English
330 ml aluminium protective spray can with a trigger handle and guarded blade, shown with its printed shop instruction panel against a plain background.

330 ml Protective Spray Can with Trigger Handle for Shop Floor and Counter Duty

A container that moves between whoever is on the shop floor has to suit every hand that picks it up, and that is the brief behind this housing. The 330 ml body carries a trigger head with a deep handle and a guarded blade, so a tall member of staff and a shorter one take the same grip. Printing is applied to the barrel before filling, which leaves room for a store's own instruction block.

  • Place of originChina
  • Diameter range22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
  • PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
  • Port of loadingGuangzhou / Shenzhen / Ningbo / Shanghai
  • MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
  • Payment termsT/T, L/C, PayPal, Western Union — for your selection
  • Trade termEXW / DAP / DDP

Product Description

A container that moves between whoever is on the shop floor has to suit every hand that picks it up, and that is the brief behind this housing. The 330 ml body carries a trigger head with a deep handle and a guarded blade, so a tall member of staff and a shorter one take the same grip. Printing is applied to the barrel before filling, which leaves room for a store's own instruction block.

Key format data: 330 ml nominal capacity. Typical filling applications are pepper spray, self-defense spray. Other heights and diameters in the same family can be quoted on request, so the size listed here is a starting point rather than a limit.

This aluminium container is produced in-house from aluminium slug to finished printed can. Body forming, shoulder shaping, internal coating, printing and final inspection all run on the same line, so the wall thickness and pressure performance stay consistent from the first sample to the last pallet of a bulk order.

We supply cans only, or a complete package with valve, actuator and cap selected to match your formulation and filling equipment. Free blank samples are available so your laboratory can confirm pressure, spray rate and compatibility before you commit to tooling or a production run.

Specifications

MaterialAluminium 99.5% (one-piece / monobloc body)
DiameterRecommended based on your requirements
HeightRecommended based on your requirements
Nominal volume / weight330 ml
Neck / valve sizeRecommended based on your requirements
Shoulder shapeRecommended based on your requirements
Recommended contentsPepper spray, self-defense spray
Internal coatingFood-grade internal lacquer on request
PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
Surface finishHigh gloss / matte / pearl / metallic lacquer
CapPlastic cap — colour matched to your artwork
PackingCarton + pallet, or as per customer instruction
MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
Lead time15–30 days after sample approval

Final specifications are confirmed against your artwork and filling line before tooling.

Product Features

  • The handle is deep enough for a full hand, so the index finger lands on the blade without the user choking up and putting a thumb over the valve cup.
  • Blade travel is short and the return spring is firm, so a hanging coat or a shelf edge brushing the guard will not complete the stroke.
  • A 330 ml barrel carries a two-line brand block on the front and a duty sticker on the back without crowding the shoulder print.
  • Drawn in a single piece from Aluminium 99.5%; with no side seam, the surface takes the damp cloth a shop wipes over equipment at closing.
  • The 1 inch (25.4 mm) crimp takes the trigger head, and the same cup will accept a lever head or a plain cap if the format changes later.
  • Pressure and burst testing are carried out in-house on each batch, with a trigger head fitted to a sample from the run to confirm the stem is not strained.

Application Scenarios

Shift handover

One container passes between staff at the change of shift; the deep handle means the incoming user takes the same grip as the outgoing one without adjusting anything.

Under-counter position

A 330 ml can sits in a drawer or on a shelf below the till, and the guard keeps the blade from being pressed when the drawer is pushed shut.

Workshop reception

Studios and repair shops put a unit by the entrance; the printed barrel can carry opening hours on one line and a short procedure on the other.

Closing routine

Staff who lock up alone carry the unit through the building, and the handle keeps the hand away from the nozzle while keys and a torch take the other hand.

Samples & MOQ

Free Blank Samples

Blank cans are supplied free of charge — you only cover the courier cost. Use them to test pressure, spray rate and formulation compatibility.

MOQ 10,000 pcs

Standard MOQ is 10,000 pieces per size and design. Smaller trial quantities can be discussed for a first production run.

Sampling In 3–7 Days

Printed samples typically take 3–7 days. Mass production follows 15–30 days after you approve the pre-production sample.

Customization Options

DiameterStandard range 22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
HeightCustom height from 90 mm to 300 mm (subject to diameter)
Printing1–9 colours offset or silkscreen, plus lacquer and vacuum coating
ValveOne-inch continuous / metered / bag-on-valve, matched to your formulation
CapStandard or custom moulded cap, any colour
SamplesFree blank samples for compatibility testing; printed samples charged

Frequently Asked Questions

The 1 inch (25.4 mm) cup is common to the trigger, the lever and a plain cap, so a buyer can change the head on the same body without new tooling for the can.

The housing sits above the shoulder, so the barrel and the lower shoulder stay free for nine-colour direct printing; artwork is checked against the head footprint before plates are made.

The blade accepts an index and middle finger inside the guard. A thin glove fits within that space; a heavy glove is better served by the lever head on the same body.

T/T, L/C, PayPal and Western Union are accepted, and containers load from Guangzhou, Shenzhen, Ningbo or Shanghai.