English
A 40 ml aluminium protective spray can with a flush push-button top and no cap, shown in three-quarter view on a white background to make the flat shoulder visible

40 ml Aluminium Protective Spray Can with Push-Button Top for Discreet Pocket Carry

Where the brief asks for something that does not announce itself, this 40 ml can is built around a push-button top that finishes level with the shoulder. Nothing stands proud of the rim, so the silhouette stays a plain cylinder from any angle.

  • Place of originChina
  • Diameter range22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
  • PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
  • Port of loadingGuangzhou / Shenzhen / Ningbo / Shanghai
  • MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
  • Payment termsT/T, L/C, PayPal, Western Union — for your selection
  • Trade termEXW / DAP / DDP

Product Description

Where the brief asks for something that does not announce itself, this 40 ml can is built around a push-button top that finishes level with the shoulder. Nothing stands proud of the rim, so the silhouette stays a plain cylinder from any angle.

Key format data: 40 ml nominal capacity. Typical filling applications are pepper spray, self-defense spray. Other heights and diameters in the same family can be quoted on request, so the size listed here is a starting point rather than a limit.

This aluminium container is produced in-house from aluminium slug to finished printed can. Body forming, shoulder shaping, internal coating, printing and final inspection all run on the same line, so the wall thickness and pressure performance stay consistent from the first sample to the last pallet of a bulk order.

We supply cans only, or a complete package with valve, actuator and cap selected to match your formulation and filling equipment. Free blank samples are available so your laboratory can confirm pressure, spray rate and compatibility before you commit to tooling or a production run.

Specifications

MaterialAluminium 99.5% (one-piece / monobloc body)
DiameterRecommended based on your requirements
HeightRecommended based on your requirements
Nominal volume / weight40 ml
Neck / valve sizeRecommended based on your requirements
Shoulder shapeRecommended based on your requirements
Recommended contentsPepper spray, self-defense spray
Internal coatingFood-grade internal lacquer on request
PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
Surface finishHigh gloss / matte / pearl / metallic lacquer
CapPlastic cap — colour matched to your artwork
PackingCarton + pallet, or as per customer instruction
MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
Lead time15–30 days after sample approval

Final specifications are confirmed against your artwork and filling line before tooling.

Product Features

  • The button sits inside the shoulder contour instead of on a raised collar, which leaves the rim as the highest point of the whole assembly.
  • With no actuator collar to catch, the can slides into a jacket pocket without hooking the lining, and a folded edge is less likely to find the button.
  • A flat top also hands the printer a clean band: the 9-colour direct print wraps from shoulder to base with no cap recess to step over.
  • Aluminium 99.5% drawn in one piece means there is no soldered joint along the body to open up when the can is squeezed in a pocket over months.
  • Forty millilitres keeps the format inside the palm, and the crimp is the same one used on the other small sizes, so filling heads do not change.
  • Orders begin at 10,000 pcs per size and design; sample cans ship in 3–7 days and bulk follows 15–30 days after sample approval.

Application Scenarios

Concealed Daily Carry

A flush top gives a pocket-carried can a neutral outline, which suits buyers who want the object to read as an ordinary aerosol at a glance.

Workwear & Uniform

Trouser pockets on uniforms are cut tight; a body with no protruding collar pulls out cleanly when a staff member needs it in a hurry.

Own-Brand Essentials

Retailers building a plain-label safety shelf use this shape because it photographs as a simple cylinder and needs no cap in the pack shot.

Gift-with-Purchase

Low fill cost and a flat top make it easy to shrink-wrap against a card, with the design printed straight onto the aluminium.

Samples & MOQ

Free Blank Samples

Blank cans are supplied free of charge — you only cover the courier cost. Use them to test pressure, spray rate and formulation compatibility.

MOQ 10,000 pcs

Standard MOQ is 10,000 pieces per size and design. Smaller trial quantities can be discussed for a first production run.

Sampling In 3–7 Days

Printed samples typically take 3–7 days. Mass production follows 15–30 days after you approve the pre-production sample.

Customization Options

DiameterStandard range 22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
HeightCustom height from 90 mm to 300 mm (subject to diameter)
Printing1–9 colours offset or silkscreen, plus lacquer and vacuum coating
ValveOne-inch continuous / metered / bag-on-valve, matched to your formulation
CapStandard or custom moulded cap, any colour
SamplesFree blank samples for compatibility testing; printed samples charged

Frequently Asked Questions

It lowers the chance of an edge finding the button, but it is not a lock. A hard object pressing straight down can still actuate it, so copy should not promise otherwise.

Yes, a moulded cap can be specified, though it adds height above the rim. Most buyers choose the flush top precisely because they want no cap in the pack.

The full cylindrical band from shoulder to base, roughly the same as a capped can, with the top surface itself left unprinted as bare aluminium.

They leave from Guangzhou, Shenzhen, Ningbo or Shanghai, paid by T/T, L/C, PayPal or Western Union, with packing agreed against your fill line's intake.