English
470 ml aluminium protective spray can with a trigger handle and long printed barrel, shown side-on to display the guard and the depth of the grip.

470 ml Protective Spray Can with Trigger Handle for Extended Patrol Carry

Patrol work puts a container through a different routine from counter storage: it is clipped on at the start of a round, carried through weather, and taken off at the end. The 470 ml body and its trigger head are specified for that pattern, with a guarded blade that can be found by feel and a handle set back to keep the nozzle level. Cans ship unfilled, with the head packed separately for the filling line.

  • Place of originChina
  • Diameter range22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
  • PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
  • Port of loadingGuangzhou / Shenzhen / Ningbo / Shanghai
  • MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
  • Payment termsT/T, L/C, PayPal, Western Union — for your selection
  • Trade termEXW / DAP / DDP

Product Description

Patrol work puts a container through a different routine from counter storage: it is clipped on at the start of a round, carried through weather, and taken off at the end. The 470 ml body and its trigger head are specified for that pattern, with a guarded blade that can be found by feel and a handle set back to keep the nozzle level. Cans ship unfilled, with the head packed separately for the filling line.

Key format data: 470 ml nominal capacity. Typical filling applications are pepper spray, self-defense spray. Other heights and diameters in the same family can be quoted on request, so the size listed here is a starting point rather than a limit.

This aluminium container is produced in-house from aluminium slug to finished printed can. Body forming, shoulder shaping, internal coating, printing and final inspection all run on the same line, so the wall thickness and pressure performance stay consistent from the first sample to the last pallet of a bulk order.

We supply cans only, or a complete package with valve, actuator and cap selected to match your formulation and filling equipment. Free blank samples are available so your laboratory can confirm pressure, spray rate and compatibility before you commit to tooling or a production run.

Specifications

MaterialAluminium 99.5% (one-piece / monobloc body)
DiameterRecommended based on your requirements
HeightRecommended based on your requirements
Nominal volume / weight470 ml
Neck / valve sizeRecommended based on your requirements
Shoulder shapeRecommended based on your requirements
Recommended contentsPepper spray, self-defense spray
Internal coatingFood-grade internal lacquer on request
PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
Surface finishHigh gloss / matte / pearl / metallic lacquer
CapPlastic cap — colour matched to your artwork
PackingCarton + pallet, or as per customer instruction
MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
Lead time15–30 days after sample approval

Final specifications are confirmed against your artwork and filling line before tooling.

Product Features

  • A 470 ml fill is sized for a guard who draws one container at the start of a round and keeps it on the belt until that round ends.
  • The blade sits inside the guard at the front of the handle, so the hand can find it by feel while the other hand holds a radio, a torch or a gate key.
  • Filled, the 470 ml body carries its mass forward; the handle is set back under the shoulder so the nozzle does not dip when the arm is extended.
  • Aluminium 99.5%, drawn as one piece: a belt clamp closes on a continuous wall rather than on a weld that could fatigue across months of use.
  • Batches are pressure and burst tested in-house, and trigger heads from the same run are fitted and cycled to check the stem seal before release.
  • Cans travel unfilled with the head packed separately, so a filling line can crimp, charge and then fit the trigger at the end of the sequence.

Application Scenarios

Gatehouse post

A gatehouse keeps the unit on a hook by the window; the guarded blade is found without looking while the other hand works a barrier control.

Vehicle bracket

Clamped in a cab, the can rides through vibration, and the handle sits low enough that the nozzle clears the bracket lip when the arm comes up.

Event stewarding

Stewards on a perimeter carry one unit for a whole event; the 470 ml fill avoids a mid-duty swap and the handle stays usable under a hi-vis layer.

Loading bay cover

Bay supervisors work in gloves with a clipboard in one hand, and the trigger guard keeps the blade from being pressed when the can is set down on a ledge.

Samples & MOQ

Free Blank Samples

Blank cans are supplied free of charge — you only cover the courier cost. Use them to test pressure, spray rate and formulation compatibility.

MOQ 10,000 pcs

Standard MOQ is 10,000 pieces per size and design. Smaller trial quantities can be discussed for a first production run.

Sampling In 3–7 Days

Printed samples typically take 3–7 days. Mass production follows 15–30 days after you approve the pre-production sample.

Customization Options

DiameterStandard range 22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
HeightCustom height from 90 mm to 300 mm (subject to diameter)
Printing1–9 colours offset or silkscreen, plus lacquer and vacuum coating
ValveOne-inch continuous / metered / bag-on-valve, matched to your formulation
CapStandard or custom moulded cap, any colour
SamplesFree blank samples for compatibility testing; printed samples charged

Frequently Asked Questions

The blade is inside the guard at the front of the handle, so it can be located without looking. A lever on top asks the thumb to find the pad while the hand is already closing.

It can ship separately, which is the usual arrangement for a filling line: the body is crimped and charged first, then the head is pressed onto the stem at the end.

The body has no moulded mounting lug. Buyers normally specify a clamp or a pouch that closes on the barrel, which is continuous because the wall is drawn in one piece.

10,000 pcs per size and design covers a standard body; 20,000 pcs applies once printing or specification is bespoke. Samples take 3–7 days to prepare.