English
Black 200 ml aluminium protective spray can with a moulded trigger handle, forward thumb safety tab and printed barrel, standing upright in a studio setting.

200 ml Protective Spray Can with Trigger Handle for Hallway and Vehicle Standby

Buyers who keep a protective spray within arm's length of a hallway or a car door tend to ask one thing of the housing: it should not fire when something else bumps it. A guarded blade and a thumb tab behind the trigger answer that, so the container can stand upright in a door pocket with fabric pressed against it. Filling, crimping and printing all run on the same 1 inch valve family used across the range.

  • Place of originChina
  • Diameter range22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
  • PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
  • Port of loadingGuangzhou / Shenzhen / Ningbo / Shanghai
  • MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
  • Payment termsT/T, L/C, PayPal, Western Union — for your selection
  • Trade termEXW / DAP / DDP

Product Description

Buyers who keep a protective spray within arm's length of a hallway or a car door tend to ask one thing of the housing: it should not fire when something else bumps it. A guarded blade and a thumb tab behind the trigger answer that, so the container can stand upright in a door pocket with fabric pressed against it. Filling, crimping and printing all run on the same 1 inch valve family used across the range.

Key format data: 200 ml nominal capacity. Typical filling applications are pepper spray, self-defense spray. Other heights and diameters in the same family can be quoted on request, so the size listed here is a starting point rather than a limit.

This aluminium container is produced in-house from aluminium slug to finished printed can. Body forming, shoulder shaping, internal coating, printing and final inspection all run on the same line, so the wall thickness and pressure performance stay consistent from the first sample to the last pallet of a bulk order.

We supply cans only, or a complete package with valve, actuator and cap selected to match your formulation and filling equipment. Free blank samples are available so your laboratory can confirm pressure, spray rate and compatibility before you commit to tooling or a production run.

Specifications

MaterialAluminium 99.5% (one-piece / monobloc body)
DiameterRecommended based on your requirements
HeightRecommended based on your requirements
Nominal volume / weight200 ml
Neck / valve sizeRecommended based on your requirements
Shoulder shapeRecommended based on your requirements
Recommended contentsPepper spray, self-defense spray
Internal coatingFood-grade internal lacquer on request
PrintingUp to 9 colours · offset lithography, silkscreen, lacquer, vacuum coating
Surface finishHigh gloss / matte / pearl / metallic lacquer
CapPlastic cap — colour matched to your artwork
PackingCarton + pallet, or as per customer instruction
MOQ10,000 pcs per size and design · 20,000 pcs for custom printing and bespoke specifications
Lead time15–30 days after sample approval

Final specifications are confirmed against your artwork and filling line before tooling.

Product Features

  • A moulded trigger guard wraps the blade on three sides, so discharge needs a deliberate index-and-middle-finger squeeze after the thumb tab has been pushed forward.
  • The tab sits behind the blade rather than on the cap, which keeps the safety action inside the same grip the user has already taken on the handle.
  • Body is Aluminium 99.5%, drawn as one seamless piece; there is no longitudinal weld, so the printed panel runs unbroken and no seam holds condensation after a cold night in a vehicle.
  • Every batch leaves the line after in-house pressure and burst testing, and the crimp is gauged against the 1 inch (25.4 mm) cup the actuator seats on.
  • At 200 ml the housing stays compact enough to stand upright on a shelf or in a door pocket, while the trigger gives the hand a handle the bare barrel cannot.
  • Nine-colour direct printing runs over the shoulder and the barrel, leaving the back panel for a fill date, a batch code and a short instruction block.

Application Scenarios

Hallway shelf storage

A 200 ml can stands on a shelf or inside a cupboard without a bracket, and the guard takes the knocks that bags and coats deliver in a narrow hallway.

Vehicle door pocket

Upright storage in a door pocket means vibration and temperature swing; the drawn body has no seam to hold water and the guard resists side pressure from the pocket wall.

Front desk drawer

Staff lift it by the handle instead of the barrel, so the nozzle stays pointed away from the hand during a drawer pull and the tab re-engages on release.

Single-counter retail

For a counter that keeps only one unit on hand, the 200 ml fill stays light enough to aim with one hand while the other holds a phone or a door.

Samples & MOQ

Free Blank Samples

Blank cans are supplied free of charge — you only cover the courier cost. Use them to test pressure, spray rate and formulation compatibility.

MOQ 10,000 pcs

Standard MOQ is 10,000 pieces per size and design. Smaller trial quantities can be discussed for a first production run.

Sampling In 3–7 Days

Printed samples typically take 3–7 days. Mass production follows 15–30 days after you approve the pre-production sample.

Customization Options

DiameterStandard range 22 / 25 / 28 / 35 / 38 / 40 / 45 / 50 / 53 / 59 / 66 mm
HeightCustom height from 90 mm to 300 mm (subject to diameter)
Printing1–9 colours offset or silkscreen, plus lacquer and vacuum coating
ValveOne-inch continuous / metered / bag-on-valve, matched to your formulation
CapStandard or custom moulded cap, any colour
SamplesFree blank samples for compatibility testing; printed samples charged

Frequently Asked Questions

Yes. Both seat on the standard 1 inch (25.4 mm) valve cup, so one crimping station can run either head and only the actuator feed has to change.

It returns on spring pressure as the fingers leave the blade, and because it is a forward-sliding tab at the rear of the guard, a thumb can re-set it by feel.

10,000 pcs per size and design at standard specification, 20,000 pcs where the print or the specification is bespoke. Samples run 3–7 days; bulk 15–30 days after sample approval.

The trigger head travels separately from the body and a dust cap covers the valve cup, so the blade is not loaded against a carton wall in transit.