English
330 ml aluminium protective spray can with a broad lever pad under a lift-off overcap, printed barrel visible, photographed against a neutral backdrop.

330 ml Protective Spray Can with Lever Handle for Shared Homes and Rotating Counters

Households that keep one container for several adults run into a simple problem: grip strength and hand size differ, and a fingertip actuator asks both to be the same. The lever head on this 330 ml body is pressed with the heel of the hand, so the action does not depend on finger strength or on finding a blade in the dark. An overcap blocks the pad until it is lifted.

  • Place of originChina
  • Diameter range22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
  • PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
  • Port of loadingGuangzhou / Shenzhen / Ningbo / Shanghai
  • MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
  • Payment termsT/T, L/C, PayPal, Western Union — for your selection
  • Trade termEXW / DAP / DDP

Product Description

Households that keep one container for several adults run into a simple problem: grip strength and hand size differ, and a fingertip actuator asks both to be the same. The lever head on this 330 ml body is pressed with the heel of the hand, so the action does not depend on finger strength or on finding a blade in the dark. An overcap blocks the pad until it is lifted.

Key format data: 330 ml nominal capacity. Typical filling applications are pepper spray, self-defense spray. Other heights and diameters in the same family can be quoted on request, so the size listed here is a starting point rather than a limit.

This aluminium container is produced in-house from aluminium slug to finished printed can. Body forming, shoulder shaping, internal coating, printing and final inspection all run on the same line, so the wall thickness and pressure performance stay consistent from the first sample to the last pallet of a bulk order.

We supply cans only, or a complete package with valve, actuator and cap selected to match your formulation and filling equipment. Free blank samples are available so your laboratory can confirm pressure, spray rate and compatibility before you commit to tooling or a production run.

Specifications

MaterialAluminium 99.5% (one-piece / monobloc body)
DiameterRecommended based on your requirements
HeightRecommended based on your requirements
Nominal volume / weight330 ml
Neck / valve sizeRecommended based on your requirements
Shoulder shapeRecommended based on your requirements
Recommended contentsPepper spray, self-defense spray
Internal coatingFood-grade internal lacquer on request
PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
Surface finishHigh gloss / matte / pearl / metallic lacquer
CapPlastic cap — colour matched to your artwork
PackingCarton + pallet, or as per customer instruction
MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
Lead time15–30 days after sample approval

Final specifications are confirmed against your artwork and filling line before tooling.

Product Features

  • The lever is a broad pad hinged at the rear of the cap and pressed by the heel of the hand, so the stroke loads the palm and wrist rather than the finger flexors.
  • Because the action is a downward push instead of a squeeze, an adult with a weaker grip or a braced wrist can still operate it; that is why shared households ask for the lever.
  • Lever travel is blocked while the overcap is on, so a hand closing over the top of the can meets the cap shell instead of the pad.
  • A 330 ml barrel gives the lever housing a wider footprint and lifts the pad clear of the shelf, which matters when the can lives among crockery or stock.
  • The shoulder is formed in the same draw as the body, so the cap seats on a concentric rim rather than on a welded cone; the wall itself is one seamless Aluminium 99.5% piece.
  • Nine-colour direct printing leaves the lower barrel as a flat field for a usage line, and the upper panel takes a household name or a property marker.

Application Scenarios

Shared kitchen shelf

Several adults in one house pick up the same can; a palm press works whatever the hand size, and the overcap makes the stowed state the blocked state.

Counter staff rotation

Where a small team shares one unit behind a counter, nobody has to learn a finger position, and a staff member with a strapped wrist is not left out.

Guest house reception

A guest house keeps a unit at the desk for whoever is on duty, and the flat lower panel takes a short instruction line that reads at arm's length.

Shared workshop

In a shared workshop the can is wiped down between users, and the seamless drawn wall takes a damp cloth without a seam line to collect residue.

Samples & MOQ

Free Blank Samples

Blank cans are supplied free of charge — you only cover the courier cost. Use them to test pressure, spray rate and formulation compatibility.

MOQ 10,000 pcs

Standard MOQ is 10,000 pieces per size and design. Smaller trial quantities can be discussed for a first production run.

Sampling In 3–7 Days

Printed samples typically take 3–7 days. Mass production follows 15–30 days after you approve the pre-production sample.

Customization Options

DiameterStandard range 22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
HeightCustom height from 90 mm to 300 mm (subject to diameter)
Printing1–9 colours offset or silkscreen, plus lacquer and vacuum coating
ValveOne-inch continuous / metered / bag-on-valve, matched to your formulation
CapStandard or custom moulded cap, any colour
SamplesFree blank samples for compatibility testing; printed samples charged

Frequently Asked Questions

It is coarser: the press moves the whole hand, so aim is set by the wrist before the stroke begins. Users who expect to correct direction mid-burst usually prefer the trigger head.

Yes. The pad takes the heel of the hand, so glove bulk changes nothing about the contact point, which is the main reason shared sites choose this head.

The barrel is common; only the head and the cap differ. A buyer can order both heads against one printed body and split the run by head type at the filling stage.

The cap covers the shoulder rim, so the barrel and the upper body stay clear for nine-colour direct printing, including a line of text below the shoulder.