English
200 ml aluminium sunscreen spray can photographed at three-quarter view, wide-spray actuator and white cap fitted, plain body with no print

200 ml Aluminium Aerosol Can for Body Sunscreen Emulsion Spray

Sunscreen emulsions are the hardest cosmetic formula to spray well: they carry dispersed filters and an oil phase that separates if the pack stands for weeks. This 200 ml can is built around a valve and actuator pair that keeps the emulsion moving and lays it down as a film rather than a patchwork.

  • Place of originChina
  • Diameter range22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
  • PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
  • Port of loadingGuangzhou / Shenzhen / Ningbo / Shanghai
  • MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
  • Payment termsT/T, L/C, PayPal, Western Union — for your selection
  • Trade termEXW / DAP / DDP

Product Description

Sunscreen emulsions are the hardest cosmetic formula to spray well: they carry dispersed filters and an oil phase that separates if the pack stands for weeks. This 200 ml can is built around a valve and actuator pair that keeps the emulsion moving and lays it down as a film rather than a patchwork.

Key format data: 200 ml nominal capacity. Typical filling applications are sunscreen, continuous spray, after-sun. Other heights and diameters in the same family can be quoted on request, so the size listed here is a starting point rather than a limit.

This aluminium container is produced in-house from aluminium slug to finished printed can. Body forming, shoulder shaping, internal coating, printing and final inspection all run on the same line, so the wall thickness and pressure performance stay consistent from the first sample to the last pallet of a bulk order.

We supply cans only, or a complete package with valve, actuator and cap selected to match your formulation and filling equipment. Free blank samples are available so your laboratory can confirm pressure, spray rate and compatibility before you commit to tooling or a production run.

Specifications

MaterialAluminium 99.5% (one-piece / monobloc body)
DiameterRecommended based on your requirements
HeightRecommended based on your requirements
Nominal volume / weight200 ml
Neck / valve sizeRecommended based on your requirements
Shoulder shapeRecommended based on your requirements
Recommended contentsSunscreen, continuous spray, after-sun
Internal coatingFood-grade internal lacquer on request
PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
Surface finishHigh gloss / matte / pearl / metallic lacquer
CapPlastic cap — colour matched to your artwork
PackingCarton + pallet, or as per customer instruction
MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
Lead time15–30 days after sample approval

Final specifications are confirmed against your artwork and filling line before tooling.

Product Features

  • Film uniformity starts at the outlet. Too small a bore and dried emulsion bridges it between uses; too large and the spray arrives as wet slugs that soak one patch of skin.
  • An actuator with a mechanical breakup insert does work the propellant cannot: it shears the emulsion into an even pattern, so film thickness across a forearm stays within a narrow band.
  • Because the particulate load is high, the valve is specified with a filter and a bore that pass agglomerates instead of metering them, which is what keeps output steady across a filled can.
  • Aluminium reacts with acidic UV filters and electrolyte carriers when they sit against bare metal, so an internal lacquer is applied and cured before the body goes to print.
  • Shake-before-use belongs on the container, not on a carton: direct print lets a two-line agitation note sit near the neck, where the thumb lands before the first press.
  • The 200 ml fill is sized for two adults across a beach week, so a family pack does not need a second size, and the body still fits a tote side pocket.

Application Scenarios

Body and shoulder coverage

Held about 20 cm from the shoulder and swept downward, the pattern covers a broad area per pass, which matters when application happens on a windy beach.

Kids' sun application

A wide, even pattern cuts the rubbing needed after spraying, and the film can be spread while still wet instead of after it has dried into patches.

Sport and outdoor retail

Cyclists and runners want fast reapplication at the car boot; this fill gives several full-body passes without a pump bottle in the kit.

Private-label sun lines

Brands building a summer range on one body can separate SPF tiers with a coloured ring on the actuator while keeping the same can and filling setup.

Samples & MOQ

Free Blank Samples

Blank cans are supplied free of charge — you only cover the courier cost. Use them to test pressure, spray rate and formulation compatibility.

MOQ 10,000 pcs

Standard MOQ is 10,000 pieces per size and design. Smaller trial quantities can be discussed for a first production run.

Sampling In 3–7 Days

Printed samples typically take 3–7 days. Mass production follows 15–30 days after you approve the pre-production sample.

Customization Options

DiameterStandard range 22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
HeightCustom height from 90 mm to 300 mm (subject to diameter)
Printing1–9 colours offset or silkscreen, plus lacquer and vacuum coating
ValveOne-inch continuous / metered / bag-on-valve, matched to your formulation
CapStandard or custom moulded cap, any colour
SamplesFree blank samples for compatibility testing; printed samples charged

Frequently Asked Questions

Mineral particles settle and can dry at the tip. Specify a filtered valve with a bore sized to your particle load, and keep the actuator covered between uses; the overcap is part of the clogging answer, not just packaging.

For most emulsions, yes. The lacquer is applied on request and cured before decoration; it separates acidic filters and salts from the aluminium wall, and it is the usual fix for discolouration starting at the dome.

It can, with a different valve and a bag inside. A propellant-mixed pack costs less per unit; a bag build keeps gas out of the emulsion, which suits formulas that must not aerate during use.

Nine colours direct on the body. Sunscreen panels carry dense legal copy, so reserve a flat band for the SPF and warning block where small type stays legible on a curved surface.