English
A 40 ml gloss black aluminium protective spray can with a red actuator on top, standing on a light grey surface, the red button picked out against the black body

40 ml Gloss Black Aluminium Protective Spray Can with Red Actuator for Handbag Carry

Forty millilitres adds a third more fill than the smallest size without leaving handbag territory. What buyers notice first is the red actuator: a colour block at the working end makes the top of the can readable at a glance, which matters when a counter assistant is packing several hundred units a day.

  • Place of originChina
  • Diameter range22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
  • PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
  • Port of loadingGuangzhou / Shenzhen / Ningbo / Shanghai
  • MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
  • Payment termsT/T, L/C, PayPal, Western Union — for your selection
  • Trade termEXW / DAP / DDP

Product Description

Forty millilitres adds a third more fill than the smallest size without leaving handbag territory. What buyers notice first is the red actuator: a colour block at the working end makes the top of the can readable at a glance, which matters when a counter assistant is packing several hundred units a day.

Key format data: 40 ml nominal capacity. Typical filling applications are pepper spray, self-defense spray. Other heights and diameters in the same family can be quoted on request, so the size listed here is a starting point rather than a limit.

This aluminium container is produced in-house from aluminium slug to finished printed can. Body forming, shoulder shaping, internal coating, printing and final inspection all run on the same line, so the wall thickness and pressure performance stay consistent from the first sample to the last pallet of a bulk order.

We supply cans only, or a complete package with valve, actuator and cap selected to match your formulation and filling equipment. Free blank samples are available so your laboratory can confirm pressure, spray rate and compatibility before you commit to tooling or a production run.

Specifications

MaterialAluminium 99.5% (one-piece / monobloc body)
DiameterRecommended based on your requirements
HeightRecommended based on your requirements
Nominal volume / weight40 ml
Neck / valve sizeRecommended based on your requirements
Shoulder shapeRecommended based on your requirements
Recommended contentsPepper spray, self-defense spray
Internal coatingFood-grade internal lacquer on request
PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
Surface finishHigh gloss / matte / pearl / metallic lacquer
CapPlastic cap — colour matched to your artwork
PackingCarton + pallet, or as per customer instruction
MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
Lead time15–30 days after sample approval

Final specifications are confirmed against your artwork and filling line before tooling.

Product Features

  • Red against gloss black is a deliberate contrast pair, so the press point stays findable when the can lies loose among keys, receipts and a phone.
  • The actuator is a separate moulded part crimped on the 1 inch valve, so a family of variants can be split by button colour without new print plates.
  • Forty millilitres of fill sits behind a body short enough for an inside handbag pocket, and the gloss base coat holds the black even across the shoulder curve.
  • Button travel is short and the return spring sits inside the valve, so a press released halfway closes the orifice instead of leaving product to dribble.
  • Every batch passes in-house pressure and burst testing before dispatch, the check that catches a badly set crimp rather than a badly registered print.
  • Blank samples come free before tooling; putting a custom print on this size lifts the minimum order from 10,000 pcs to 20,000 pcs per design.

Application Scenarios

Handbag Interior

The red button doubles as a finder in a bag with a dark lining, where a black can tends to vanish between a purse and a phone.

Twin-Variant Ranges

Run one artwork and two button colours to give a retailer a good, better pairing without doubling plate costs or print setup time.

Counter Display Units

A red top reads from two metres, so a counter unit stays legible when the cans are packed shoulder to shoulder in a shallow tray.

Private Label Launch

Brands entering the category often begin with a 40 ml line, where the fill cost stays low and the print area still carries a full label.

Samples & MOQ

Free Blank Samples

Blank cans are supplied free of charge — you only cover the courier cost. Use them to test pressure, spray rate and formulation compatibility.

MOQ 10,000 pcs

Standard MOQ is 10,000 pieces per size and design. Smaller trial quantities can be discussed for a first production run.

Sampling In 3–7 Days

Printed samples typically take 3–7 days. Mass production follows 15–30 days after you approve the pre-production sample.

Customization Options

DiameterStandard range 22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
HeightCustom height from 90 mm to 300 mm (subject to diameter)
Printing1–9 colours offset or silkscreen, plus lacquer and vacuum coating
ValveOne-inch continuous / metered / bag-on-valve, matched to your formulation
CapStandard or custom moulded cap, any colour
SamplesFree blank samples for compatibility testing; printed samples charged

Frequently Asked Questions

Yes. The actuator is moulded separately from the can, so its colour is set at assembly. Only the body artwork needs plates, and that artwork can stay untouched.

No. It is a positional cue only, so a user can see which end fires. The seal is made by the valve itself, and retail copy should not describe the colour as a safety seal.

The standard 1 inch (25.4 mm) crimp used across this range. If your fill line already runs that cup size, the actuator drops onto your existing valve stem.

Samples in 3–7 days, then 15–30 days for bulk after you sign off the sample. Both figures assume artwork is final before the plates are ordered.