English
A 60 ml gloss black aluminium protective spray can with valve and spray head, standing beside a shoulder bag to show the commuter scale of the body

60 ml Gloss Black Aluminium Protective Spray Can for Commuter Shoulder Bags

Sixty millilitres is the point where a can reads as commuter equipment rather than pocket equipment: long enough to hold with three fingers, still short enough to sit in the flat front pocket of a shoulder bag. Gloss black survives a day of transit better than a textured finish, because the surface wipes clean.

  • Place of originChina
  • Diameter range22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
  • PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
  • Port of loadingGuangzhou / Shenzhen / Ningbo / Shanghai
  • MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
  • Payment termsT/T, L/C, PayPal, Western Union — for your selection
  • Trade termEXW / DAP / DDP

Product Description

Sixty millilitres is the point where a can reads as commuter equipment rather than pocket equipment: long enough to hold with three fingers, still short enough to sit in the flat front pocket of a shoulder bag. Gloss black survives a day of transit better than a textured finish, because the surface wipes clean.

Key format data: 60 ml nominal capacity. Typical filling applications are pepper spray, self-defense spray. Other heights and diameters in the same family can be quoted on request, so the size listed here is a starting point rather than a limit.

This aluminium container is produced in-house from aluminium slug to finished printed can. Body forming, shoulder shaping, internal coating, printing and final inspection all run on the same line, so the wall thickness and pressure performance stay consistent from the first sample to the last pallet of a bulk order.

We supply cans only, or a complete package with valve, actuator and cap selected to match your formulation and filling equipment. Free blank samples are available so your laboratory can confirm pressure, spray rate and compatibility before you commit to tooling or a production run.

Specifications

MaterialAluminium 99.5% (one-piece / monobloc body)
DiameterRecommended based on your requirements
HeightRecommended based on your requirements
Nominal volume / weight60 ml
Neck / valve sizeRecommended based on your requirements
Shoulder shapeRecommended based on your requirements
Recommended contentsPepper spray, self-defense spray
Internal coatingFood-grade internal lacquer on request
PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
Surface finishHigh gloss / matte / pearl / metallic lacquer
CapPlastic cap — colour matched to your artwork
PackingCarton + pallet, or as per customer instruction
MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
Lead time15–30 days after sample approval

Final specifications are confirmed against your artwork and filling line before tooling.

Product Features

  • Body length leaves room for a three-finger grip under the spray head, the hold most people use when pulling a can out of a bag with one hand.
  • Gloss lacquer goes on before the artwork, and its closed surface means spilled hand gel or rain comes off without leaving a dull patch behind.
  • Valve and spray head are separate components on the same crimp used across the small sizes, so both can be colour-matched or contrasted at order stage.
  • A drawn aluminium body has no longitudinal seam, and therefore no seam ridge to catch on the zip tape of an inner bag pocket.
  • Sixty millilitres carries a full working week of commuting for most users, while the body still drops into a coat pocket when the bag is left behind.
  • Bulk runs 15–30 days after you approve the sample; payment is by T/T, L/C, PayPal or Western Union, loading at Guangzhou, Shenzhen, Ningbo or Shanghai.

Application Scenarios

Commuter Shoulder Bags

The front slip pocket of a shoulder bag takes this body upright, so the spray head sits at the top of the pocket where a hand expects it.

Late-Shift Travel

For staff leaving after dark, one unit in the bag covers the walk to the car park without a second item in a coat pocket.

Corporate Safety Gifts

Employers ordering in volume use the gloss black body as a neutral shell that carries a company mark without reading as a branded giveaway.

Multi-Pack Retail

Two-packs sell on the same shelf strip, and the flat-sided body keeps a printed sleeve from creasing at the shoulder.

Samples & MOQ

Free Blank Samples

Blank cans are supplied free of charge — you only cover the courier cost. Use them to test pressure, spray rate and formulation compatibility.

MOQ 10,000 pcs

Standard MOQ is 10,000 pieces per size and design. Smaller trial quantities can be discussed for a first production run.

Sampling In 3–7 Days

Printed samples typically take 3–7 days. Mass production follows 15–30 days after you approve the pre-production sample.

Customization Options

DiameterStandard range 22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
HeightCustom height from 90 mm to 300 mm (subject to diameter)
Printing1–9 colours offset or silkscreen, plus lacquer and vacuum coating
ValveOne-inch continuous / metered / bag-on-valve, matched to your formulation
CapStandard or custom moulded cap, any colour
SamplesFree blank samples for compatibility testing; printed samples charged

Frequently Asked Questions

The extra length gives a proper three-finger grip when the can is drawn upward from a pocket, and the fill lasts a week of commuting rather than a few days.

Any coated aluminium shows fine marks against keys and coins. The gloss coat is harder to scuff than a thin matte film, and marks polish out with a soft cloth.

The crimp accepts the standard 1 inch valve family, so pattern and delivery rate are chosen with your filler. Send the target pattern with the enquiry.

A vector file with spot colours named, plus a dieline showing the wrap position. Approving a printed blank sample first is the usual way to settle registration.