English
White 100 ml aluminium all over spray bottle with a wide actuator, shown beside a plain body and matching collar rings

100 ml All Over Spray Bottle in Aluminium for Body Mist

An all over spray bottle is judged on coverage rather than on the fragrance note: the same fill has to reach a shoulder or a back in a few passes, so the actuator and the valve are chosen for output instead of for a fine, quiet mist.

  • Place of originChina
  • Diameter range22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
  • PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
  • Port of loadingGuangzhou / Shenzhen / Ningbo / Shanghai
  • MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
  • Payment termsT/T, L/C, PayPal, Western Union — for your selection
  • Trade termEXW / DAP / DDP

Product Description

An all over spray bottle is judged on coverage rather than on the fragrance note: the same fill has to reach a shoulder or a back in a few passes, so the actuator and the valve are chosen for output instead of for a fine, quiet mist.

Key format data: 100 ml nominal capacity. Other heights and diameters in the same family can be quoted on request, so the size listed here is a starting point rather than a limit.

This aluminium container is produced in-house from aluminium slug to finished printed can. Body forming, shoulder shaping, internal coating, printing and final inspection all run on the same line, so the wall thickness and pressure performance stay consistent from the first sample to the last pallet of a bulk order.

We supply cans only, or a complete package with valve, actuator and cap selected to match your formulation and filling equipment. Free blank samples are available so your laboratory can confirm pressure, spray rate and compatibility before you commit to tooling or a production run.

Specifications

MaterialAluminium 99.5% (one-piece / monobloc body)
DiameterRecommended based on your requirements
HeightRecommended based on your requirements
Nominal volume / weight100 ml
Neck / valve sizeRecommended based on your requirements
Shoulder shapeRecommended based on your requirements
Recommended contents—
Internal coatingFood-grade internal lacquer on request
PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
Surface finishHigh gloss / matte / pearl / metallic lacquer
CapPlastic cap — colour matched to your artwork
PackingCarton + pallet, or as per customer instruction
MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
Lead time15–30 days after sample approval

Final specifications are confirmed against your artwork and filling line before tooling.

Product Features

  • Wide-angle actuator over a standard valve: the cone is opened up so one pass covers a band of skin instead of a single spot.
  • An all over spray is used at arm's length, so the pattern has to stay coherent at that distance and not only close to the nozzle.
  • Output per stroke is higher than a fragrance mist, which is why a 100 ml fill empties faster here and the pack is specified with that in mind.
  • A 100 ml body sits at the balance point in the hand for a full-arm sweep; moving to a taller 120 ml body changes the wrist angle noticeably.
  • Body mist formulations carry more water and less alcohol than a fragrance, so valve and wetted polymer parts are specified against the formulation rather than the category.
  • The same body takes a fine-mist actuator if the SKU moves to fragrance, so one bottle and two actuators covers both lines.

Application Scenarios

Body mist and all over spray

Arm's-length application where coverage per pass is the specification rather than droplet fineness.

Hair and scalp mist

Wider patterns suit a large, non-precise target where a fine fragrance cone would take too long.

Linen and fabric mist

A 100 ml body is a convenient size for a home and travel fabric refresher.

Cooling and after-sun

Large-area application where a narrow mist would need repeated passes over the same area.

Samples & MOQ

Free Blank Samples

Blank cans are supplied free of charge — you only cover the courier cost. Use them to test pressure, spray rate and formulation compatibility.

MOQ 10,000 pcs

Standard MOQ is 10,000 pieces per size and design. Smaller trial quantities can be discussed for a first production run.

Sampling In 3–7 Days

Printed samples typically take 3–7 days. Mass production follows 15–30 days after you approve the pre-production sample.

Customization Options

DiameterStandard range 22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
HeightCustom height from 90 mm to 300 mm (subject to diameter)
Printing1–9 colours offset or silkscreen, plus lacquer and vacuum coating
ValveOne-inch continuous / metered / bag-on-valve, matched to your formulation
CapStandard or custom moulded cap, any colour
SamplesFree blank samples for compatibility testing; printed samples charged

Frequently Asked Questions

10,000 pieces per size and design; 20,000 pieces where the actuator is a bespoke tool or the print needs a custom set of plates.

Yes. The neck family is shared, so the same 100 ml body runs either a wide-angle all over actuator or a fine fragrance one; the difference is actuator and valve, not bottle.

The valve sets flow and the actuator sets pattern, so widening the cone without changing the valve mostly spreads the same volume. Send the formulation and the area to cover and both parts are specified together.

For a body mist it is the usual retail size and a full-body application normally takes more than one pass. Where the SKU promises full coverage per use, the 120 ml body is the better match.

You May Also Like