterΦ53 mm
Height180 mm
Nominal volume / weight200 ml
Neck / valve sizeRecommended based on your requirements
Shoulder shapeRecommended based on your requirements
Recommended contentsCooking oil, culinary sauce and food-grade gel formulations
Internal coatingFood-grade internal lacquer on request
PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
Surface finishHigh gloss / matte / pearl / metallic lacquer
CapPlastic cap — colour matched to your artwork
PackingCarton + pallet, or as per customer instruction
MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
Lead time15–30 days after sample approval

Final specifications are confirmed against your artwork and filling line before tooling.

Product Features

  • 32 mm bag depth rather than 25 mm — the extra depth is what lets a viscous oil or sauce discharge cleanly instead of starving the valve
  • Food-grade internal lacquer on request, so the fill only ever contacts the bag and the lacquer, never the aluminium wall
  • 200 ml is the working size for cooking spray: enough for a pan or a tray, small enough to hold one-handed
  • BOV takes the propellant out of the food path entirely — no propellant taste and no separate barrier pack needed
  • Φ53 mm body takes the full one-inch valve range, including foam and continuous spray
  • Direct print built for kitchen use, where the can sits next to heat and steam

Application Scenarios

Cooking & olive oil spray

Portion-controlled oil sprays for home and food-service kitchens.

Sauces & dressings

Viscous culinary fills that need a 32 mm bag to flow at all.

Bakery release

Release agents for tins and trays, where an even film matters more than volume.

Pharmaceutical gels

Topical gels and food-grade medical formats on the same body.

Samples & MOQ

Free Blank Samples

Blank cans are supplied free of charge — you only cover the courier cost. Use them to test pressure, spray rate and formulation compatibility.

MOQ 10,000 pcs

Standard MOQ is 10,000 pieces per size and design. Smaller trial quantities can be discussed for a first production run.

Sampling In 3–7 Days

Printed samples typically take 3–7 days. Mass production follows 15–30 days after you approve the pre-production sample.

Customization Options

DiameterStandard range 22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
HeightCustom height from 90 mm to 300 mm (subject to diameter)
Printing1–9 colours offset or silkscreen, plus lacquer and vacuum coating
ValveOne-inch continuous / metered / bag-on-valve, matched to your formulation
CapStandard or custom moulded cap, any colour
SamplesFree blank samples for compatibility testing; printed samples charged

Frequently Asked Questions

10,000 pieces per size and design as standard; 20,000 pieces where custom printing, bespoke colour or a new bag dimension is required.

Food-grade internal lacquer is applied on request, and with BOV the formulation sits inside the bag, so it does not contact the can wall in normal use. Tell us the fill and the destination market and we confirm the lacquer specification.

Yes — that is why this size uses a 32 mm bag instead of the 25 mm bag used at 30–125 ml. Send the viscosity and we confirm whether 32 mm is enough or whether the fill should move up to 300 ml.

Carton and pallet, with the bag and valve already assembled into the can. Tell us the market and we pack to the labelling you need.

You May Also Like